cisco asa5200防火墙配置问题，，，我配置了各个端口，接下来不知道该怎么去配置，希望高手指点一下.

Posted 2023-04-15

详细配置为：ciscoasa# show run
: Saved
:
ASA Version 7.0(6)
!
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
names
dns-guard
!
interface GigabitEthernet0/0
duplex full
nameif inside
security-level 100
ip address 192.168.1.200 255.255.255.0
!
interface GigabitEthernet0/1
duplex full
nameif outside
security-level 0
ip address 202.100.10.2 255.255.255.0
!
interface GigabitEthernet0/2
nameif dmz
security-level 50
ip address 192.168.2.1 255.255.255.0
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif guanli
security-level 0
ip address 192.168.3.10 255.255.255.0
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
access-list outside_access_in extended permit ip any any
access-list inside_access_in extended permit ip any any
pager lines 24
mtu inside 1500
mtu outside 1500
mtu dmz 1500
mtu guanli 1500
no failover
asdm image disk0:/asdm-61551.bin
no asdm history enable
arp timeout 14400
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 10.0.0.0 255.0.0.0 192.168.1.201 1
route outside 0.0.0.0 0.0.0.0 202.100.10.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
username ciscoasa password /UjAtDCQKBMK5MtL encrypted
http server enable
http 192.168.3.0 255.255.255.0 guanli
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
service-policy global_policy global
Cryptochecksum:626089057fcd13e7561ef7b4df3457b0
: end
ciscoasa#

access-list outside_access_in extended permit ip any any
access-list inside_access_in extended permit ip any any
这两句可以再改改，定义得精确一点，另外我看你还应该做一下NAT吧，首先要确保内网与外网能通，然后在这个基础上面对内网做更精确的访问控制 参考技术A asd faweafdsvsdvaweq

cisco asa防火墙关机命令是啥

没有关机命令。

不过有重新加载配置的命令，相当于重启。

命令：reload

CISCO分为三种模式 ：
1、用户模式，提示符：SWITHC>和ROUTER> 只能进行一些简单的查询工作, 输入命令：enable进入特权模式。
2、特权模式，提示符：SWITHC#和ROUTER#相对于用户模式它所能查询的功能要强大很多，例如，查看端口，查看协议等等 输入configure terminal 进入全局模式。
3、全局模式，此模式下拥有完全的权限，可以根据CISCO设备进行相应的设置。

参考技术A 关闭开关,拔掉电源 参考技术B 关闭开关,拔掉电源