基础过滤工具

Posted 2020-12-24 liujunjun

 

 

 在所有的路由器上运行OSPF协议，通告相应网段到0区域，

配置

AR3
ospf 1 router-id 3.3.3.3 
 area 0.0.0.0 
  network 3.3.3.3 0.0.0.0 
  network 10.1.23.0 0.0.0.255 
#
AR2配置
ospf 1 router-id 2.2.2.2 
 area 0.0.0.0 
  network 2.2.2.0 0.0.0.255 
  network 10.1.12.0 0.0.0.255 
  network 10.1.23.0 0.0.0.255 
  network 10.1.24.0 0.0.0.255 

AR1配置
ospf 1 router-id 1.1.1.1 
 area 0.0.0.0 
  network 1.1.1.1 0.0.0.0 
  network 10.1.12.0 0.0.0.255 

AR4配置
ospf 1 router-id 4.4.4.4 
 area 0.0.0.0 
  network 4.4.4.4 0.0.0.0 
  network 10.1.24.0 0.0.0.255 

在路由器AR4上配置telnet相关配置，配置密码为huawei

[AR1]user-interface vty 0 4

[AR1-ui-vty0-4]authentication-mode password 
Please configure the login password (maximum length 16):huawei

<AR3>telnet 1.1.1.1
  Press CTRL_] to quit telnet mode
  Trying 1.1.1.1 ...
  Connected to 1.1.1.1 ...

Login authentication


Password:

这时发现只要路由可达的设备，并拥有密码，都可以访问R4路由器

AR1上创建ACL 200只允许2.2.2.2访问AR1，其余都禁止

acl number 2000  
 rule 5 permit source 2.2.2.2 0 
 rule 10 deny 

user-interface vty 0 4
 acl 2000 inbound
引用ACL 2000

此时就只有R2可以登录R1，其他路由器均无法登录R1

[AR1]dis acl 2000
Basic ACL 2000, 2 rules
Acl‘s step is 5
 rule 5 permit source 2.2.2.2 0 (1 matches)
 rule 10 deny (15 matches)

增加R3，让R3也可以登录R1

[AR1-acl-basic-2000]dis th
[V200R003C00]
#
acl number 2000  
 rule 5 permit source 2.2.2.2 0 
 rule 6 permit source 3.3.3.3 0 
 rule 10 deny 

<AR3>telnet -a 3.3.3.3 1.1.1.1
  Press CTRL_] to quit telnet mode
  Trying 1.1.1.1 ...
  Connected to 1.1.1.1 ...

Login authentication


Password:

高级ACL

[AR1]dis acl 3000
Advanced ACL 3000, 1 rule
Acl‘s step is 5
 rule 5 permit tcp source 2.2.2.2 0 destination 1.1.1.1 0 (1 matches)

user-interface vty 0 4
 acl 3000 inbound

配置前缀列表

[AR1-ospf-1]dis acl 2000
Basic ACL 2000, 2 rules
Acl‘s step is 5
 rule 5 deny source 10.1.23.0 0.0.0.255 (1 matches)
 rule 10 permit (8 matches)

spf 1 router-id 1.1.1.1 
 filter-policy 2000 import