HDU 1950(LIS)

Posted 若有恒,何必三更起五更眠;最无益,莫过一日曝十日寒。

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了HDU 1950(LIS)相关的知识,希望对你有一定的参考价值。

题目链接:

http://acm.hdu.edu.cn/showproblem.php?pid=1950

Bridging signals

Time Limit: 5000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others)
Total Submission(s): 3711    Accepted Submission(s): 2337


Problem Description
‘Oh no, they‘ve done it again‘, cries the chief designer at the Waferland chip factory. Once more the routing designers have screwed up completely, making the signals on the chip connecting the ports of two functional blocks cross each other all over the place. At this late stage of the process, it is too
expensive to redo the routing. Instead, the engineers have to bridge the signals, using the third dimension, so that no two signals cross. However, bridging is a complicated operation, and thus it is desirable to bridge as few signals as possible. The call for a computer program that finds the maximum number of signals which may be connected on the silicon surface without rossing each other, is imminent. Bearing in mind that there may be housands of signal ports at the boundary of a functional block, the problem asks quite a lot of the programmer. Are you up to the task?
技术分享图片
Figure 1. To the left: The two blocks‘ ports and their signal mapping (4,2,6,3,1,5). To the right: At most three signals may be routed on the silicon surface without crossing each other. The dashed signals must be bridged.

A typical situation is schematically depicted in figure 1. The ports of the two functional blocks are numbered from 1 to p, from top to bottom. The signal mapping is described by a permutation of the numbers 1 to p in the form of a list of p unique numbers in the range 1 to p, in which the i:th number pecifies which port on the right side should be connected to the i:th port on the left side.
Two signals cross if and only if the straight lines connecting the two ports of each pair do.
 

 

Input
On the first line of the input, there is a single positive integer n, telling the number of test scenarios to follow. Each test scenario begins with a line containing a single positive integer p<40000, the number of ports on the two functional blocks. Then follow p lines, describing the signal mapping: On the i:th line is the port number of the block on the right side which should be connected to the i:th port of the block on the left side.
 

 

Output
For each test scenario, output one line containing the maximum number of signals which may be routed on the silicon surface without crossing each other.
 

 

Sample Input
4
6
4
2
6
3
1
5
1
0
2
3
4
5
6
7
8
9
1
0
1
8
8
7
6
5
4
3
2
1
9
5
8
9
2
3
1
7
4
6
 
 

 

Sample Output
3
9
1
4
 分析:
LIS问题,采用n*logn的算法优化一下
#include<bits/stdc++.h>
#define max_v 100005
using namespace std;
int a[max_v],dp[max_v],len;
int select(int x)
{
    int l,r,m;
    l=0;
    r=len;
    while(l<r)
    {
        m=l+(r-l)/2;
        if(dp[m]>=x)
        {
            r=m;
        }else
        {
            l=m+1;
        }
    }
    return l;
}
int main()
{
    int t;
    scanf("%d",&t);
    while(t--)
    {
        int n;
        scanf("%d",&n);
        for(int i=1; i<=n; i++)
        {
            scanf("%d",&a[i]);
        }
        //dp[k]代表长度为k的LIS序列的最末元素,若有多个长度为k的上升子序列,则记录最小的那个最末元素
        //dp[]中的元素是单调递增的,二分优化的时候利用这个性质

        dp[1]=a[1];
        len=1;
        for(int i=2; i<=n; i++)
        {
            if(a[i]>dp[len])
            {
                dp[++len]=a[i];
            }
            else
            {
                int j=select(a[i]);
                dp[j]=a[i];
            }
        }
        printf("%d\n",len);
    }
    return 0;
}

 











以上是关于HDU 1950(LIS)的主要内容,如果未能解决你的问题,请参考以下文章

hdu---1950---Bridging signals解题报告(求Lis n*logn贪心+二分搜索)

HDU1950-Bridging signals-最长上升子序列

hdu1160 LIS变形

HDU 4352:XHXJ's LIS

hdu 6197 array array array LIS

HDU - 4352 - XHXJ's LIS(数位DP)