Fatal NI connect error 12170. sasa

Posted 2020-07-19

环境：oracle 11.2.0.4 r2 rac

今天在RAC两台服务器的日志文件alter日志中，发现如下信息：

***********************************************************************

Fatal NI connect error 12170.

  VERSION INFORMATION:

        TNS for Linux: Version 11.2.0.4.0 - Production

        Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production

        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.4.0 - Production

  Time: 21-MAY-2016 20:52:15

  Tracing not turned on.

  Tns error struct:

    ns main err code: 12535

    

TNS-12535: TNS:operation timed out

    ns secondary err code: 12560

    nt main err code: 505

    

TNS-00505: Operation timed out

    nt secondary err code: 110

    nt OS err code: 0

  Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.7)(PORT=41125))

Sat May 21 20:55:11 2016

***********************************************************************

查看mos，有幸发现关于该错误的相关文章

Fatal NI connect error 12170′, ‘TNS-12535: TNS:operation timed out’ Reported in 11g Alert Log [ID 1286376.1]

做了一些摘要，算是给自己做个记录，也给不能访问mos的朋友一个参考

1、适用范围

Oracle Net Services - Version: 11.1.0.6 to 11.2.0.2 - Release: 11.1 to 11.2

Oracle Server - Enterprise Edition - Version: 11.1.0.6 to 11.2.0.2   [Release: 11.1 to 11.2]

Information in this document applies to any platform.

2、问题原因

These time out related messages are mostly informational in nature.  The messages indicate the specified client connection (identified by the ‘Client address:‘ details) has experienced a time out.  The ‘nt secondary err code‘ identifies the underlying network transport, such as (TCP/IP) timeout limits after a client has abnormally terminated the database connection.

 

The ‘nt secondary err code‘ translates to underlying network transport timeouts for the following Operating Systems:

 

For the Solaris system: nt secondary err code: 145:

 

#define ETIMEDOUT 145 /* Connection timed out */

 

For the Linux operating system: nt secondary err code: 110

 

ETIMEDOUT 110 Connection timed out

 

For the HP-UX system: nt secondary err code: 238:

 

ETIMEDOUT 238 /* Connection timed out */

 

For Windows based platforms: nt secondary err code: 60 (which translates to Winsock Error: 10060)

 

Description:  A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

 

The reason the messages are written to the alert log is related to the use of the new 11g Automatic Diagnostic Repository (ADR) feature being enabled by default.

3、解决问题

To revert to Oracle Net Server tracing/logging, set following parameter in the server‘s sqlnet.ora :

 

DIAG_ADR_ENABLED = OFF

 

Also, to back out the ADR diag for the Listener component, set following parameter in the server‘s listener.ora:

 

DIAG_ADR_ENABLED_= OFF

 

   - Where thewould be replaced with the actual name of the configured listener(s) in the listener.ora configuration file.  For example, if the listener name is ‘LISTENER‘, the parameter would read:

 

DIAG_ADR_ENABLED_LISTENER = OFF

 

-Reload or restart the TNS Listener for the parameter change to take effect.

说明：这个问题是由于Automatic Diagnostic Repository中的 Oracle Net diagnostic在默认的情况下是开启的，当数据库和客户端的连接超过特定时间，就会把这样的信息写入到alert日志中，所以这不是一个致命的问题，如果偶尔出现，可以忽略有点类此ora-3136的错误

简化步骤：

1、在“/u01/app/11.2/grid/network/admin/listener.ora”文件中添加如下内容：

DIAG_ADR_ENABLED_LISTENER = OFF

DIAG_ADR_ENABLED_LISTENER_SCAN1 = OFF

2、在“/u01/app/11.2/grid/network/admin/sqlnet.ora”文件中添加如下内容：

DIAG_ADR_ENABLED = OFF

3、创建“/u01/app/oracle/product/11.2/db_1/network/admin/sqlnet.ora”文件，内容如下：

NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)

DIAG_ADR_ENABLED = OFF

DEFAULT_SDU_SIZE = 8192

4、单实例重新导入配置即可生效

lsnrctl reload

5、oracle 11g r2 rac使用srvctl进行管理

srvctl stop listener

srvctl start listener