linux安装oracle 11g rac
Posted
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了linux安装oracle 11g rac相关的知识，希望对你有一定的参考价值。
安装oracle 11gR2 RAC
一、网络规划及安装虚拟主机
|
主机名 |
主机版本 |
Ip |
|
rac1.localdomain |
Redhat 6.5 RAC节点1 |
192.168.100.11 |
|
rac2.localdomain |
Redhat 6.5 RAC节点2 |
192.168.100.12 |
|
Loaclhost.localdomain |
Redhat 5.8 DNS服务器 |
192.168.100.9 |
|
Short hostname |
type |
Ip address |
interface |
|
rac1 |
Public ip |
192.168.100.11 |
Eth0 |
|
rac1-vip |
Virtul ip |
192.168.100.13 |
Eth0:1 |
|
rac1-priv |
Private ip |
192.168.10.11 |
Eth1 |
|
rac2 |
Public ip |
192.168.100.12 |
Eth0 |
|
rac2-vip |
Virtul ip |
192.168.100.14 |
Eth0:1 |
|
rac2-priv |
Private ip |
192.168.10.12 |
Eth1 |
|
Scancluster |
Scan ip |
192.168.100.10 |
Eth0 |
二、RAC 安装前期配置
1、配置/etc/host文件（rac1、rac2上执行）
127.0.0.1 localhost
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
#rac1
192.168.100.11 rac1
192.168.100.13 rac1-vip
192.168.10.11 rac1-priv
#rac2
192.168.100.12 rac2
192.168.100.14 rac2-vip
192.168.10.12 rac2-priv
#scan-ip
192.168.100.10 scan-cluster
2、配置DNS服务器，解析scan ip（rhel5.8上执行）
1）安装dns包
[[email protected] mnt]# ll
total 1112
-rw-r--r-- 1 root root 1012559 Jan 22 11:11 bind-9.3.6-20.P1.el5.x86_64.rpm
-rw-r--r-- 1 root root 47941 Jan 22 11:14 bind-chroot-9.3.6-20.P1.el5.x86_64.rpm
-rw-r--r-- 1 root root 64667 Jan 22 11:11 caching-nameserver-9.3.6-20.P1.el5.x86_64.rpm
[[email protected] mnt]# rpm -ivh bind-9.3.6-20.P1.el5.x86_64.rpm
[[email protected] mnt]# rpm -ivh bind-chroot-9.3.6-20.P1.el5.x86_64.rpm
[[email protected] mnt]# rpm -ivh caching-nameserver-9.3.6-20.P1.el5.x86_64.rpm
2）配置named.conf文件
生成named.conf文件：
[[email protected] mnt]# cd /var/named/chroot/etc/
[[email protected] etc]# ll
total 24
-rw-r--r-- 1 root root 3519 Feb 27 2006 localtime
-rw-r----- 1 root named 1230 Dec 2 2011 named.caching-nameserver.conf
-rw-r----- 1 root named 955 Dec 2 2011 named.rfc1912.zones
-rw-r----- 1 root named 113 Jan 22 10:51 rndc.key
[[email protected] etc]# cp -p named.caching-nameserver.conf named.conf
[[email protected] etc]# ll
total 28
-rw-r--r-- 1 root root 3519 Feb 27 2006 localtime
-rw-r----- 1 root named 1230 Dec 2 2011 named.caching-nameserver.conf
-rw-r----- 1 root named 1230 Dec 2 2011 named.conf
-rw-r----- 1 root named 955 Dec 2 2011 named.rfc1912.zones
-rw-r----- 1 root named 113 Jan 22 10:51 rndc.key
配置named.conf文件：
[[email protected] etc]# vim named.conf
将127.0.0.1和localhost全部改成any。
3）配置named.rfc1912.zones文件
[[email protected] etc]# vim named.rfc1912.zones --在最后添加下面内容
zone "100.168.192.in-addr.arpa" IN {
type master;
file "100.168.192.in-addr.arpa";
allow-update { none; };
};
4）生成正反向解析数据库文件
[[email protected] named]# pwd
/var/named/chroot/var/named
[[email protected] named]# ll
total 44
drwxrwx--- 2 named named 4096 Aug 26 2004 data
-rw-r----- 1 root named 198 Dec 2 2011 localdomain.zone
-rw-r----- 1 root named 195 Dec 2 2011 localhost.zone
-rw-r----- 1 root named 427 Dec 2 2011 named.broadcast
-rw-r----- 1 root named 1892 Dec 2 2011 named.ca
-rw-r----- 1 root named 424 Dec 2 2011 named.ip6.local
-rw-r----- 1 root named 426 Dec 2 2011 named.local
-rw-r----- 1 root named 427 Dec 2 2011 named.zero
drwxrwx--- 2 named named 4096 Jul 27 2004 slaves
[[email protected] named]# cp -p named.local 100.168.192.in-addr.arpa
[[email protected] named]# ll
total 48
-rw-r----- 1 root named 426 Dec 2 2011 100.168.192.in-addr.arpa
drwxrwx--- 2 named named 4096 Aug 26 2004 data
-rw-r----- 1 root named 198 Dec 2 2011 localdomain.zone
-rw-r----- 1 root named 195 Dec 2 2011 localhost.zone
-rw-r----- 1 root named 427 Dec 2 2011 named.broadcast
-rw-r----- 1 root named 1892 Dec 2 2011 named.ca
-rw-r----- 1 root named 424 Dec 2 2011 named.ip6.local
-rw-r----- 1 root named 426 Dec 2 2011 named.local
-rw-r----- 1 root named 427 Dec 2 2011 named.zero
drwxrwx--- 2 named named 4096 Jul 27 2004 slaves
5）配置正向解析数剧库文件
[[email protected] named]# vim localdomain.zone
[[email protected] named]# cat localdomain.zone
$TTL 86400
@ IN SOA localhost root (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN NS localhost
localhost IN A 127.0.0.1
scan-cluster IN A 192.168.100.10
6）配置反向解析数据库文件
[[email protected] named]# vim 100.168.192.in-addr.arpa
[[email protected] named]# cat 100.168.192.in-addr.arpa
$TTL 86400
@ IN SOA localhost. root.localhost. (
1997022700 ; Serial
28800 ; Refresh
14400 ; Retry
3600000 ; Expire
86400 ) ; Minimum
IN NS localhost.
1 IN PTR localhost.
10 IN PTR scan-cluster.localdomain
7）服务器上启动DNS服务器
[[email protected] named]# /etc/init.d/named status
rndc: connect failed: 127.0.0.1#953: connection refused
named is stopped
[[email protected] named]# /etc/init.d/named start
Starting named: [ OK ]
8）配置/etc/resolv.conf文件（rac1、rac2上执行）
[[email protected] ~]# vim /etc/resolv.conf
[[email protected] ~]# cat /etc/resolv.conf
# Generated by NetworkManager
search localdomain
# No nameservers found; try putting DNS servers into your
# ifcfg files in /etc/sysconfig/network-scripts like so:
#
# DNS1=xxx.xxx.xxx.xxx
# DNS2=xxx.xxx.xxx.xxx
# DOMAIN=lab.foo.com bar.foo.com
nameserver 192.168.100.9
9）nslookup检查（rac1、rac2上检验）
[[email protected] ~]# nslookup 192.168.100.10
Server: 192.168.100.9
Address: 192.168.100.9#53
10.100.168.192.in-addr.arpa name = scan-cluster.localdomain
[[email protected] ~]# nslookup scan-cluster
Server: 192.168.100.9
Address: 192.168.100.9#53
Name: scan-cluster.localdomain
Address: 192.168.100.10
3、建组、用户、环境变量、内核参数等（rac1、rac2上执行）
节点1执行以下脚本：
#!/bin/bash
#Usage:Log on as the superuser(‘root‘),and then execute the command:#./1preusers.sh
groupadd -g 1000 oinstall
groupadd -g 1200 asmadmin
groupadd -g 1201 asmdba
groupadd -g 1202 asmoper
groupadd -g 1300 dba
groupadd -g 1301 oper
useradd -u 1100 -g oinstall -G asmadmin,asmdba,asmoper,dba -d /home/grid -s /bin/bash -c "grid Infrastructure Owner" grid
echo "grid" | passwd --stdin grid
echo "export TMP=/tmp">> /home/grid/.bash_profile
echo ‘export TMPDIR=$TMP‘>>/home/grid/.bash_profile
echo "export ORACLE_SID=+ASM1">> /home/grid/.bash_profile
echo "export ORACLE_BASE=/u01/app/grid">> /home/grid/.bash_profile
echo "export ORACLE_HOME=/u01/app/11.2.0/grid">> /home/grid/.bash_profile
echo "export ORACLE_TERM=xterm">> /home/grid/.bash_profile
echo "export NLS_DATE_FORMAT=‘yyyy/mm/dd hh24:mi:ss‘" >> /home/grid/.bash_profile
echo ‘export TNS_ADMIN=$ORACLE_HOME/network/admin‘ >> /home/grid/.bash_profile
echo ‘export PATH=/usr/sbin:$PATH‘>> /home/grid/.bash_profile
echo ‘export PATH=$ORACLE_HOME/bin:$PATH‘>> /home/grid/.bash_profile
echo ‘export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib‘>> /home/grid/.bash_profile
echo ‘export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib‘>> /home/grid/.bash_profile
echo "export LANG=en_US" >> /home/grid/.bash_profile
echo "export NLS_LANG=american_america.AL32UTF8" >> /home/grid/.bash_profile
useradd -u 1101 -g oinstall -G dba,oper,asmdba -d /home/oracle -s /bin/bash -c "Oracle Software Owner" oracle
echo "oracle" | passwd --stdin oracle
echo "export TMP=/tmp">> /home/oracle/.bash_profile
echo ‘export TMPDIR=$TMP‘>>/home/oracle/.bash_profile
echo "export ORACLE_HOSTNAME=rac1.localdomain">> /home/oracle/.bash_profile
echo "export ORACLE_SID=devdb1">> /home/oracle/.bash_profile
echo "export ORACLE_BASE=/u01/app/oracle">> /home/oracle/.bash_profile
echo ‘export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1‘>> /home/oracle/.bash_profile
echo "export ORACLE_UNQNAME=devdb">> /home/oracle/.bash_profile
echo ‘export TNS_ADMIN=$ORACLE_HOME/network/admin‘ >> /home/oracle/.bash_profile
echo "export ORACLE_TERM=xterm">> /home/oracle/.bash_profile
echo ‘export PATH=/usr/sbin:$PATH‘>> /home/oracle/.bash_profile
echo ‘export PATH=$ORACLE_HOME/bin:$PATH‘>> /home/oracle/.bash_profile
echo ‘export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib‘>> /home/oracle/.bash_profile
echo ‘export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib‘>> /home/oracle/.bash_profile
echo "export LANG=en_US" >> /home/oracle/.bash_profile
echo "export NLS_LANG=american_america.AL32UTF8" >> /home/oracle/.bash_profile
echo "export NLS_DATE_FORMAT=‘yyyy/mm/dd hh24:mi:ss‘" >> /home/oracle/.bash_profile
echo "The Groups and users has been created"
echo "The Environment for grid,oracle also has been set successfully"
mkdir -p /u01/app/grid
mkdir -p /u01/app/11.2.0/grid
mkdir -p /u01/app/oracle
chown -R oracle:oinstall /u01
chown -R grid:oinstall /u01/app/grid
chown -R grid:oinstall /u01/app/11.2.0
chmod -R 775 /u01
cp /etc/security/limits.conf /etc/security/limits.conf.bak
echo "oracle soft nproc 2047" >>/etc/security/limits.conf
echo "oracle hard nproc 16384" >>/etc/security/limits.conf
echo "oracle soft nofile 1024" >>/etc/security/limits.conf
echo "oracle hard nofile 65536" >>/etc/security/limits.conf
echo "grid soft nproc 2047" >>/etc/security/limits.conf
echo "grid hard nproc 16384" >>/etc/security/limits.conf
echo "grid soft nofile 1024" >>/etc/security/limits.conf
echo "grid hard nofile 65536" >>/etc/security/limits.conf
cp /etc/pam.d/login /etc/pam.d/login.bak
echo "session required /lib/security/pam_limits.so" >>/etc/pam.d/login
echo "session required pam_limits.so" >>/etc/pam.d/login
cp /etc/profile /etc/profile.bak
echo ‘if [ $USER = "oracle" ]||[ $USER = "grid" ]; then‘ >> /etc/profile
echo ‘if [ $SHELL = "/bin/ksh" ]; then‘ >> /etc/profile
echo ‘ulimit -p 16384‘ >> /etc/profile
echo ‘ulimit -n 65536‘ >> /etc/profile
echo ‘else‘ >> /etc/profile
echo ‘ulimit -u 16384 -n 65536‘ >> /etc/profile
echo ‘fi‘ >> /etc/profile
echo ‘fi‘ >> /etc/profile
cp /etc/sysctl.conf /etc/sysctl.conf.bak
echo "fs.aio-max-nr = 1048576" >> /etc/sysctl.conf
echo "fs.file-max = 6815744" >> /etc/sysctl.conf
echo "kernel.shmall = 2097152" >> /etc/sysctl.conf
echo "kernel.shmmax = 4294967295" >> /etc/sysctl.conf
echo "kernel.shmmni = 4096" >> /etc/sysctl.conf
echo "kernel.sem = 250 32000 100 128" >> /etc/sysctl.conf
echo "net.ipv4.ip_local_port_range = 9000 65500" >> /etc/sysctl.conf
echo "net.core.rmem_default = 262144" >> /etc/sysctl.conf
echo "net.core.rmem_max = 4194304" >> /etc/sysctl.conf
echo "net.core.wmem_default = 262144" >> /etc/sysctl.conf
echo "net.core.wmem_max = 1048586" >> /etc/sysctl.conf
echo "net.ipv4.tcp_wmem = 262144 262144 262144" >> /etc/sysctl.conf
echo "net.ipv4.tcp_rmem = 4194304 4194304 4194304" >> /etc/sysctl.conf
sysctl -p
节点2执行以下脚本：
#!/bin/bash
#Usage:Log on as the superuser(‘root‘),and then execute the command:#./1preusers.sh
groupadd -g 1000 oinstall
groupadd -g 1200 asmadmin
groupadd -g 1201 asmdba
groupadd -g 1202 asmoper
groupadd -g 1300 dba
groupadd -g 1301 oper
useradd -u 1100 -g oinstall -G asmadmin,asmdba,asmoper,dba -d /home/grid -s /bin/bash -c "grid Infrastructure Owner" grid
echo "grid" | passwd --stdin grid
echo "export TMP=/tmp">> /home/grid/.bash_profile
echo ‘export TMPDIR=$TMP‘>>/home/grid/.bash_profile
echo "export ORACLE_SID=+ASM2">> /home/grid/.bash_profile
echo "export ORACLE_BASE=/u01/app/grid">> /home/grid/.bash_profile
echo "export ORACLE_HOME=/u01/app/11.2.0/grid">> /home/grid/.bash_profile
echo "export ORACLE_TERM=xterm">> /home/grid/.bash_profile
echo "export NLS_DATE_FORMAT=‘yyyy/mm/dd hh24:mi:ss‘" >> /home/grid/.bash_profile
echo ‘export TNS_ADMIN=$ORACLE_HOME/network/admin‘ >> /home/grid/.bash_profile
echo ‘export PATH=/usr/sbin:$PATH‘>> /home/grid/.bash_profile
echo ‘export PATH=$ORACLE_HOME/bin:$PATH‘>> /home/grid/.bash_profile
echo ‘export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib‘>> /home/grid/.bash_profile
echo ‘export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib‘>> /home/grid/.bash_profile
echo "export LANG=en_US" >> /home/grid/.bash_profile
echo "export NLS_LANG=american_america.AL32UTF8" >> /home/grid/.bash_profile
useradd -u 1101 -g oinstall -G dba,oper,asmdba -d /home/oracle -s /bin/bash -c "Oracle Software Owner" oracle
echo "oracle" | passwd --stdin oracle
echo "export TMP=/tmp">> /home/oracle/.bash_profile
echo ‘export TMPDIR=$TMP‘>>/home/oracle/.bash_profile
echo "export ORACLE_HOSTNAME=rac2.localdomain">> /home/oracle/.bash_profile
echo "export ORACLE_SID=devdb2">> /home/oracle/.bash_profile
echo "export ORACLE_BASE=/u01/app/oracle">> /home/oracle/.bash_profile
echo ‘export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1‘>> /home/oracle/.bash_profile
echo "export ORACLE_UNQNAME=devdb">> /home/oracle/.bash_profile
echo ‘export TNS_ADMIN=$ORACLE_HOME/network/admin‘ >> /home/oracle/.bash_profile
echo "export ORACLE_TERM=xterm">> /home/oracle/.bash_profile
echo ‘export PATH=/usr/sbin:$PATH‘>> /home/oracle/.bash_profile
echo ‘export PATH=$ORACLE_HOME/bin:$PATH‘>> /home/oracle/.bash_profile
echo ‘export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib‘>> /home/oracle/.bash_profile
echo ‘export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib‘>> /home/oracle/.bash_profile
echo "export LANG=en_US" >> /home/oracle/.bash_profile
echo "export NLS_LANG=american_america.AL32UTF8" >> /home/oracle/.bash_profile
echo "export NLS_DATE_FORMAT=‘yyyy/mm/dd hh24:mi:ss‘" >> /home/oracle/.bash_profile
echo "The Groups and users has been created"
echo "The Environment for grid,oracle also has been set successfully"
mkdir -p /u01/app/grid
mkdir -p /u01/app/11.2.0/grid
mkdir -p /u01/app/oracle
chown -R oracle:oinstall /u01
chown -R grid:oinstall /u01/app/grid
chown -R grid:oinstall /u01/app/11.2.0
chmod -R 775 /u01
cp /etc/security/limits.conf /etc/security/limits.conf.bak
echo "oracle soft nproc 2047" >>/etc/security/limits.conf
echo "oracle hard nproc 16384" >>/etc/security/limits.conf
echo "oracle soft nofile 1024" >>/etc/security/limits.conf
echo "oracle hard nofile 65536" >>/etc/security/limits.conf
echo "grid soft nproc 2047" >>/etc/security/limits.conf
echo "grid hard nproc 16384" >>/etc/security/limits.conf
echo "grid soft nofile 1024" >>/etc/security/limits.conf
echo "grid hard nofile 65536" >>/etc/security/limits.conf
cp /etc/pam.d/login /etc/pam.d/login.bak
echo "session required /lib/security/pam_limits.so" >>/etc/pam.d/login
echo "session required pam_limits.so" >>/etc/pam.d/login
cp /etc/profile /etc/profile.bak
echo ‘if [ $USER = "oracle" ]||[ $USER = "grid" ]; then‘ >> /etc/profile
echo ‘if [ $SHELL = "/bin/ksh" ]; then‘ >> /etc/profile
echo ‘ulimit -p 16384‘ >> /etc/profile
echo ‘ulimit -n 65536‘ >> /etc/profile
echo ‘else‘ >> /etc/profile
echo ‘ulimit -u 16384 -n 65536‘ >> /etc/profile
echo ‘fi‘ >> /etc/profile
echo ‘fi‘ >> /etc/profile
cp /etc/sysctl.conf /etc/sysctl.conf.bak
echo "fs.aio-max-nr = 1048576" >> /etc/sysctl.conf
echo "fs.file-max = 6815744" >> /etc/sysctl.conf
echo "kernel.shmall = 2097152" >> /etc/sysctl.conf
echo "kernel.shmmax = 4294967295" >> /etc/sysctl.conf
echo "kernel.shmmni = 4096" >> /etc/sysctl.conf
echo "kernel.sem = 250 32000 100 128" >> /etc/sysctl.conf
echo "net.ipv4.ip_local_port_range = 9000 65500" >> /etc/sysctl.conf
echo "net.core.rmem_default = 262144" >> /etc/sysctl.conf
echo "net.core.rmem_max = 4194304" >> /etc/sysctl.conf
echo "net.core.wmem_default = 262144" >> /etc/sysctl.conf
echo "net.core.wmem_max = 1048586" >> /etc/sysctl.conf
echo "net.ipv4.tcp_wmem = 262144 262144 262144" >> /etc/sysctl.conf
echo "net.ipv4.tcp_rmem = 4194304 4194304 4194304" >> /etc/sysctl.conf
sysctl -p
4、停止NTP服务（rac1、rac2上执行）
[[email protected] mnt]# service ntpd status
ntpd is stopped
[[email protected] mnt]# chkconfig ntpd off
[[email protected] mnt]# cp /etc/ntp.conf /etc/ntp.conf.bak
[[email protected] mnt]# rm /etc/ntp.conf -rf
5、配置grid用户和oracle用户ssh对等性
[[email protected] mnt]# su - grid
[[email protected] ~]$ pwd
/home/grid
[[email protected] ~]$ ls -al
total 44
drwx------. 4 grid oinstall 4096 Jan 22 12:55 .
drwxr-xr-x. 5 root root 4096 Jan 22 12:48 ..
-rw-------. 1 grid oinstall 19 Jan 22 12:55 .bash_history
-rw-r--r--. 1 grid oinstall 18 Jul 9 2013 .bash_logout
-rw-r--r--. 1 grid oinstall 677 Jan 22 12:48 .bash_profile
-rw-r--r--. 1 grid oinstall 124 Jul 9 2013 .bashrc
drwxr-xr-x. 2 grid oinstall 4096 Jul 14 2010 .gnome2
-rw-r--r--. 1 grid oinstall 171 Oct 16 2013 .kshrc
-rw-r--r--. 1 grid oinstall 124 Oct 24 2013 .mkshrc
drwxr-xr-x. 4 grid oinstall 4096 Jan 21 16:47 .mozilla
-rw-r--r--. 1 grid oinstall 658 Aug 6 2013 .zshrc
[[email protected] ~]$ mkdir .ssh
[[email protected] ~]$ ls -al
total 48
drwx------. 5 grid oinstall 4096 Jan 22 13:11 .
drwxr-xr-x. 5 root root 4096 Jan 22 12:48 ..
-rw-------. 1 grid oinstall 19 Jan 22 12:55 .bash_history
-rw-r--r--. 1 grid oinstall 18 Jul 9 2013 .bash_logout
-rw-r--r--. 1 grid oinstall 677 Jan 22 12:48 .bash_profile
-rw-r--r--. 1 grid oinstall 124 Jul 9 2013 .bashrc
drwxr-xr-x. 2 grid oinstall 4096 Jul 14 2010 .gnome2
-rw-r--r--. 1 grid oinstall 171 Oct 16 2013 .kshrc
-rw-r--r--. 1 grid oinstall 124 Oct 24 2013 .mkshrc
drwxr-xr-x. 4 grid oinstall 4096 Jan 21 16:47 .mozilla
drwxr-xr-x. 2 grid oinstall 4096 Jan 22 13:11 .ssh
-rw-r--r--. 1 grid oinstall 658 Aug 6 2013 .zshrc
[[email protected] ~]$ chmod 700 .ssh
[[email protected] ~]$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_rsa.
Your public key has been saved in /home/grid/.ssh/id_rsa.pub.
The key fingerprint is:
b8:28:a2:8a:cd:09:4e:54:e0:ba:9a:15:94:22:c0:4b [email protected]
The key‘s randomart image is:
+--[ RSA 2048]----+
|o. |
|oE.. |
|+.+. |
|o+. . |
|... . S |
|.. . . . |
|+.o . . |
|*B o |
|B.+ |
+-----------------+
[[email protected] ~]$ cd .ssh
[[email protected] .ssh]$ ls -al
total 16
drwx------. 2 grid oinstall 4096 Jan 22 13:13 .
drwx------. 5 grid oinstall 4096 Jan 22 13:11 ..
-rw-------. 1 grid oinstall 1675 Jan 22 13:13 id_rsa
-rw-r--r--. 1 grid oinstall 404 Jan 22 13:13 id_rsa.pub
[[email protected] .ssh]$ ssh-keygen -t dsa
Generating public/private dsa key pair.
Enter file in which to save the key (/home/grid/.ssh/id_dsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/grid/.ssh/id_dsa.
Your public key has been saved in /home/grid/.ssh/id_dsa.pub.
The key fingerprint is:
83:35:09:9a:b2:f5:41:ec:44:d1:d8:9b:ba:a6:6e:8f [email protected]
The key‘s randomart image is:
+--[ DSA 1024]----+
| o== |
| ++.o. |
| . +o. +o |
| + ..+o. |
| . o.S |
| . . |
| . |
| ..o |
| oE+. |
+-----------------+
[[email protected] .ssh]$ ls -al
total 24
drwx------. 2 grid oinstall 4096 Jan 22 13:14 .
drwx------. 5 grid oinstall 4096 Jan 22 13:11 ..
-rw-------. 1 grid oinstall 668 Jan 22 13:14 id_dsa
-rw-r--r--. 1 grid oinstall 612 Jan 22 13:14 id_dsa.pub
-rw-------. 1 grid oinstall 1675 Jan 22 13:13 id_rsa
-rw-r--r--. 1 grid oinstall 404 Jan 22 13:13 id_rsa.pub
生成authorized_keys文件
[[email protected] ~]$ cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
[[email protected] ~]$ cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys
[[email protected] .ssh]$ ssh rac2 cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
[[email protected] .ssh]$ ssh rac2 cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
[[email protected] .ssh]$ scp authorized_keys rac2:~/.ssh/authorized_keys
验证ssh对等性：
[[email protected] .ssh]$ ssh rac1 date
Fri Jan 22 13:38:04 CST 2016
[[email protected] .ssh]$ ssh rac2 date
Fri Jan 22 13:38:09 CST 2016
[[email protected] .ssh]$ ssh rac1-priv date
Fri Jan 22 13:38:15 CST 2016
[[email protected] .ssh]$ ssh rac2-priv date
Fri Jan 22 13:38:20 CST 2016
6、配置共享磁盘
1）创建6块共享磁盘并fdisk格式化。
2）安装asm rpm包：
[[email protected] ~]# cd /mnt
[[email protected] mnt]# ll
total 136
-rw-r--r--. 1 root root 33956 Jan 22 17:23 kmod-oracleasm-2.0.6.rh1-3.el6.x86_64.rpm
-rw-r--r--. 1 root root 13300 Jan 22 17:23 oracleasmlib-2.0.4-1.el6.x86_64.rpm
-rw-r--r--. 1 root root 74984 Jan 22 17:23 oracleasm-support-2.1.8-1.el6.x86_64.rpm
[[email protected] mnt]# rpm -qa|grep oracleasm
[[email protected] mnt]# rpm -ivh kmod-oracleasm-2.0.6.rh1-3.el6.x86_64.rpm
Preparing... ########################################### [100%]
1:kmod-oracleasm ########################################### [100%]
[[email protected] mnt]# rpm -ivh oracleasm-support-2.1.8-1.el6.x86_64.rpm
warning: oracleasm-support-2.1.8-1.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY
Preparing... ########################################### [100%]
1:oracleasm-support ########################################### [100%]
[[email protected] mnt]# rpm -ivh oracleasmlib-2.0.4-1.el6.x86_64.rpm
warning: oracleasmlib-2.0.4-1.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY
Preparing... ########################################### [100%]
1:oracleasmlib ########################################### [100%]
[[email protected] mnt]# rpm -qa|grep oracleasm
oracleasm-support-2.1.8-1.el6.x86_64
kmod-oracleasm-2.0.6.rh1-3.el6.x86_64
oracleasmlib-2.0.4-1.el6.x86_64
3）双节点配置asm driver服务
[[email protected] mnt]# /usr/sbin/oracleasm -h
Usage: oracleasm [--exec-path=<exec_path>] <command> [ <args> ]
oracleasm --exec-path
oracleasm -h
oracleasm -V
The basic oracleasm commands are:
configure Configure the Oracle Linux ASMLib driver
init Load and initialize the ASMLib driver
exit Stop the ASMLib driver
scandisks Scan the system for Oracle ASMLib disks
status Display the status of the Oracle ASMLib driver
listdisks List known Oracle ASMLib disks
querydisk Determine if a disk belongs to Oracle ASMlib
createdisk Allocate a device for Oracle ASMLib use
deletedisk Return a device to the operating system
renamedisk Change the label of an Oracle ASMlib disk
update-driver Download the latest ASMLib driver
[[email protected] mnt]# /usr/sbin/oracleasm status
Checking if ASM is loaded: no
Checking if /dev/oracleasm is mounted: no
[[email protected] mnt]# /usr/sbin/oracleasm configure -i
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets (‘[]‘). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: grid
Default group to own the driver interface []: asmadmin
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
[[email protected] mnt]# /usr/sbin/oracleasm status
Checking if ASM is loaded: no
Checking if /dev/oracleasm is mounted: no
[[email protected] mnt]# /usr/sbin/oracleasm init
Creating /dev/oracleasm mount point: /dev/oracleasm
Loading module "oracleasm": oracleasm
Mounting ASMlib driver filesystem: /dev/oracleasm
[[email protected] mnt]# /usr/sbin/oracleasm status
Checking if ASM is loaded: yes
Checking if /dev/oracleasm is mounted: yes
4）配置asm磁盘
节点1：
[[email protected] mnt]# /usr/sbin/oracleasm -h
Usage: oracleasm [--exec-path=<exec_path>] <command> [ <args> ]
oracleasm --exec-path
oracleasm -h
oracleasm -V
The basic oracleasm commands are:
configure Configure the Oracle Linux ASMLib driver
init Load and initialize the ASMLib driver
exit Stop the ASMLib driver
scandisks Scan the system for Oracle ASMLib disks
status Display the status of the Oracle ASMLib driver
listdisks List known Oracle ASMLib disks
querydisk Determine if a disk belongs to Oracle ASMlib
createdisk Allocate a device for Oracle ASMLib use
deletedisk Return a device to the operating system
renamedisk Change the label of an Oracle ASMlib disk
update-driver Download the latest ASMLib driver
[[email protected] mnt]# /usr/sbin/oracleasm listdisks
[[email protected] mnt]# /usr/sbin/oracleasm createdisk VOL1 /dev/sdb1
Writing disk header: done
Instantiating disk: done
[[email protected] mnt]# /usr/sbin/oracleasm createdisk VOL2 /dev/sdc1
Writing disk header: done
Instantiating disk: done
[[email protected] mnt]# /usr/sbin/oracleasm createdisk VOL3 /dev/sdd1
Writing disk header: done
Instantiating disk: done
[[email protected] mnt]# /usr/sbin/oracleasm createdisk VOL4 /dev/sde1
Writing disk header: done
Instantiating disk: done
[[email protected] mnt]# /usr/sbin/oracleasm createdisk VOL5 /dev/sdf1
Writing disk header: done
Instantiating disk: done
[[email protected] mnt]# /usr/sbin/oracleasm createdisk VOL6 /dev/sdg1
Writing disk header: done
Instantiating disk: done
[[email protected] mnt]# /usr/sbin/oracleasm listdisks
VOL1
VOL2
VOL3
VOL4
VOL5
VOL6
6）节点2添加asm磁盘：
[[email protected] mnt]# /usr/sbin/oracleasm -h
Usage: oracleasm [--exec-path=<exec_path>] <command> [ <args> ]
oracleasm --exec-path
oracleasm -h
oracleasm -V
The basic oracleasm commands are:
configure Configure the Oracle Linux ASMLib driver
init Load and initialize the ASMLib driver
exit Stop the ASMLib driver
scandisks Scan the system for Oracle ASMLib disks
status Display the status of the Oracle ASMLib driver
listdisks List known Oracle ASMLib disks
querydisk Determine if a disk belongs to Oracle ASMlib
createdisk Allocate a device for Oracle ASMLib use
deletedisk Return a device to the operating system
renamedisk Change the label of an Oracle ASMlib disk
update-driver Download the latest ASMLib driver
[[email protected] mnt]# /usr/sbin/oracleasm listdisks
[[email protected] mnt]# /usr/sbin/oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
Instantiating disk "VOL1"
Instantiating disk "VOL2"
Instantiating disk "VOL3"
Instantiating disk "VOL5"
Instantiating disk "VOL4"
Instantiating disk "VOL6"
[[email protected] mnt]# /usr/sbin/oracleasm listdisks
VOL1
VOL2
VOL3
VOL4
VOL5
VOL6
[[email protected] mnt]#
7、安装grid软件
1）上传安装介质，解压（一个节点即可）。
2）安装grid前预检查（一个节点即可）
[[email protected] grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -fixup -verbose
3）图形界面安装grid软件
以下图形界面安装略。
以上是关于linux安装oracle 11g rac的主要内容，如果未能解决你的问题，请参考以下文章
Oracle11gR2_RAC_for_redhat6.3 安装手册