用 kubeadm 部署生产级 k8s 集群

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了用 kubeadm 部署生产级 k8s 集群相关的知识,希望对你有一定的参考价值。

概述

kubeadm?已?持集群部署,且在1.13?版本中?GA,?持多?master,多?etcd?集群化部署,它也是官?最为推荐的部署?式,?来是由它的?sig?组来推进的,?来?kubeadm?在很多??确实很好的利?了?kubernetes?的许多特性,接下来?篇我们来实践并了解下它的魅?。

?标

1. 通过 kubeadm 搭建?可? kubernetes 集群,并新建管理?户

2. 为后续做版本升级演示,此处使?1.13.1版本,到下?篇再升级到 v1.14

3. kubeadm 的原理解读

本?主要介绍 kubeadm 对?可?集群的部署

kubeadm 部署 k8s v1.13 ?可?集群

?式有两种

  • Stacked etcd topology

技术图片

  • 即每台 etcd 各?独?,分别部署在 3 台 master 上,互不通信,优点是简单,缺点是缺乏 etcd ?可?性

  • 需要?少 4 台机器(3master 和 etcd,1node)

  • External etcd topology

技术图片

  • 即采?集群外 etcd 拓扑结构,这样的冗余性更好,但需要?少7台机器(3master,3etcd,1node)

  • ?产环境建议采?该?案

  • 本?也采?这个拓扑

步骤

  • 环境准备

  • 安装组件:docker,kubelet,kubeadm(所有节点)

  • 使?上述组件部署 etcd ?可?集群

  • 部署 master

  • 加?node

  • ?络安装

  • 验证

  • 总结

机环境准备

  • 系统环境
#操作系统版本(?必须,仅为此处案例)
$cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)
#内核版本(?必须,仅为此处案例)
$uname -r
4.17.8-1.el7.elrepo.x86_64

#数据盘开启ftype(在每台节点上执?)
umount /data
mkfs.xfs -n ftype=1 -f /dev/vdb
#禁?swap
swapoff -a
sed -i "s#^/swapfile##/swapfile#g" /etc/fstab
mount -a

docker,kubelet,kubeadm 的安装(所有节点)

  • 安装运?时(docker)

    • k8s1.13 版本根据官?建议,暂不采?最新的 18.09,这?我们采?18.06,安装时需指定版本

    • 来源:kubeadm?now?properly?recognizes?Docker?18.09.0?and?newer,?but?still?treats?18.06?as?the?default?supported version.

    • 安装脚本如下(在每台节点上执?):
yum install -y yum-utils device-mapper-persistent-data lvm2
yum-config-manager         --add-repo         https://download.docker.com/linux/centos/docker-ce.repo

yum makecache fast

yum install -y --setopt=obsoletes=0       docker-ce-18.06.1.ce-3.el7

systemctl start docker
systemctl enable docker
  • 安装 kubeadm,kubelet,kubectl

    • 官?的 Google yum 源?法从国内服务器上直接下载,所以可先在其他渠道下载好,在上传到服务器上
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
    • 本地安装
# 禁?selinux
  • ?络修复,已知 centos7 会因 iptables 被绕过?将流量错误路由,因此需确保sysctl 配置中的 net.bridge.bridgenf-call-iptables 被设置为 1
cat <<EOF > /etc/sysctl.d/k8s.conf

使?上述组件部署 etcd ?可?集群

1. 在 etcd 节点上,将 etcd 服务设置为由 kubelet 启动管理

cat << EOF > /etc/systemd/system/kubelet.service.d/20-etcd-service-manager.conf

2.?给每台?etcd?主机?成?kubeadm?配置?件,确保每台主机运??个?etcd?实例:在?etcd1(即上述的?hosts0)上执?上述

命令,可以在 /tmp ?录下看到?个主机名的?录

# Update HOST0, HOST1, and HOST2 with the IPs or resolvable names of your hosts
export HOST0=10.10.184.226
export HOST1=10.10.213.222
export HOST2=10.10.239.108

# Create temp directories to store files that will end up on other hosts.
mkdir -p /tmp/${HOST0}/ /tmp/${HOST1}/ /tmp/${HOST2}/

ETCDHOSTS=(${HOST0} ${HOST1} ${HOST2})
NAMES=("infra0" "infra1" "infra2")

for i in "${!ETCDHOSTS[@]}"; do
HOST=${ETCDHOSTS[$i]}
NAME=${NAMES[$i]}
cat << EOF > /tmp/${HOST}/kubeadmcfg.yaml
apiVersion: "kubeadm.k8s.io/v1beta1"
kind: ClusterConfiguration
etcd:
      local:
            serverCertSANs:
            - "${HOST}"
            peerCertSANs:
            - "${HOST}"
            extraArgs:
                  initial-cluster:
${NAMES[0]}=https://${ETCDHOSTS[0]}:2380,${NAMES[1]}=https://${ETCDHOSTS[1]}:2380,${N
AMES[2]}=https://${ETCDHOSTS[2]}:2380
                  initial-cluster-state: new
                  name: ${NAME}
                  listen-peer-urls: https://${HOST}:2380
                  listen-client-urls: https://${HOST}:2379
                  advertise-client-urls: https://${HOST}:2379
                  initial-advertise-peer-urls: https://${HOST}:2380
EOF
done

3.?制作CA:在host0上执?命令?成证书,它将创建两个?件:/etc/kubernetes/pki/etcd/ca.crt/etc/kubernetes/pki/etcd/ca.key?(这?步需要×××)

[[email protected] ~]# kubeadm init phase certs etcd-ca
[certs] Generating "etcd/ca" certificate and key

4.?在?host0?上给每个?etcd?节点?成证书:

export HOST0=10.10.184.226
export HOST1=10.10.213.222
export HOST2=10.10.239.108
kubeadm init phase certs etcd-server --config=/tmp/${HOST2}/kubeadmcfg.yaml
kubeadm init phase certs etcd-peer --config=/tmp/${HOST2}/kubeadmcfg.yaml
kubeadm init phase certs etcd-healthcheck-client --
config=/tmp/${HOST2}/kubeadmcfg.yaml
kubeadm init phase certs apiserver-etcd-client --config=/tmp/${HOST2}/kubeadmcfg.yaml
cp -R /etc/kubernetes/pki /tmp/${HOST2}/
# cleanup non-reusable certificates
find /etc/kubernetes/pki -not -name ca.crt -not -name ca.key -type f -delete

kubeadm init phase certs etcd-server --config=/tmp/${HOST1}/kubeadmcfg.yaml
kubeadm init phase certs etcd-peer --config=/tmp/${HOST1}/kubeadmcfg.yaml
kubeadm init phase certs etcd-healthcheck-client --
config=/tmp/${HOST1}/kubeadmcfg.yaml
kubeadm init phase certs apiserver-etcd-client --config=/tmp/${HOST1}/kubeadmcfg.yaml
cp -R /etc/kubernetes/pki /tmp/${HOST1}/
find /etc/kubernetes/pki -not -name ca.crt -not -name ca.key -type f -delete

kubeadm init phase certs etcd-server --config=/tmp/${HOST0}/kubeadmcfg.yaml
kubeadm init phase certs etcd-peer --config=/tmp/${HOST0}/kubeadmcfg.yaml
kubeadm init phase certs etcd-healthcheck-client --
config=/tmp/${HOST0}/kubeadmcfg.yaml
kubeadm init phase certs apiserver-etcd-client --config=/tmp/${HOST0}/kubeadmcfg.yaml
# No need to move the certs because they are for HOST0

# clean up certs that should not be copied off this host
find /tmp/${HOST2} -name ca.key -type f -delete
find /tmp/${HOST1} -name ca.key -type f -delete
  • 将证书和 kubeadmcfg.yaml 下发到各个 etcd 节点上效果为
/root/
└── kubeadmcfg.yaml
---
/etc/kubernetes/pki
├── apiserver-etcd-client.crt
├── apiserver-etcd-client.key
└── etcd
        ├── ca.crt
        ├── ca.key
        ├── healthcheck-client.crt
        ├── healthcheck-client.key
        ├── peer.crt
        ├── peer.key
        ├── server.crt
        └── server.key

5.??成静态?pod?manifest?,在?3?台?etcd?节点上分别执?:(需×××)

$ kubeadm init phase etcd local --config=/root/kubeadmcfg.yaml
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"

6. 检查 etcd 集群状态,?此 etcd 集群搭建完成

docker run --rm -it --net host -v /etc/kubernetes:/etc/kubernetes
k8s.gcr.io/etcd:3.2.24 etcdctl --cert-file /etc/kubernetes/pki/etcd/peer.crt --keyfile /etc/kubernetes/pki/etcd/peer.key --ca-file /etc/kubernetes/pki/etcd/ca.crt --
endpoints https://${HOST0}:2379 cluster-health
member 9969ee7ea515cbd2 is healthy: got healthy result from
https://10.10.213.222:2379
member cad4b939d8dfb250 is healthy: got healthy result from
https://10.10.239.108:2379
member e6e86b3b5b495dfb is healthy: got healthy result from
https://10.10.184.226:2379
cluster is healthy

使? kubeadm 部署 master

  • 将任意?台 etcd 上的证书拷?到 master1 节点
export CONTROL_PLANE="[email protected]"
+scp /etc/kubernetes/pki/etcd/ca.crt "${CONTROL_PLANE}":
+scp /etc/kubernetes/pki/apiserver-etcd-client.crt "${CONTROL_PLANE}":
+scp /etc/kubernetes/pki/apiserver-etcd-client.key "${CONTROL_PLANE}":
  • 在第?台 master 上编写配置?件 kubeadm-config.yaml 并初始化
apiVersion: kubeadm.k8s.io/v1beta1
kind: ClusterConfiguration
kubernetesVersion: stable
#kubernetesVersion: 1.13.1
#注意这?我们想先安装1.13.1再后续升级1.13.4所以直接声明版本号
apiServer:
   certSANs:
   - "k8s.paas.test"
controlPlaneEndpoint: "k8s.paas.test:6443"
etcd:
       external:
              endpoints:
              - https://10.10.184.226:2379
              - https://10.10.213.222:2379
              - https://10.10.239.108:2379
              caFile: /etc/kubernetes/pki/etcd/ca.crt
              certFile: /etc/kubernetes/pki/apiserver-etcd-client.crt
              keyFile: /etc/kubernetes/pki/apiserver-etcd-client.key
networking:
    podSubnet: "10.244.0.0/16"

注意:这?的?k8s.paas.test:6443?是?个?LB,如果没有可?虚拟?IP?来做

  • 使?私有仓库(?定义镜像功能) kubeadm ?持通过修改配置?件中的参数来灵活定制集群初始化?作,如?imageRepository 可以设置镜像前缀,我们可以在将镜像传到??内部私服上之后,编辑 kubeadm-config.yaml 中的该参数之后再执? init

  • 在?master1?上执?:kubeadm?init?--config?kubeadm-config.yaml
Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

    mkdir -p $HOME/.kube
    sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
    https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of machines by running the following on each node
as root:

  kubeadm join k8s.paas.test:6443 --token f1oygc.3zlc31yjcut46prf --discoverytoken-ca-cert-hash xx

  [[email protected] ~]
  $kubectl get node
  NAME STATUS ROLES AGE VERSION
  k8s-m1 NotReady master 4m54s v1.13.1

安装另外2台 master

  • master1?上的?admin.conf?配置?件和?pki?相关证书拷?到另外?2?台?master?同样?录下如:
/etc/kubernetes/pki/ca.crt
/etc/kubernetes/pki/ca.key
/etc/kubernetes/pki/sa.key
/etc/kubernetes/pki/sa.pub
/etc/kubernetes/pki/front-proxy-ca.crt
/etc/kubernetes/pki/front-proxy-ca.key
/etc/kubernetes/pki/etcd/ca.crt
/etc/kubernetes/pki/etcd/ca.key (官??档中此处需要拷?,但实际不需要)
/etc/kubernetes/admin.conf

注:官??档少了两个?件/etc/kubernetes/pki/apiserver-etcd-client.crt/etc/kubernetes/pki/apiserver-etcdclient.key,不加?apiserver?会启动失败并报错:

Unable to create storage backend: config (&{ /registry []
/etc/kubernetes/pki/apiserver-etcd-client.key /etc/kubernetes/pki/apiserver-etcdclient.crt /etc/kubernetes/pki/etcd/ca.crt true 0xc000133c20 <nil> 5m0s 1m0s}),
err (open /etc/kubernetes/pki/apiserver-etcd-client.crt: no such file or
directory)
  • 在?2?和?3?master?中执?加?:
  kubeadm join k8s.paas.test:6443 --token f1oygc.3zlc31yjcut46prf --discovery-tokenca-cert-hash sha256:078b63e29378fb6dcbedd80dd830b83e37521f294b4e3416cd77e854041d912f
--experimental-control-plane

加? node 节点

[[email protected] ~]
$ kubeadm join k8s.paas.test:6443 --token f1oygc.3zlc31yjcut46prf --discovery-tokenca-cert-hash sha256:078b63e29378fb6dcbedd80dd830b83e37521f294b4e3416cd77e854041d912f
[preflight] Running pre-flight checks
[discovery] Trying to connect to API Server "k8s.paas.test:6443"
[discovery] Created cluster-info discovery client, requesting info from
"https://k8s.paas.test:6443"
[discovery] Requesting info from "https://k8s.paas.test:6443" again to validate TLS
against the pinned public key
[discovery] Cluster info signature and contents are valid and TLS certificate
validates against pinned roots, will use API Server "k8s.paas.test:6443"
[discovery] Successfully established connection with API Server "k8s.paas.test:6443"
[join] Reading configuration from the cluster...
[join] FYI: You can look at this config file with ‘kubectl -n kube-system get cm
kubeadm-config -oyaml‘
[kubelet] Downloading configuration for the kubelet from the "kubelet-config-1.13"
ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file
"/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Activating the kubelet service
[tlsbootstrap] Waiting for the kubelet to perform the TLS Bootstrap...
[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the
Node API object "k8s-n1" as an annotation

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run ‘kubectl get nodes‘ on the master to see this node join the cluster.

网络安装

kubectl apply -f
https://raw.githubusercontent.com/coreos/flannel/a70459be0084506e4ec919aa1c114638878d
b11b/Documentation/kube-flannel.yml
kubectl get pod --all-namespaces -o wide
NAMESPACE NAME READY STATUS RESTARTS AGE
IP NODE NOMINATED NODE READINESS GATES
kube-system coredns-86c58d9df4-dc4t2 1/1 Running 0 14m
172.17.0.3 k8s-m1 <none> <none>
kube-system coredns-86c58d9df4-jxv6v 1/1 Running 0 14m
172.17.0.2 k8s-m1 <none> <none>
kube-system kube-apiserver-k8s-m1 1/1 Running 0 13m
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-apiserver-k8s-m2 1/1 Running 0 5m
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-apiserver-k8s-m3 1/1 Running 0 4m58s
10.10.56.27 k8s-m3 <none> <none>
kube-system kube-controller-manager-k8s-m1 1/1 Running 0 13m
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-controller-manager-k8s-m2 1/1 Running 0 5m
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-controller-manager-k8s-m3 1/1 Running 0 4m58s
10.10.56.27 k8s-m3 <none> <none>
kube-system kube-flannel-ds-amd64-nvmtk 1/1 Running 0 44s
10.10.56.27 k8s-m3 <none> <none>
kube-system kube-flannel-ds-amd64-pct2g 1/1 Running 0 44s
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-flannel-ds-amd64-ptv9z 1/1 Running 0 44s
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-flannel-ds-amd64-zcv49 1/1 Running 0 44s
10.10.175.146 k8s-n1 <none> <none>
kube-system kube-proxy-9cmg2 1/1 Running 0 2m34s
10.10.175.146 k8s-n1 <none> <none>
kube-system kube-proxy-krlkf 1/1 Running 0 4m58s
10.10.56.27 k8s-m3 <none> <none>
kube-system kube-proxy-p9v66 1/1 Running 0 14m
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-proxy-wcgg6 1/1 Running 0 5m
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-scheduler-k8s-m1 1/1 Running 0 13m
10.10.119.128 k8s-m1 <none> <none>
kube-system kube-scheduler-k8s-m2 1/1 Running 0 5m
10.10.76.80 k8s-m2 <none> <none>
kube-system kube-scheduler-k8s-m3 1/1 Running 0 4m58s
10.10.56.27 k8s-m3 <none> <none>

安装完成

验证

  • ?先验证kube-apiserver,?kube-controller-manager,?kube-scheduler,?pod?network?是否正常:
$kubectl create deployment nginx --image=nginx:alpine
$kubectl get pods -l app=nginx -o wide
NAME READY STATUS RESTARTS AGE IP NODE
NOMINATED NODE READINESS GATES
nginx-54458cd494-r6hqm 1/1 Running 0 5m24s 10.244.4.2 k8s-n1
<none> <none>
  • kube-proxy 验证
$kubectl expose deployment nginx --port=80 --type=NodePort
service/nginx exposed

[[email protected] ~]
$kubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 122m
nginx NodePort 10.108.192.221 <none> 80:30992/TCP 4s
[[email protected] ~]
$kubectl get pods -l app=nginx -o wide
NAME READY STATUS RESTARTS AGE IP NODE
NOMINATED NODE READINESS GATES
nginx-54458cd494-r6hqm 1/1 Running 0 6m53s 10.244.4.2 k8s-n1
<none> <none>

$curl -I k8s-n1:30992
HTTP/1.1 200 OK
  • 验证 dns,pod ?络状态
kubectl run --generator=run-pod/v1 -it curl --image=radial/busyboxplus:curl
If you don‘t see a command prompt, try pressing enter.
[ [email protected]:/ ]$ nslookup nginx
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local

Name: nginx
Address 1: 10.108.192.221 nginx.default.svc.cluster.local
  • ?可?

关机 master1,在?个随机 pod 中访问 Nginx 关机 master1,在?个随机 pod 中访问 Nginx

while true;do curl -I nginx && sleep 1 ;done

总结

  • 关于版本

    • 内核版本 4.19 更加稳定此处不建议4.17(再新就是5了)

    • docker 最新稳定版是 1.17.12,此处是 1.18.06,虽 k8s 官?也确认兼容1.18.09 了但?产上还是建议 1.17.12
  • 关于?络,各家选择不同,flannel在中?公司较为普遍,但部署前要选好?络插件,在配置?件中提前设置好(官?博客?开始的kubeadm配置中没写,后?在?络设置中?要求必须加)

  • 出错处理

    • 想重置环境的话,kubeadm reset 是个很好的?具,但它并不会完全重置,在etcd 中的的部分数据(如?configmap?secure?等)是没有被清空的,所以如果有必要重置真个环境,记得在?reset?后将?etcd?也重置。

    • 重置 etcd 办法为清空 etcd 节点 /var/lib/etcd,重启 docker 服务)
  • ×××

    • 镜像:kubeadm 已?持?定义镜像前缀,kubeadm-config.yaml 中设置 imageRepository 即可

    • yum,可提前下载导?,也可以设置 http_proxy 来访问

    • init,签发证书和?init?时需要连接?google,也可以设置?http_proxy来访问。
  • 更多

    • 证书、升级问题将在下?篇继续介绍。

参考:

51Reboot Python 运维开发18天训练营1999特价倒计时4天

网络班|面授班同步,有想要咨询的WeChat:17812796384

以上是关于用 kubeadm 部署生产级 k8s 集群的主要内容,如果未能解决你的问题,请参考以下文章

Kubernetes(k8s)生产级实践指南 从部署到核心应用

k8s kubeadm部署高可用集群

生产部署高可用k8s集群-kubeadm

使用kubeadm搭建生产级别k8s集群

kubeadm ansible快速部署kubernetes生产级高可用集群

kubeadm搭建高可用K8s集群