[Kinect]XBox One Kinect连接Windows

Posted 2020-07-02 Welcome!

     注：本文全原创，作者：Noah Zhang  (http://www.cnblogs.com/noahzn/)

 

    XBox One带体感套装去年就买了，昨天京东349元入了个适配器，下午就送到了，开箱。

 

 

 

    按照说明书把Kinect通过适配器连接电脑，我是Win10操作系统。

 

    官方给出的硬件要求如下：

Your computer must have the following minimum capabilities:

• 64 bit (x64) processor
• 4 GB Memory (or more)
• I7 3.1 GHz (or higher)
• Built-in USB 3.0 host controller (Intel or Renesas chipset).   （电脑要有USB3.0接口）

  If you\'re adding USB 3.0 functionality to your existing PC through an adapter, please ensure that it is a Windows 8 compliant device and that it supports Gen-2. See the troubleshooting section of Getting Started for more information.

• DX11 capable graphics adapter (see list of known good adapters below)   （支持DX11的显卡，我用的是HD5770）
  • Intel HD 4400 integrated display adapter
  • ATI Radeon HD 5400 series
  • ATI Radeon HD 6570
  • ATI Radeon HD 7800 (256-bit GDDR5 2GB/1000Mhz)
  • NVidia Quadro 600
  • NVidia GeForce GT 640
  • NVidia GeForce GTX 660
  • NVidia Quadro K1000M
• A Kinect v2 sensor, which includes a power hub and USB cabling.

 

    连接之后，会自动安装驱动程序，装完之后，下载Kinect for Windows SDK2.0并安装

          （链接: http://pan.baidu.com/s/1ca7zwM 密码: 7n5u）

    安装完毕后，打开Kinect Studio，记得先连接设备哦~

 

    然后就可以看到Kinect采集的画面了。

 

 

    也可以打开SDK Browser，看看深度图像。