POJ 2117 Electricity

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了POJ 2117 Electricity相关的知识,希望对你有一定的参考价值。

Time Limit: 5000MS   Memory Limit: 65536K
Total Submissions: 5573   Accepted: 1818

Description

Blackouts and Dark Nights (also known as ACM++) is a company that provides electricity. The company owns several power plants, each of them supplying a small area that surrounds it. This organization brings a lot of problems - it often happens that there is not enough power in one area, while there is a large surplus in the rest of the country. 

ACM++ has therefore decided to connect the networks of some of the plants together. At least in the first stage, there is no need to connect all plants to a single network, but on the other hand it may pay up to create redundant connections on critical places - i.e. the network may contain cycles. Various plans for the connections were proposed, and the complicated phase of evaluation of them has begun. 

One of the criteria that has to be taken into account is the reliability of the created network. To evaluate it, we assume that the worst event that can happen is a malfunction in one of the joining points at the power plants, which might cause the network to split into several parts. While each of these parts could still work, each of them would have to cope with the problems, so it is essential to minimize the number of parts into which the network will split due to removal of one of the joining points. 

Your task is to write a software that would help evaluating this risk. Your program is given a description of the network, and it should determine the maximum number of non-connected parts from that the network may consist after removal of one of the joining points (not counting the removed joining point itself). 

Input

The input consists of several instances. 

The first line of each instance contains two integers 1 <= P <= 10 000 and C >= 0 separated by a single space. P is the number of power plants. The power plants have assigned integers between 0 and P - 1. C is the number of connections. The following C lines of the instance describe the connections. Each of the lines contains two integers 0 <= p1, p2 < P separated by a single space, meaning that plants with numbers p1 and p2 are connected. Each connection is described exactly once and there is at most one connection between every two plants. 

The instances follow each other immediately, without any separator. The input is terminated by a line containing two zeros. 

Output

The output consists of several lines. The i-th line of the output corresponds to the i-th input instance. Each line of the output consists of a single integer C. C is the maximum number of the connected parts of the network that can be obtained by removing one of the joining points at power plants in the instance.

Sample Input

3 3
0 1
0 2
2 1
4 2
0 1
2 3
3 1
1 0
0 0

Sample Output

1
2
2

Source

 
题目大意 
求去除一个点后 最多有几个连通块 
Tarjan求割点 
#include <cstring>
#include <ctype.h>
#include <cstdio>
#define N 20005
void read(int &x)
{
    x=0;char ch=getchar();
    for(;!isdigit(ch);ch=getchar());
    for(;isdigit(ch);ch=getchar()) x=x*10+ch-0;
}
struct Edge
{
    int next,to;
    Edge (int next=0,int to=0) :next(next),to(to) {}
}edge[N<<1];
bool vis[N],cutpoint[N];
int sumcol,ans,head[N],cnt=-1,n,m,dfn[N],low[N],tim;
void init()
{
    memset(head,-1,sizeof(head));
    cnt=-1;
    memset(edge,0,sizeof(edge));
    ans=0;
    sumcol=0;
    tim=0;
    memset(dfn,0,sizeof(dfn));
    memset(vis,0,sizeof(vis));
    memset(low,0,sizeof(low)); 
}
void insert(int u,int v)
{
    edge[++cnt]=Edge(head[u],v);
    head[u]=cnt;
}
int max(int a,int b) {return a>b?a:b;}
int min(int a,int b) {return a>b?b:a;}
void tarjan(int x,int pre)
{
    vis[x]=1;
    low[x]=dfn[x]=++tim;
    int sum=0;
    int tot=0;
    for(int u=head[x];u!=-1;u=edge[u].next)
    {
        if(!vis[edge[u].to])
        {
            sum++;
            tarjan(edge[u].to,x);
            low[x]=min(low[x],low[edge[u].to]);
            if(low[edge[u].to]>=dfn[x]) tot++;
        }
        else if(dfn[edge[u].to]<dfn[x]&&edge[u].to!=pre) low[x]=min(low[x],dfn[edge[u].to]);
    }
    if(pre==-1) {if(sum>1) ans=max(ans,sum-1);}
    else ans=max(ans,tot);
}
int main()
{
    while(scanf("%d%d",&n,&m)!=EOF&&(n||m))
    {
        init();
        if(m==0)
        {
            printf("%d\n",n-1);
            continue;
        }
        for(int x,y;m--;)
        {
            read(x);
            read(y);
            insert(x,y);
            insert(y,x);
        }
        for(int i=0;i<n;i++)
        {
            if(!vis[i]) 
            {
                sumcol++;
                tarjan(i,-1);
            }
        }
        printf("%d\n",sumcol+ans);
    }
    return 0;
}

 

以上是关于POJ 2117 Electricity的主要内容,如果未能解决你的问题,请参考以下文章

POJ 2117 Electricity

POJ——T2117 Electricity

poj 2117 Electricity

[POJ2117]Electricity(连通分量,割点)

Poj2117 Electricity(电力)

POJ2117 Electricity