交换机升级系统

Posted 2020-08-28

软件工具上的准备：准备好TFTP和相应的ios

运行中的H3C S5500 Series交换机系统升级操作
运行中的交换机在FALSH不足以考入新的软件时适用本方法速度速度比较慢
1、H3C S5500
（系统进入完成）
2、进入System View（系统视界）界面
<H3C>system-view

3、为交换机添加IP
[H3C]interface Vlan-interface 1 （回车进入Vlan-interface1设置）
[H3C-Vlan-interface1]ip address 1.1.1.2 255.0.0.0 （因为我的本机IP是1.1.1.1所以添加为IP1.1.1.2 还要设置子网掩码我这里的是255.0.0.0 然后回车）
上面显示交换机IP设置完成
4、下面我们来PING以下我的计算机，确认网络连接已建立
[H3C-Vlan-interface1]ping 1.1.1.1 （交换机1.1.1.2 PING 1.1.1.1）
PING 1.1.1.1: 56
data bytes, press CTRL_C to break
Reply from 1.1.1.1: bytes=56 Sequence=1 ttl=128 time=6 ms
通讯正常
5、配置PC上的tftp服务

6、在交换机系统视界下敲,通过TFTP从1.1.1.1 （我的计算机）获取系统文件

<H3C>tftp 1.1.1.1 get S5500EI-CMW520-R2208-S168.bin 

File will be transferred in binary mode Downloading file from remote TFTP server, please
wait...........................................................................................................................
TFTP: 12397691 bytes received in 612 second(s)
File downloaded successfully.
获取完成
7、将获取成功的文件定义为主系统文件
[H3C]quit 退出到系统底层< 括号>表示使用boot-loader 命令操作
boot-loader file flash:/s5500ei-cmw520-r2208-s168.bin slot 1 main 定义插槽1中闪存的文件s5500ei-cmw520-r2208-s168.bin 为主（main）
This command will set the boot file of the specified board. Continue? [Y/N]:y 回车
The specified file will be used as the main boot file at the next reboot on slot 1!
quit
******************************************************************************
* Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
*
* Without the owner‘s prior written consent,
*
* no decompiling or reverse-engineering shall be allowed.
*
******************************************************************************
User interface aux0 is available.
Please press ENTER.
reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
This command will reboot the device. Current configuration may be lost
in next startup if you
continue. Continue? [Y/N]:y
#Apr 26 12:19:00:744 2000 H3C DEV/1/REBOOT:
Reboot device by command.
%Apr 26 12:19:00:836 2000 H3C DEV/4/SYSTEM REBOOT:
System is rebooting now.
8、完成设置然后重启交换机
Starting......
***********************************************************
*
*
*
H3C S5500-28C-EI BOOTROM, V
ersion 609
*
*
*
***********************************************************
Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd.
Creation date
: Aug 10 2010, 18:57:57
CPU Clock Speed : 533MHz
BUS Clock Speed : 133MHz
Memory Size
: 256MB
Mac Address
: c4cad94a97de
Press Ctrl-B to enter Boot Menu... 0
Auto-booting...
Decompress
Image....................................................................................................................................................
..............................................................................................................................................................
..............................................................................................................................................................
...............................OK!
Startup configuration file does not exist.
It will take a long time to get configuration file, please wait...
Retrieving configuration file failed!
User interface aux0 is available.
重启完成
9、查看版本号
[H3C]dis ver
（版本查看命令）
H3C Comware Platform Software
Comware Software,
Version 5.20, Release 2208
对的
Copyright (c) 2004-2010 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C S5500-28C-EI uptime is 0 week, 0 day, 0 hour, 2 minutes
H3C S5500-28C-EI with 1 Processor
256M
bytes SDRAM
32768K
bytes Flash Memory
Hardware V
ersion is REV
.C
CPLD V
ersion is 002
Bootrom V
ersion is 609
[SubSlot 0] 24GE+4SFP Hardware V
ersion is REV
.C
全部完成