2018沈阳网络赛不太敢自称官方的出题人题解

Posted 2021-01-05 asm-definer

A. Gudako and Ritsuka

链接

by Yuki & Asm.Def

期望难度：Hard-

考虑从后往前进行博弈动态规划，在这一过程中维护所有的先手必胜区间。区间不妨采用左开右闭，方便转移。

考虑一次转移，如果当前Servant的后一个位置属于对手，则当前Servant的必胜区间可以通过将后一个Servant的每个必败区间的左端点+1、右端点+x得到；如果后一个位置属于自己，则可以通过将后一个Servant的必胜区间做同样的操作得到。不妨分别对必胜区间左右端点维护一个偏移量，需要从对手进行转移时只需修改偏移量后交换左右端点的集合，然后再在左端点的集合里插入一个0即可。

需要注意的是，这样得到的必胜区间会有重叠，可能导致对下一个对手的必胜区间的统计出错。考虑到每次转移时所有的同类区间的长度的变化量都相同，可以分别用两个优先队列维护这两类区间，每次转移后暴力合并重叠的区间即可。

复杂度(O((A+B) log(A+B)))

//Asm.Def
#include <bits/stdc++.h>
using namespace std;
typedef long long LL;
const int maxn = 100005;
int A, B, M;
LL N, x;
bool p[maxn], beg_A;

void init()
{
    scanf("%lld%lld%d%d", &N, &x, &A, &B);
    assert(A+B <= 100000);
    assert(A+B >= N);
    assert(A >= 1 && B >= 1);
    M = A+B;
    for(int i = 1;i <= M;++i) p[i] = false;
    int a;
    beg_A = false;
    for(int i = 0;i < A;++i)
    {
        scanf("%d", &a);
        p[a] = 1;
        if(a == 1) beg_A = true;
    }
}

int a[maxn], len;

struct Seg
{
    int l, r;
    LL len;
};
bool operator < (const Seg &a, const Seg &b)
{
    return a.len > b.len;
}

void work()
{
    len = 0;
    int cnt = 0;
    for(int i = 1;i <= M;++i)
    {
        ++cnt;
        if(i == M || p[i+1] != p[i])
        {
            a[len++] = cnt;
            cnt = 0;
        }
    }
    bool ans = false;

    static LL loc[maxn];
    static int nxt[maxn], lst[maxn];
    static bool sel[maxn];
    priority_queue<Seg> Q[2];

    bool L = 0, R = 1;
    LL offs[2] = {0};

    loc[len] = 0;
    nxt[len] = lst[len] = len;//用链表记录当前区间端点

    sel[len] = false;
    for(int i = len-1;i >= 0;--i)
    {
        //区间整体右移
        offs[L] += a[i] * x;
        offs[R] += a[i];
        L ^= 1, R ^= 1;
        
        //插入新增的左端点
        loc[i] = -offs[L];
        nxt[i] = nxt[len];
        lst[nxt[i]] = i;
        lst[i] = len;
        nxt[len] = i;
        sel[i] = true;
        Q[L].push( (Seg){i, nxt[i], loc[nxt[i]]-loc[i]} );

        //合并区间
        LL t = offs[R] - offs[L];//R(k)+offs[R] < L(k+1)+offs[L]
        Seg tmp;
        while(!Q[R].empty() && ((tmp = Q[R].top()).len <= t || !sel[tmp.l] || !sel[tmp.r]) )
        {
            Q[R].pop();
            if(sel[tmp.l] && sel[tmp.r])//合并一对跨立的"(](]",
            {
                sel[tmp.l] = sel[tmp.r] = false;
                nxt[lst[tmp.l]] = nxt[tmp.r];
                lst[nxt[tmp.r]] = lst[tmp.l];
                Q[L].push( (Seg){lst[tmp.l], nxt[tmp.r], loc[nxt[tmp.r]]-loc[lst[tmp.l]]} );
            }
            //否则为已被合并的区间，无需处理
        }

    }

    int it = nxt[len];
    ans = false;
    while(it != len && loc[it]+offs[L] < N)
    {
        if(nxt[it] == N || loc[nxt[it]]+offs[R] >= N)
        {
            ans = true;
            break;
        }
        it = nxt[it];
        if(it != len) it = nxt[it];
        if(it == 0) break;
    }
    puts((ans ^ beg_A) ? "Ritsuka" : "Gudako");
}

int main()
{
    clock_t beg = clock();
    int T;
    scanf("%d", &T);
    while(T--)
    {
        init();
        work();
    }
    //printf("%.3f sec
", double(clock()-beg) / CLOCKS_PER_SEC);
    return 0;
}

B. Call of Accepted

链接

期望难度：Medium

表达式求值问题可以将中缀表达式转换为后缀表达式，其中转换步骤使用调度场算法 与后缀表达式的求值 均在维基百科中有详细的介绍。

根据d运算的描述，(x { m d} y)本质上是一个定义在整数集的幂集上的运算，即(对于任意 S_1, S_2 in mathbb{2^Z}且 min(S_1) geq 0 且 min(S_2)geq 1)，定义(S_1 { m d} S_2 = {xin mathbb{Z} mid exists ain S_1, exists bin S_2, aleq x leq ab}). 则对于任意一次有定义的({ m d})运算，都有$min(S_1 { m d} S_2) = min(S_1) $, (max(S_1 { m d} S_2)=max(S_1)cdot max(S_2)). 其中(min(S))和(max(S))分别表示集合(S)中的最小值和最大值。

再将其余三种运算扩展到(mathbb{2^Z})上，可得

(min(S_1 + S_2)=min(S_1)+min(S_2), max(S_1+S_2)=max(S_1)+max(S_2))

(min(S_1-S_2) = min(S_1)-max(S_2), max(S_1-S_2) = max(S_1) - min(S_2))

(min(S_1*S_2)=min{min(S_1)*min(S_2), min(S_1)*max(S_2), max(S_1) * min(S_2), max(S_1)*max(S_2)})

(max(S_1*S_2)=max{min(S_1)*min(S_2), min(S_1)*max(S_2), max(S_1) * min(S_2), max(S_1)*max(S_2)})

由于我们只关注最大和最小的结果，所以可以直接用二元组(<min(S), max(S)>)来表示一个子表达式的运算结果，按照上述扩展定义进行运算即可。

p.s.虽然从实际意义来看d运算不满足结合律，但如果只考虑二元组(<min(S), max(S)>)的话，有(<min(S_1 { m d} S_2 { m d} cdots { m d} S_n), max(S_1 { m d} S_2 { m d} cdots { m d} S_n)> = <min(S_1), max(S_1) max(S_2) cdots max(S_n)>)，是无需考虑({ m d})运算的结合顺序的。

#include <bits/stdc++.h>
using namespace std;

struct Interval
{
    int L, R;
    Interval(){}
    Interval(int a, int b) : L(a), R(b) {}
    void Print(){printf("[%d,%d]
", L, R);}
};
Interval operator + (const Interval &a, const Interval &b)
{
    return Interval(a.L + b.L, a.R + b.R);
}
Interval operator - (const Interval &a, const Interval &b)
{
    return Interval(a.L - b.R, a.R - b.L);
}
Interval operator * (const Interval &a, const Interval &b)
{
    int mn = min(min(a.L * b.L, a.L * b.R), min(a.R * b.L, a.R * b.R));
    int mx = max(max(a.L * b.L, a.L * b.R), max(a.R * b.L, a.R * b.R));
    return Interval(mn, mx);
}
Interval f(const Interval &a, const Interval &b)
{
    assert(a.L >= 0 && b.L >= 1);
    return Interval(a.L, a.R * b.R);
}
int RPNLen, RPNNumLen;
Interval RPNNum[105];
char s[105], RPN[105];

inline int precedence(char ope) {
    if (ope == ‘+‘) return 1;
    if (ope == ‘-‘) return 1;
    if (ope == ‘*‘) return 2;
    if (ope == ‘/‘) return 2;
    if (ope == ‘d‘) return 3;
    return 0;
}

void expressionToRPN() {
    int stackLen = 0, x = 0;
    char stack[105];
    RPNLen = 0;
    RPNNumLen = 0;
    for (int i = 0; s[i] != ‘‘; i++) {
        if (s[i] >= ‘0‘ && s[i] <= ‘9‘) {
            if (i == 0 || s[i-1] < ‘0‘ || s[i-1] > ‘9‘) {
                RPNLen++;
                RPN[RPNLen] = ‘N‘;
                x = s[i] - ‘0‘;
            } else {
                x = x * 10 - ‘0‘ + s[i];
            }
            if(s[i+1] < ‘0‘ || s[i+1] > ‘9‘)
                RPNNum[++RPNNumLen] = Interval(x, x);
        } else if (s[i] == ‘(‘) {
            stackLen++;
            stack[stackLen] = s[i];
        } else if (s[i] == ‘)‘) {
            while (stack[stackLen] != ‘(‘) {
                RPNLen++;
                RPN[RPNLen] = stack[stackLen];
                stackLen--;
            }
            stackLen--;
        } else {
            while (stackLen > 0 && precedence(s[i]) <= precedence(stack[stackLen])) {
                RPNLen++;
                RPN[RPNLen] = stack[stackLen];
                stackLen--;
            }
            stackLen++;
            stack[stackLen] = s[i];
        }
    }
    while (stackLen > 0) {
        RPNLen++;
        RPN[RPNLen] = stack[stackLen];
        stackLen--;
    }
}

Interval CalcRPN() {
    int RPNNumCnt = 0, stackLen = 0;
    Interval stack[105];
    for (int i = 1; i <= RPNLen; i++) {
        if (RPN[i] == ‘N‘) {
            RPNNumCnt++;
            stackLen++;
            stack[stackLen] = RPNNum[RPNNumCnt];
        } else {
            Interval b = stack[stackLen];
            stackLen--;
            Interval a = stack[stackLen];
            stackLen--;
            Interval result;
            //printf("%c
", RPN[i]);
            //a.Print(), b.Print();
            if(RPN[i] == ‘+‘) result = a + b;
            if(RPN[i] == ‘-‘) result = a - b;
            if(RPN[i] == ‘*‘) result = a * b;
            if(RPN[i] == ‘d‘) result = f(a, b);
            //result.Print();
            stackLen++;
            stack[stackLen] = result;
        }
    }
    return stack[stackLen];
}

int main() {
    while (scanf("%s", s) == 1) {
        expressionToRPN();
        Interval ans = CalcRPN();
        printf("%d %d
", ans.L, ans.R);
    }
    return 0;
}

附对拍用的std.py

# Haizs
import re
class Interval:
    def __init__(self, l, r):
        self.l = l
        self.r = r

    def __str__(self):
        return "%d %d" % (self.l, self.r)

    def __add__(self, b):
        return Interval(self.l + b.l, self.r + b.r)

    def __sub__(self, b):
        return Interval(self.l - b.r, self.r - b.l)

    def __mul__(self, b):
        mn = min(min(self.l*b.l, self.r*b.r), min(self.l*b.r, self.r*b.l))
        mx = max(max(self.l*b.l, self.r*b.r), max(self.l*b.r, self.r*b.l))
        return Interval(mn, mx)

    def __pow__(self, b):
        return Interval(self.l, self.r * b.r)

a = input()
while a:
    a = a.replace("d", "**")
    b = re.sub(r"(d+)", r"Interval(1,1)", a)
    # print(b)
    print(eval(b))
    try:
        a = input()
    except:
        break

by catsworld & Asm.Def

C. Convex Hull

链接

期望难度：Medium

Solution 1

不考虑外层循环的情况，那么答案显然是：
[ ans = sum_{i=1}^{sqrt{x}} mu(i) * frac{1}{6}(frac{x}{i^2}+1) * (frac{x}{i^2}) * (2(frac{x}{i^2}))+1) * i^4 ]
在加了外层循环的情况下，考虑计算(mu(i) * i^4)的系数
令(sum(i)=sum_{j=1}^i j^2)
对于每一个(mu(i) * i^4)，它在全部的答案中出现次数为(n-i^2+1)次，可以推出系数为(sum_{j=i^2}^n sum(frac{j}{i^2}))
令(Max=frac{n}{i^2})
考虑sum括号中的取值，可以发现，一定有(i*i个1，i*i个2...i*i个Max-1，(n-i*i+11-(Max-1)*i*i)个Max)
所以，最终的系数为
[ egin{aligned} &i*i*(sum_{j=1}^{Max-1}sum(j)) + (n-i*i+1-(Max-1)*i*i)*sum(Max)= &Max*Max*(Max+1)*(Max-1)/12+(n-i*i+1-(Max-1)*i*i)*sum(Max) end{aligned} ]
考虑到模数很大，计算过程中需要用类似于分治乘法的思路或int128。

By WYJ2015

Solution2

答案可转化为
[ sum_{i=1}^n gay(i) cdot (n+1-i) mod p ]

在(sumlimits_{i=1}^{n} gay(i) (n+1-i))中，(i^2 cdot (n+1-i))被计入答案当且仅当i不含有平方因子。不妨考虑对所有i的因子进行容斥，即
[ egin{aligned} Ans &= sum_{x=1}^{[sqrt{n}]} mu(x) sum_{k=1}^{[frac{n}{x^2}]} (k x^2)^2 * (n+1-k x^2) mod p&= sum_{x=1}^{[sqrt{n}]} mu(x) left( (n+1)x^4 sum_{k=1}^{[frac{n}{x^2}]} k^2 - x^6 sum_{k=1}^{[frac{n}{x^2}]} k^3 ight) mod p\end{aligned} ]

其中，平方和与立方和为
[ egin{aligned} sum_{i=1}^n i^2 &= frac{n(n+1)(2n+1)}{6}\sum_{i=1}^n i^3 &= left(frac{n(n+1)}{2} ight)^2 end{aligned} ]

直接枚举x后代入计算即可。

在计算(x imes y mod p)时，由于p的最大值为(10^{11})，可能会超过long long的表示范围，可以将x拆成((acdot 2^{20} + b))，将y拆成((ccdot 2^{20} + d))，将每次乘法的运算数范围限制在(2^{20})以内，可以直接用((((((a * c) << 20) + (a * d + b * c)) % mod) << 20) + b * d) % mod计算出结果。

时间复杂度(O(sqrt{N}))

by Asm.Def

#include <bits/stdc++.h>
using namespace std;
const int maxn = 100005;
typedef long long LL;

int mu[maxn], P[maxn], pcnt;
bool not_p[maxn];
LL N, mod;

const LL lb = (1LL << 20) - 1;

inline LL mult(LL x, LL y, LL mod)
{
    LL a = x >> 20, b = x & lb;
    LL c = y >> 20, d = y & lb;
    return ( ( ( ( ( (a * c) << 20) + (a * d + b * c) ) % mod) << 20) + b * d) % mod;
}

inline LL S2(LL N)
{
    return mult(mult(N, N+1, 6*mod), (2*N+1), 6*mod) / 6;
    //return (__int128(N) * (N+1) * (2*N+1) / 6) % mod;
}

inline LL S3(LL N)
{
    LL t = mult(N, N+1, mod<<1) >> 1;
    //LL t = (__int128(N) * (N+1) / 2) % mod;
    return mult(t, t, mod);
}

void init()
{
    mu[1] = 1;
    for(int i = 2;i < maxn;++i)
    {
        if(!not_p[i]) P[pcnt++] = i, mu[i] = -1;
        for(int j = 0;j < pcnt;++j)
        {
            if(i * P[j] >= maxn) break;
            not_p[i * P[j]] = true;
            if(i % P[j] == 0)
            {
                mu[i * P[j]] = 0;
                break;
            }
            mu[i * P[j]] = -mu[i];
        }
    }
}

void work()
{
    LL ans = 0;
    for(int i = 1;LL(i) * i <= N;++i) if(mu[i])
    {
        LL t = LL(i) * i, t2 = mult(t, t, mod);
        ans = (ans + mu[i] * mult( mult(t2,N+1,mod), S2(N/t), mod) ) % mod;
        ans = (ans - mu[i] * mult(mult(t2,t,mod), S3(N/t), mod)) % mod;
    }
    printf("%lld
", (ans + mod) % mod);
}

int main()
{
    init();

    while(~scanf("%lld%lld", &N, &mod))
    {
        work();
    }
    return 0;
}

D. Made In Heaven

链接

by XLC

期望难度：Easy

K短路模板题。由于数据均为随机生成，直接预处理出每个点到终点的最短路后A*搜索即可。

E. The Cake Is A Lie

链接

by Haizs

期望难度：Medium

二分答案，那么每次check相当于是给定一个半径的圆，然后问这个圆最多覆盖多少个点，我们可以枚举一个点，然后再枚举每个与他距离<=2r的点，就可以求出所有的相交弧，离散化之后，求出覆盖最多次的弧，就是答案了。复杂度(O(n^2log(n)cdot log(30000)))。

#include <bits/stdc++.h>
using namespace std;
const int maxn = 605;
const double eps = 1e-6;
int i, j, t, n, m, k, z, y, x;
double l, r, mid;
int R;
int cmp(double x)
{
    if (fabs(x) < eps) return 0;
    if (x > 0) return 1;
    return -1;
}
struct point
{
    double x, y;
    point() {}
    point(double _x, double _y)
        : x(_x), y(_y) {}
    void input()
    {
        scanf("%lf%lf", &x, &y);
    }
    friend point operator+(const point &a, const point &b)
    {
        return point(a.x + b.x, a.y + b.y);
    }
    friend point operator-(const point &a, const point &b)
    {
        return point(a.x - b.x, a.y - b.y);
    }
    double norm()
    {
        return sqrt(x * x + y * y);
    }
    double angl()
    {
        return atan2(y, x);
    }
} poi[maxn];
double dis[maxn][maxn], ang[maxn][maxn];
pair<double, int> pdi[maxn];
#define mp(a, b) make_pair(a, b)
bool check(double r)
{
    int i, j, t, ans = 1, k;
    double d;
    for (i = 1; i <= n; i++)
    {
        t = 0;
        for (j = 1; j <= n; j++)
            if (i != j)
            {
                if (cmp(dis[i][j] - 2.0 * r) > 0) continue;
                d = acos(dis[i][j] / (2.0 * r));
                pdi[++t] = mp(ang[i][j] - d, 1);
                pdi[++t] = mp(ang[i][j] + d, -1);
            }
        sort(pdi + 1, pdi + t + 1);
        k = 1;
        for (j = 1; j <= t; j++)
        {
            k += pdi[j].second;
            ans = max(ans, k);
        }
    }
    return ans >= m;
}
int main()
{
    // cout << time(NULL) << endl;
    // freopen("tcial.in", "r", stdin);
    // freopen("tcial.out", "w", stdout);
    int T, I;
    scanf("%d", &T);
    for (I = 1; I <= T; I++)
    {
        scanf("%d%d", &n, &m);
        for (i = 1; i <= n; i++) poi[i].input();
        scanf("%d", &R);
        if (m > n)
        {
            printf("The cake is a lie.
");
            continue;
        }
        for (i = 1; i <= n; i++)
            for (j = 1; j <= n; j++)
                dis[i][j] = (poi[j] - poi[i]).norm(), ang[i][j] = (poi[j] - poi[i]).angl();
        l = R;
        r = 30000;
        while (r - l > eps)
        {
            mid = (l + r) / 2;
            if (check(mid - R))
                r = mid;
            else
                l = mid;
        }
        printf("%.6f
", r);
    }
    // cout << time(NULL) << endl;
    return 0;
}

F. Fantastic Graph

https://nanti.jisuanke.com/t/31446](https://nanti.jisuanke.com/t/31446)

by Infi

期望难度：Easy

添加源点s,汇点t。
对于原图的边，定义流量为[0,1]，s对于N个点都连边，流量为[L,R],M个点对t都连边，流量为[L,R]。那么就变成了有源汇上下界可行流问题。根据相关方法建图即可。

G. Spare Tire

链接

by ZGH

期望难度：Easy+

观察递推方程，不难看出通项公式的形式：
[ a_n = k p^n + an^2 + bn + c ]
代入后解得(p=1, a=1, b=1, c=-k)
即(a_n = n^2 + n)

则答案为
[ egin{aligned} &sum_{i=1}^{n} [gcd(i, m)=1] (i^2 + i)=&sum_{d|m land d leq n} mu(d) cdot sum_{t=1}^{[frac{n}{d}]} ((td)^2 + td)=&sum_{d|m land d leq n} mu(d) cdot left( d^2 cdot sum_{t=1}^{[frac{n}{d}]} t^2 + dcdot sum_{t=1}^{[frac{n}{d}]} t ight) end{aligned} ]
对m分解质因数后dfs枚举所有满足条件且(mu(d))不为0的d，然后用求和公式计算后半部分的贡献。

H. Hamming Weight

链接

by Asm.Def

期望难度：Hard

将N表示为
[ N = sum_{i=0}^{n-1} A_i 2^i, A_i in {0,1} ]
由于位与运算每一位是独立的，不妨对每一位单独考虑它对答案的贡献：
[ Ans(N) = sum_{i=0}^{n-1}left[A_i cdot (1 +sum_{j=0}^{i-1}A_jcdot 2^j )+ 2^i cdot sum_{j=i+1}^{n-1} A_jcdot 2^{j-i-1} ight]^2 ]

如果直接用FFT计算每次平方，时间复杂度为(O(n^2 log n)) ，难以接受。

考虑在N的某个区间([L, R))上定义答案，并将答案写成多项式的形式，即
[ Ans_{[L,R)}(x)=sum_{i=L}^{R-1} left[A_i cdot (1 +sum_{j=L}^{i-1}A_jcdot x^{j-L} )+ x^{i-L} cdot sum_{j=i+1}^{R-1} A_jcdot x^{j-i-1} ight]^2 ]

其中有一项常数项，不方便合并，因此先将答案拆开：
[ egin{aligned} &Ans_{[L,R)}(x)=&sum_{i=L}^{R-1} left[A_i^2 + 2A_i(A_i cdot sum_{j=L}^{i-1}A_jcdot x^{j-L} + x^{i-L} cdot sum_{j=i+1}^{R-1} A_jcdot x^{j-i-1}) \+ (A_i cdot sum_{j=L}^{i-1}A_jcdot x^{j-L} + x^{i-L} cdot sum_{j=i+1}^{R-1} A_jcdot x^{j-i-1})^2 ight] end{aligned} ]
考虑到(A_i)的取值范围为0或1，即(A_i^2 = A_i)，可将答案转化为
[ egin{aligned} &Ans_{[L,R)}(x)=&sum_{i=L}^{R-1} A_i + 2 sum_{i=L}^{R-1} A_i cdot left( sum_{j=L}^{i-1}A_jcdot x^{j-L} + sum_{j=i+1}^{R-1} A_jcdot x^{j-L-1} ight) + sum_{i=L}^{R-1} left(A_isum_{j=L}^{i-1}A_jcdot x^{j-L} + sum_{j=i+1}^{R-1} A_jcdot x^{j-L-1} ight)^2 end{aligned} ]
令
[ egin{array}{ccl} &S(i)&=&sumlimits_{j=i}^{n-1} A_i&F_{[L,R)}(x)&=&sumlimits_{i=L}^{R-1}A_i x^i&Ans1_{[L,R)}(x)&=&sumlimits_{i=L}^{R-1} A_i cdot left( sumlimits_{j=L}^{i-1}A_jcdot x^{j-L} + sumlimits_{j=i+1}^{R-1} A_jcdot x^{j-L-1} ight)&Ans2_{[L,R)}(x)&= &sumlimits_{i=L}^{R-1} left(A_isumlimits_{j=L}^{i-1}A_jcdot x^{j-L} + sumlimits_{j=i+1}^{R-1} A_jcdot x^{j-L-1} ight)^2 end{array} ]

则(Ans_{[L,R)}(x) = S(L)-S(R) + 2Ans1_{[L,R)}(x) + Ans2_{[L,R)}(x))。

考虑如何合并两个相邻区间([L, mid))、([mid,R))的答案。
[ egin{aligned} Ans1_{[L,R)}(x)=&sum_{i=L}^{R-1} A_i cdot left( sum_{j=L}^{i-1}A_jcdot x^{j-L} + sum_{j=i+1}^{R-1} A_jcdot x^{j-L-1} ight)=&sum_{i=L}^{mid-1} A_i cdot left( sum_{j=L}^{i-1}A_jcdot x^{j-L} + sum_{j=i+1}^{mid-1} A_jcdot x^{j-L-1} + sum_{j=mid}^{R-1} A_j cdot x^{j-L-1} ight)\ &+ sum_{i=mid}^{R-1} A_i cdot left( sum_{j=mid}^{i-1}A_jcdot x^{j-L} + sum_{j=i+1}^{R-1} A_jcdot x^{j-L-1} + sum_{j=L}^{mid-1} x^{j-L} ight)=&Ans1_{[L,mid)}(x) + Ans1_{[mid,R)}(x)cdot x^{mid-L}\ &+ left(sum_{i=L}^{mid-1} A_i ight) cdot left( sum_{j=mid}^{R-1} A_j cdot x^{j-L-1} ight)cdot + left(sum_{i=mid}^{R-1} A_i ight) cdot left( sum_{j=L}^{mid-1} A_j cdot x^{j-L} ight)=&Ans1_{[L,mid)}(x) + Ans1_{[mid,R)}(x)cdot x^{mid-L} \&+sum_{j=mid}^{R-1}(S(L)-S(mid))cdot A_j x^{j-L-1}+sum_{j=L}^{mid-1}(S(mid)-S(R))cdot A_j x^{j-L} end{aligned} ]

[ egin{aligned} Ans2_{[L,R)}(x)=&sum_{i=L}^{R-1} left(A_isum_{j=L}^{i-1}A_jcdot x^{j-L} + sum_{j=i+1}^{R-1} A_jcdot x^{j-L-1} ight)^2=&sum_{i=L}^{mid-1} left(A_isum_{j=L}^{i-1}A_jcdot x^{j-L} + sum_{j=i+1}^{mid-1} A_jcdot x^{j-L-1} + sum_{j=mid}^{R-1}A_jcdot x^{j-L-1} ight)^2 \&+ sum_{i=mid}^{R-1} left(A_isum_{j=mid}^{i-1}A_jcdot x^{j-L} + sum_{j=i+1}^{R-1} A_jcdot x^{j-L-1} + A_isum_{j=L}^{mid-1} A_jcdot x^{j-L} ight)^2=&Ans2_{[L,mid)}(x) + Ans2_{[mid, R)}(x) cdot x^{2(mid-L)}&+2sum_{i=L}^{mid-1} left(A_isum_{j=L}^{i-1}A_jcdot x^{j-L} + sum_{j=i+1}^{mid-1}A_jcdot x^{j-L-1} ight)cdot F_{[mid,R)}(x) x^{mid-L-1} &+2sum_{i=mid}^{R-1} A_i left( sum_{j=mid}^{i-1}A_jcdot x^{j-mid} + sum_{j=i+1}^{R-1}A_jcdot x^{j-mid-1} ight) cdot x^{mid-L} cdot F_{[L,mid)}(x)&+F_{[mid,R)}(x)^2cdot (mid-L) cdot x^{2(mid-L-1)}+F_{[L,mid)}(x)^2cdot [S(mid) - S(R)] end{aligned} ]

化简到这里，就可以通过两次长度为((mid-L))和((R-mid))的FFT运算和若干次多项式加法、数乘和移位，由([L,mid))和([mid,R))在(O((R-L)log(R-L)))的时间内求出(Ans1_{[L,R)}(x), Ans2_{[L,R)}(x))。由于待求的相当于x=2时的点值，所以每次用FFT进行乘法后都可以对结果进行一次进位，从而确保在相乘的过程中系数不会溢出。

对(Ans_{[0,n)}(2)?)分治求解，总复杂度(O(nlog^2 n)?).

//Asm.Def
#include <bits/stdc++.h>
using namespace std;
const int maxn = 200005, mod = 998244353, g = 3, maxk = 1 << 19;
typedef long long LL;
typedef vector<int> Poly;
int A[maxn], N, Sum[maxn];

void Print(const Poly &ans)
{
    for(int i = ans.size()-1;i >= 0;--i) printf("%d ", ans[i]);
    puts("");
}

int powmod(int a, int n)
{
    int ans = 1;
    while(n)
    {
        if(n & 1) ans = (LL) ans * a % mod;
        a = (LL) a * a % mod;
        n >>= 1;
    }
    return ans;
}

void Carry(Poly &x)
{
    int C = 0, c;
    while(x.size() > 1)
    {
        if(x.back() == 0) x.pop_back();
        else break;
    }

    for(int i = 0;i < x.size() || C;++i)
    {
        if(i < x.size())
        {
            x[i] += C;
            C = x[i] >> 1;
            x[i] = x[i] & 1;
        }
        else
        {
            x.push_back(C & 1);
            C >>= 1;
        }
    }
}

//Poly operator * (const Poly &a, const Poly &b)
//{
//  Poly ans(a.size() + b.size() - 1);
//  for(int i = 0;i < (int) a.size();++i)
//      for(int j = 0;j < (int) b.size();++j)
//          ans[i+j] += a[i] * b[j];
//  Carry(ans);
//  return ans;
//}

void Shuff(int A[], int n)//n为位数
{
    static int B[maxk];
    int N = 1 << n, j, mx = 1 << (n-1);
    for(int i = 0, it = 0;i < N;++i)
    {
        B[i] = A[it];
        j = mx;
        while(it & j)
        {
            it ^= j;
            j >>= 1;
        }
        it ^= j;
    }
    for(int i = 0;i < N;++i) A[i] = B[i];
}

void DFT(Poly &A, int n, int a)//n为位数
{
    static int B[maxk], pw[20];
    int N = 1 << n;
    pw[n-1] = a;
    for(int i = n-1;i;--i) pw[i-1] = (LL) pw[i] * pw[i] % mod;
    A.resize(N);
    for(int i = 0;i < N;++i) B[i] = A[i];
    Shuff(B, n);
    for(int i = 0;i < n;++i)
    {
        int d = (1 << i), x0 = pw[i];
        for(int j = 0;j < N;j += (d<<1))
        {
            for(int k = j, x = 1;k < j+d;++k)
            {
                int t = (LL) x * B[k+d] % mod;
                B[k+d] = (B[k] + mod - t) % mod;
                B[k] = (B[k] + t) % mod;
                x = (LL) x * x0 % mod;
            }
        }
    }
    for(int i = 0;i < N;++i) A[i] = B[i];
    //Print(A);
}

Poly operator * (const Poly &x, const Poly &y)
{
    static Poly A, B;
    A = x, B = y;
    while(A.size() > 1)
    {
        if(A.back() == 0) A.pop_back();
        else break;
    }
    while(B.size() > 1)
    {
        if(B.back() == 0) B.pop_back();
        else break;
    }
    int n = 0;
    while((1<<n) < A.size() + B.size()) ++n;

    int a = powmod(g, (mod-1) >> n);
    DFT(A, n, a);
    DFT(B, n, a);

    for(int i = 0;i < (1 << n);++i) A[i] = (LL) A[i] * B[i] % mod;
    DFT(A, n, powmod(a, mod-2));
    int t = powmod((1 << n), mod-2);
    for(int i = 0;i < (1 << n);++i) A[i] = (LL) A[i] * t % mod;

    //Print(A);
    Carry(A);
    return A;
}

Poly operator * (const Poly &a, int x)
{
    Poly ans(a.size());
    for(int i = 0;i < (int) a.size();++i)
        ans[i] = a[i] * x;
    Carry(ans);
    return ans;
}

Poly operator + (const Poly &a, const Poly &b)
{
    Poly ans(max(a.size(), b.size()));
    for(int i = 0;i < (int) ans.size();++i)
    {
        ans[i] = 0;
        if(i < (int) a.size()) ans[i] += a[i];
        if(i < (int) b.size()) ans[i] += b[i];
    }
    return ans;
}

Poly operator << (const Poly &x, int n)
{
    Poly ans(x.size() + n, 0);
    for(int i = 0;i < x.size();++i) ans[n+i] = x[i];
    return ans;
}

//void Multi(const Poly &a, const Poly &b, Poly &ans)
//{
//  ans.resize(a.size() + b.size() - 1);
//  for(int i = 0;i < (int) a.size();++i)
//      for(int j = 0;j < (int) b.size();++j)
//          ans[i+j] += a[i] * b[j];
//}

void init()
{
    for(int i = 1;i <= N;++i) scanf("%1d", &A[N-i]);
    Sum[N] = 0;
    for(int i = N-1;i >= 0;--i)
        Sum[i] = Sum[i+1] + A[i];
}


void Solve(int L, int R, Poly &Ans1, Poly &Ans2)
{
    static Poly SL, SR, AL, AR;
    if(R - L == 1)
    {
        Ans1.resize(1);Ans1[0] = 0;
        Ans2.resize(1);Ans2[0] = 0;
        return;
    }
    int mid = (L + R) >> 1;
    Poly Ans1L, Ans1R, Ans2L, Ans2R;
    Solve(L, mid, Ans1L, Ans2L);
    Solve(mid, R, Ans1R, Ans2R);
    //printf("Solve (%d,%d)
", L, R);
    //
    //Print(Ans1L);
    //Print(Ans1R);
    //Print(Ans2L);
    //Print(Ans2R);
    //puts("");

    AL.clear();
    AL.resize(mid-L);
    for(int i = L;i < mid;++i) AL[i-L] = A[i];

    AR.clear();
    AR.resize(R-mid);
    for(int i = mid;i < R;++i) AR[i-mid] = A[i];

    SL.clear();
    SL.resize(mid-L);
    for(int i = L;i < mid-1;++i)
        SL[i-L] = A[i] * (Sum[i+1]-Sum[mid]) + A[i+1] * (i+1-L);

    SR.clear();
    SR.resize(R-mid);
    for(int i = mid;i < R-1;++i)
        SR[i-mid] = A[i] * (Sum[i+1]-Sum[R]) + A[i+1] * (Sum[mid]-Sum[i+1]);

    //puts("");
    //Print(AL);
    //Print(AR);
    //Print(SL);
    //Print(SR);
    
    Ans2 = Ans2L + ((AR * SL) << (mid-L)) + ((AR * AR * (mid - L)) << (2 * (mid-L-1))) + (Ans2R << (2 * (mid-L))) + ((AL * SR) << (mid-L+1)) + AL * AL * (Sum[mid]-Sum[R]);
    Carry(Ans2);

    Ans1 = Ans1L + (Ans1R << (mid-L));
    if((int) Ans1.size() < (R-L-1))
        Ans1.resize(R-L-1);
    for(int i = L;i < mid;++i)
        Ans1[i-L] += A[i] * (Sum[mid] - Sum[R]);
    for(int i = mid;i < R;++i)
        Ans1[i-L-1] += A[i] * (Sum[L] - Sum[mid]);
    Carry(Ans1);
    //Print(Ans1);
    //Print(Ans2);
}

void work()
{
    Poly ans1, ans2;
    Solve(0, N, ans1, ans2);
    //Print(ans1), Print(ans2);
    ans2 = ans2 + (ans1 << 1);
    ans2[0] += (Sum[0] - Sum[N]);
    Carry(ans2);
    int sum = 0;
    for(int i = ans2.size()-1;i >= 0;--i) printf("%d", ans2[i]);
    puts("");
    //for(int i = 0;i < (int) ans.size();++i)
    //  sum += ans[i];
    //printf("%d
", sum % 1000000007);
}

int main()
{
    time_t beg = clock();
    while(~scanf("%d", &N))
    {
        init();
        work();
    }
    //printf("%.2f sec", double(clock() - beg) / CLOCKS_PER_SEC);
    return 0;
}

I. Lattice‘s basics in digital electronics

链接

by Joker

期望难度：Easy

签到题。直接根据题意模拟即可，可以采用map来减少编码难度。

J. Ka Chang

链接

期望难度：Medium-

按每一层的结点个数分类讨论，设阈值为(T)。

当第(L)层的结点个数(Size_L <T)时，每次(1 L X)操作只需枚举这一层的所有结点，维护它们对每个结点的答案产生的贡献即可。

当第(L)层的结点个数(Size_L >= T)时，这样的层不超过(frac{N}{T})个，对于操作1可以直接对每个这样的层维护增加了多少point，对于每次询问直接枚举一遍即可。

对于第一种情况，可以用树状数组维护dfs序列上的区间和，时间复杂度(O(Q(Tcdot log N)));
对于第二种情况，时间复杂度(O(Qcdot frac{N}{T}))

则总时间复杂度为(O(Q cdot (T log N + frac{N}{T})))，取(T=sqrt{frac{N}{log N}}) 最优。

时间复杂度(O(Qcdotsqrt{Nlog N})) 。

by bird_14

K. Supreme Number

链接

by morejarphone

期望难度：Easy-

考虑到答案中任意一位都必须是1或质数，可知答案只可能由1、2、3、5、7构成。由于任意两个不为1的数字构成的两位数一定可以被11整除，所以答案中除1外的数字只能出现一次；1最多出现2次，因为111可以被3整除；而2、5、7三者一定不会有两者同时出现。因此满足条件的整数不会超过四位，全部预处理出来即可。