USB Composite 组合设备之多路CDC实现
Posted aron566
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了USB Composite 组合设备之多路CDC实现相关的知识，希望对你有一定的参考价值。
USB Composite 组合设备之多路CDC实现
USB复合设备与组合设备区别
其实多个接口组合在一起有2种情况
第一种叫做USB复合设备（Compound Device）：
就是此类设备内部会集成一个HUD，然后多个USB连接到此HUD上，然后每个USB都会有自己独立的PID、VID
第二种叫做USB组合设备（Composite Device）：
此类设备则内部只有一个PID、VID，通过定义多个接口描述符来实现多个功能的组合
参考原文链接
效果展示
修改相关配置
修改配置项
usbd_conf.h
#define USBD_MAX_NUM_INTERFACES 6U
修改设备描述符
usbd_desc.c
__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
0x12, /*bLength */
USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
0x00, /*bcdUSB */
0x02,
0xEF, /*bDeviceClass*/
0x02, /*bDeviceSubClass*/
0x01, /*bDeviceProtocol*/
// 0x02, /*bDeviceClass*/
// 0x02, /*bDeviceSubClass*/
// 0x00, /*bDeviceProtocol*/
USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
LOBYTE(USBD_VID), /*idVendor*/
HIBYTE(USBD_VID), /*idVendor*/
LOBYTE(USBD_PID_FS), /*idProduct*/
HIBYTE(USBD_PID_FS), /*idProduct*/
0x00, /*bcdDevice rel. 2.00*/
0x02,
USBD_IDX_MFC_STR, /*Index of manufacturer string*/
USBD_IDX_PRODUCT_STR, /*Index of product string*/
USBD_IDX_SERIAL_STR, /*Index of serial number string*/
USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
;
修改配置、接口、端点描述符
usbd_cdc.h
头文件增加了：多路串口的宏定义
修改了：发送接收接口函数声明
/**
******************************************************************************
* @file usbd_cdc.h
* @author MCD Application Team
* @brief header file for the usbd_cdc.c file.
******************************************************************************
* @attention
*
* Copyright (c) 2015 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_CDC_H
#define __USB_CDC_H
#ifdef __cplusplus
extern "C"
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_ioreq.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @
*/
/** @defgroup usbd_cdc
* @brief This file is the Header file for usbd_cdc.c
* @
*/
/** @defgroup usbd_cdc_Exported_Defines
* @
*/
#ifndef CDC_IN_EP
#define CDC_IN_EP 0x81U /* EP1 for data IN */
#endif /* CDC_IN_EP */
#ifndef CDC_OUT_EP
#define CDC_OUT_EP 0x01U /* EP1 for data OUT */
#endif /* CDC_OUT_EP */
#ifndef CDC_CMD_EP
#define CDC_CMD_EP 0x84U /* EP4 for CDC commands */
#endif /* CDC_CMD_EP */
/* 2 路 USB CDC */
#define USE_CDC_IAD 1 /**< 使用多路CDC使能 */
#define USE_CDC_NUM 3 /**< 使用2路 or 3路 */
#ifndef CDC_IN_EP2
#define CDC_IN_EP2 0x82U /* EP2 for data IN */
#endif /* CDC_IN_EP */
#ifndef CDC_OUT_EP2
#define CDC_OUT_EP2 0x02U /* EP2 for data OUT */
#endif /* CDC_OUT_EP */
#ifndef CDC_CMD_EP5
#define CDC_CMD_EP5 0x85U /* EP5 for CDC commands */
#endif /* CDC_CMD_EP */
#ifndef CDC_IN_EP3
#define CDC_IN_EP3 0x83U /* EP3 for data IN */
#endif /* CDC_IN_EP */
#ifndef CDC_OUT_EP3
#define CDC_OUT_EP3 0x03U /* EP3 for data OUT */
#endif /* CDC_OUT_EP */
#ifndef CDC_CMD_EP6
#define CDC_CMD_EP6 0x86U /* EP6 for CDC commands */
#endif /* CDC_CMD_EP */
#ifndef CDC_HS_BINTERVAL
#define CDC_HS_BINTERVAL 0x10U
#endif /* CDC_HS_BINTERVAL */
#ifndef CDC_FS_BINTERVAL
#define CDC_FS_BINTERVAL 0x10U
#endif /* CDC_FS_BINTERVAL */
/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
#define CDC_DATA_HS_MAX_PACKET_SIZE 512U /* Endpoint IN & OUT Packet size */
#define CDC_DATA_FS_MAX_PACKET_SIZE 64U /* Endpoint IN & OUT Packet size */
#define CDC_CMD_PACKET_SIZE 8U /* Control Endpoint Packet size */
#if USE_CDC_IAD && USE_CDC_NUM == 2
#define USB_CDC_CONFIG_DESC_SIZ ((67U - 9U + 8U) * 2U + 9U)
#elif USE_CDC_IAD && USE_CDC_NUM == 3
#define USB_CDC_CONFIG_DESC_SIZ ((67U - 9U + 8U) * 3U + 9U)
#else
#define USB_CDC_CONFIG_DESC_SIZ 67U
#endif
#define CDC_DATA_HS_IN_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
#define CDC_DATA_HS_OUT_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
#define CDC_DATA_FS_IN_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
#define CDC_DATA_FS_OUT_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
#define CDC_REQ_MAX_DATA_SIZE 0x7U
/*---------------------------------------------------------------------*/
/* CDC definitions */
/*---------------------------------------------------------------------*/
#define CDC_SEND_ENCAPSULATED_COMMAND 0x00U
#define CDC_GET_ENCAPSULATED_RESPONSE 0x01U
#define CDC_SET_COMM_FEATURE 0x02U
#define CDC_GET_COMM_FEATURE 0x03U
#define CDC_CLEAR_COMM_FEATURE 0x04U
#define CDC_SET_LINE_CODING 0x20U
#define CDC_GET_LINE_CODING 0x21U
#define CDC_SET_CONTROL_LINE_STATE 0x22U
#define CDC_SEND_BREAK 0x23U
/**
* @
*/
/** @defgroup USBD_CORE_Exported_TypesDefinitions
* @
*/
/**
* @
*/
typedef struct
uint32_t bitrate;
uint8_t format;
uint8_t paritytype;
uint8_t datatype;
USBD_CDC_LineCodingTypeDef;
typedef struct _USBD_CDC_Itf
int8_t (* Init)(void);
int8_t (* DeInit)(void);
int8_t (* Control)(uint8_t cmd, uint8_t *pbuf, uint16_t length);
int8_t (* Receive)(uint8_t *Buf, uint32_t *Len, uint8_t epnum);
int8_t (* TransmitCplt)(uint8_t *Buf, uint32_t *Len, uint8_t epnum);
USBD_CDC_ItfTypeDef;
typedef struct
uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE / 4U]; /* Force 32-bit alignment */
uint8_t CmdOpCode;
uint8_t CmdLength;
uint8_t *RxBuffer;
uint8_t *TxBuffer;
uint32_t RxLength;
uint32_t TxLength;
__IO uint32_t TxState;
__IO uint32_t RxState;
USBD_CDC_HandleTypeDef;
/** @defgroup USBD_CORE_Exported_Macros
* @
*/
/**
* @
*/
/** @defgroup USBD_CORE_Exported_Variables
* @
*/
extern USBD_ClassTypeDef USBD_CDC;
#define USBD_CDC_CLASS &USBD_CDC
/**
* @
*/
/** @defgroup USB_CORE_Exported_Functions
* @
*/
uint8_t USBD_CDC_RegisterInterface(USBD_HandleTypeDef *pdev,
USBD_CDC_ItfTypeDef *fops);
uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev, uint8_t *pbuff,
uint32_t length);
uint8_t USBD_CDC_SetRxBuffer(USBD_HandleTypeDef *pdev, uint8_t *pbuff);
uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev, uint8_t epnum);
uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev, uint8_t epnum);
/**
* @
*/
#ifdef __cplusplus
#endif
#endif /* __USB_CDC_H */
/**
* @
*/
/**
* @
*/
usbd_cdc.c
1、修改了描述符，8个字节IAD描述符 * 3、2路接口配置
2、修改了初始化函数，反初始化函数接口
3、修改了数据流转接口增加了端点地址参数
/**
******************************************************************************
* @file usbd_cdc.c
* @author MCD Application Team
* @brief This file provides the high layer firmware functions to manage the
* following functionalities of the USB CDC Class:
* - Initialization and Configuration of high and low layer
* - Enumeration as CDC Device (and enumeration for each implemented memory interface)
* - OUT/IN data transfer
* - Command IN transfer (class requests management)
* - Error management
*
******************************************************************************
* @attention
*
* Copyright (c) 2015 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
* @verbatim
*
* ===================================================================
* CDC Class Driver Description
* ===================================================================
* This driver manages the "Universal Serial Bus Class Definitions for Communications Devices
* Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus
* Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007"
* This driver implements the following aspects of the specification:
* - Device descriptor management
* - Configuration descriptor management
* - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN)
* - Requests management (as described in section 6.2 in specification)
* - Abstract Control Model compliant
* - Union Functional collection (using 1 IN endpoint for control)
* - Data interface class
*
* These aspects may be enriched or modified for a specific user application.
*
* This driver doesn't implement the following aspects of the specification
* (but it is possible to manage these features with some modifications on this driver):
* - Any class-specific aspect relative to communication classes should be managed by user application.
* - All communication classes other than PSTN are not managed
*
* @endverbatim
*
******************************************************************************
*/
/* BSPDependencies
- "stm32xxxxx_evaldiscoverynucleo_144.c"
- "stm32xxxxx_evaldiscovery_io.c"
EndBSPDependencies */
/* Includes ------------------------------------------------------------------*/
#include "usbd_cdc.h"
#include "usbd_ctlreq.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @
*/
/** @defgroup USBD_CDC
* @brief usbd core module
* @
*/
/** @defgroup USBD_CDC_Private_TypesDefinitions
* @
*/
/**
* @
*/
/** @defgroup USBD_CDC_Private_Defines
* @
*/
/**
* @
*/
/** @defgroup USBD_CDC_Private_Macros
* @
*/
/**
* @
*/
/** @defgroup USBD_CDC_Private_FunctionPrototypes
* @
*/
static uint8_t USBD_CDC_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
static uint8_t USBD_CDC_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
static uint8_t USBD_CDC_Setup(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
static uint8_t USBD_CDC_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum);
static uint8_t USBD_CDC_DataOut(USBD_HandleTypeDef *pdev, uint8_t epnum);
static uint8_t USBD_CDC_EP0_RxReady(USBD_HandleTypeDef *pdev);
#ifndef USE_USBD_COMPOSITE
static uint8_t *USBD_CDC_GetFSCfgDesc(uint16_t *length);
static uint8_t *USBD_CDC_GetHSCfgDesc(uint16_t *length);
static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length);
static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length);
uint8_t *USBD_CDC_GetDeviceQualifierDescriptor(uint16_t *length);
#endif /* USE_USBD_COMPOSITE */
#ifndef USE_USBD_COMPOSITE
/* USB Standard Device Descriptor */
__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
USB_LEN_DEV_QUALIFIER_DESC,
USB_DESC_TYPE_DEVICE_QUALIFIER,
0x00,
0x02,
0x00,
0x00,
0x00,
0x40,
0x01,
0x00,
;
#endif /* USE_USBD_COMPOSITE */
/**
* @
*/
/** @defgroup USBD_CDC_Private_Variables
* @
*/
/* CDC interface class callbacks structure */
USBD_ClassTypeDef USBD_CDC =
USBD_CDC_Init,
USBD_CDC_DeInit,
USBD_CDC_Setup,
NULL, /* EP0_TxSent */
USBD_CDC_EP0_RxReady,
USBD_CDC_DataIn,
USBD_CDC_DataOut,
NULL,
NULL,
NULL,
#ifdef USE_USBD_COMPOSITE
NULL,
NULL,
NULL,
NULL,
#else
USBD_CDC_GetHSCfgDesc,
USBD_CDC_GetFSCfgDesc,
USBD_CDC_GetOtherSpeedCfgDesc,
USBD_CDC_GetDeviceQualifierDescriptor,
#endif /* USE_USBD_COMPOSITE */
;
#ifndef USE_USBD_COMPOSITE
/* USB CDC device Configuration Descriptor */
__ALIGN_BEGIN static uint8_t USBD_CDC_CfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
/* Configuration Descriptor */
0x09, /* bLength: Configuration Descriptor size */
USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength */
0x00,
#if USE_CDC_IAD && USE_CDC_NUM == 2
0x02 * 2, /* bNumInterfaces: 2 interfaces */
#elif USE_CDC_IAD && USE_CDC_NUM == 3
0x02 * 3, /* bNumInterfaces: 2 interfaces */
#else
0x02, /* bNumInterfaces: 2 interfaces */
#endif
0x01, /* bConfigurationValue: Configuration value */
0x00, /* iConfiguration: Index of string descriptor
describing the configuration */
#if (USBD_SELF_POWERED == 1U)
0xC0, /* bmAttributes: Bus Powered according to user configuration */
#else
0x80, /* bmAttributes: Bus Powered according to user configuration */
#endif /* USBD_SELF_POWERED */
USBD_MAX_POWER, /* MaxPower (mA) */
/*---------------------------------------------------------------------------*/
#if USE_CDC_IAD && USE_CDC_NUM >= 2
/* Interface Association Descriptor IAD描述符 -- 控制接口 0 */
0x08, /* bLength IAD描述符大小 */
0x0B, /* bDescriptorType IAD描述符类型 */
0x00, /* bFirstInterface 该IAD所聚合的多个接口中，首个索引编号 */
0x02, /* bInferfaceCount 该功能包含接口的数目 */
0x02, /* bFunctionClass 建议使用该IAD所聚合的多个interface中的第一个interface的对应参数，设备符中的bDeviceClass */
0x02, /* bFunctionSubClass 建议使用该IAD所聚合的多个interface中的第一个interface的对应参数，设备符中的bDeviceSubClass */
0x01, /* bFunctionProtocol 建议使用该IAD所聚合的多个interface中的第一个interface的对应参数，设备符中的bDeviceProtocol */
0x00, /* iFunction 描述该功能的字符串编号 */
/* 08 byte*/
#endif
/* Interface Descriptor */
0x09, /* bLength: Interface Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
/* Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x01, /* bNumEndpoints: One endpoint used */
0x02, /* bInterfaceClass: Communication Interface Class */
0x02, /* bInterfaceSubClass: Abstract Control Model */
0x01, /* bInterfaceProtocol: Common AT commands */
0x00, /* iInterface */
/* Header Functional Descriptor */
0x05, /* bLength: Endpoint Descriptor size */
0x24, /* bDescriptorType: CS_INTERFACE */
0x00, /* bDescriptorSubtype: Header Func Desc */
0x10, /* bcdCDC: spec release number */
0x01,
/* Call Management Functional Descriptor */
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x01, /* bDescriptorSubtype: Call Management Func Desc */
0x00, /* bmCapabilities: D0+D1 */
0x01, /* bDataInterface */
/* ACM Functional Descriptor */
0x04, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x02, /* bDescriptorSubtype: Abstract Control Management desc */
0x02, /* bmCapabilities */
/* Union Functional Descriptor */
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x06, /* bDescriptorSubtype: Union func desc */
0x00, /* bMasterInterface: Communication class interface */
0x01, /* bSlaveInterface0: Data Class Interface */
/* Endpoint 2 Descriptor */
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_CMD_EP, /* bEndpointAddress */
0x03, /* bmAttributes: Interrupt */
LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize */
HIBYTE(CDC_CMD_PACKET_SIZE),
CDC_FS_BINTERVAL, /* bInterval */
/*---------------------------------------------------------------------------*/
/* Data class interface descriptor */
0x09, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
0x01, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints: Two endpoints used */
0x0A, /* bInterfaceClass: CDC */
0x00, /* bInterfaceSubClass */
0x00, /* bInterfaceProtocol */
0x00, /* iInterface */
/* Endpoint OUT Descriptor */
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_OUT_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize */
HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
0x00, /* bInterval */
/* Endpoint IN Descriptor */
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorTyp以上是关于USB Composite 组合设备之多路CDC实现的主要内容，如果未能解决你的问题，请参考以下文章