LVS+Keepalived+Nginx+Tomcat高可用集群搭建(转)

Posted 2021-02-05 lyz108

tags:

篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了LVS+Keepalived+Nginx+Tomcat高可用集群搭建(转)相关的知识，希望对你有一定的参考价值。

LVS+Keepalived+nginx+Tomcat高可用集群搭建

最近公司重整架构,十几台服务器而且还要尽可能节约成本。我就谷歌了一下在几种集群之前进行比较最终采用了Keepalived+Nginx做负债均衡高可用。虽然之前也研究过集群,看过很多集群方面的原理和架构,但毕竟没有真正操作过以下案例是在虚拟机中完成实验其实对于高可用搭建来说只用给出Keepalived和Nginx的配置即可后面的一些安装搭建完全是本人项目需要可以不用理睬仅供参考。

本文只是实验搭建记录方便以后在服务器中实施搭建。

架构图如下

前提介绍本案例采用Centos7+Keepalived1.3.5+Tomcat9+Mysql5.6+Redis3.2.8+Rabbitmq3.6.10

一、集群搭建DR模式

前端LVS采用主从模式，Nginx为后端realserver负债均衡。

服务器环境如下

nginx+LVS_master	192.168.23.14
nginx+LVS_backup	192.168.23.15
VIP	192.168.23.20
Tomcat	192.168.23.16 ；192.168.23.17 ；192.168.23.18
redis	192.168.23.21
mysql	192.168.23.22

1、安装前调试以及优化

安装centos7选择默认最小化

停止firewalld运行

systemctl stop firewalld.service
systemctl disable firewalld.service

内核优化vi/etc/sysctl.conf

##关闭ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
##路由转发n
et.ipv4.ip_forward = 1
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0

防火墙安装iptables

yum -y install iptables-services iptables

修改selinux

vi/etc/selinux/config 修改selinux为disabled

重启

reboot

2、安装master和backup

安装前准备

yum -y install openssl openssl-devel popt popt-devel gcc* wget vim ipvsadm pcre pcre-devel

运行ipvsadm

查看内核模块是否存在

lsmod|grep ip_vs

makdir /data

下载安装

wget 
tar zxfkeepalived-1.3.5.tar.gz -C /data
 ./configure 
 --prefix=/usr/local/keepalived-1.3.5 
 make && make install

复制keepalived文件和脚本

cp/usr/local/keepalived-1.3.5/sbin/keepalived /usr/sbin/
cp/usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
cp/usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/ 
cp/data/keepalived-1.3.5/./keepalived/etc/init.d/keepalived /etc/init.d/
chmod 755/etc/init.d/keepalived
mkdir/etc/keepalived/

配置lvs网卡设置下的vip

#!/bin/bash
# description: Config realserver lo and apply noarp
# chkconfig: 345 80 20
SNS_VIP0=192.168.23.20
. /etc/rc.d/init.d/functions
case "$1" in
start)
       /sbin/ifconfig ens37 down
       /sbin/ifconfig ens37 up
       echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
       ifconfig ens37:0 $SNS_VIP0 netmask 255.255.255.255 broadcast $SNS_VIP0 up
       /sbin/route add -host $SNS_VIP0 dev ens37:0
       echo "RealServer Start OK"
       ;;
stop)
       ifconfig ens37:0 down
       route del $SNS_VIP0 >/dev/null 2>&1
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
       echo "RealServer Stoped"
       ;;
*)
       echo "Usage: $0 {start|stop}"
       exit 1
esac
exit 0

重启网卡

systemctl restart network.service

设置开启启动

chkconfig --add keepalived
chkconfig --level 345 keepalived on

设置master　/etc/keepalived/文件

! Configuration File for keepalived

global_defs {    #lvs组设置
   router_id LVS1    #id_唯一标识
}
vrrp_instance VI_1 {    #vrrp设置，VI_1自定义名称
    state MASTER    #master设置，必须大写
    interface ens33    #网卡设置，绑定vip的子接口，lvs需要绑定在网卡上，realserver绑定在回环口。区别：lvs对访问为外，realserver为内不易暴露本机信息。
    virtual_router_id 51    #router_id，vrrp唯一标识，一致
    priority 100    #优先级，越大越优先
    advert_int 1    #组播信息发送间隔，两个节点设置必须一样
    authentication {    #设置验证信息，两个节点必须一致
        auth_type PASS
        auth_pass lmnginx
    }
    virtual_ipaddress {    #设置vip
        192.168.23.20
    }
}
virtual_server 192.168.23.20 80 {    #设置vip连接下的realserver
    delay_loop 1    #每1秒检测回环口
    lb_algo rr    #设置调度算法为默认rr轮询
    lb_kind DR    #设置lvs默认为DR直接路由模式。建议lvs都是内网ip部署，最后vip用路由器映射到外网，最为安全！
    protocol TCP    #启用TCP检测模式
    real_server 192.168.23.14 80 {    #realserver的ip地址
    weight 1    #权重，最大越高，lvs就越优先访问。
    TCP_CHECK {    #TCP模式检测后端连接
       connect_timeout 3    #超时3秒
     　 retry 2    #重连次数2次
      　delay_before_retry 3    #重连间隔时间3秒
    　  connect_port 80    #检测后端realserver的端口
}
        }
    real_server 192.168.23.15 80 {
        weight 1
        TCP_CHECK {
            connect_timeout 3
            retry 3
            delay_before_retry 3
            connect_port 80
          }
     }
}

设置backup　/etc/keepalived/文件

! Configuration File for keepalived

global_defs {
   router_id LVS2
}
vrrp_instance VI_1 {
    state BACKUP
    interface ens33    
    virtual_router_id 51
    priority 80
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass lmnginx    #与backup的认证密码
    }
    virtual_ipaddress {
        192.168.23.20
    }
}
virtual_server 192.168.23.20 80 {
    delay_loop 1
    lb_algo rr
    lb_kind DR
    protocol TCP
    real_server 192.168.23.14 80 {
    weight 1
    TCP_CHECK {
  　　 connect_timeout 3
     　 retry 2
      　delay_before_retry 3
     　 connect_port 80
}
        }
    real_server 192.168.23.15 80 {
        weight 1
        TCP_CHECK {
       　   connect_timeout 3
            retry 3
            delay_before_retry 3
            connect_port 80
          }
     }
}

nginx监控脚本

#!/bin/bash
ip=`ifconfig ens33 |grep "inet" |awk -F " " ‘{print $2}‘`
nginx=`ps -C nginx --no-header |wc -l`
date=`date +%F-%r`
while true
do
if [ $nginx -eq 0 ]; then
        killall keepalived
        echo "$date $ip nginx宕机" |/bin/mail -s "$ip" [email protected] >/dev/null 2>&1
fi
sleep 1h
done

sleep 1h 设置每小时发送一次while ture执行正确为止后退出使用后台运行

nohup ./nginx >/dev/null 2>&1 &

附mail设置
安装mail

yum -y install mailx

设置mail文件

vim /etc/mail.rc
set from=***@163.com你的邮箱名建议和账号一致 smtp=smtp.163.com 邮箱的stmp服务器
set smtp-auth-user=***@163.com你的邮箱账号 smtp-auth-password=password你的邮箱密码这个密码是stmp认证用户的密码不懂可以百度 smtp-auth=login 确定登陆

3、nginx编译安装

安装依赖包

yum install -y vim wget lsof gcc gcc-c++ bzip2 net-tools bind-utilszlib-devel openssl-devel libxml2-devel libxslt-devel perl-devel perl-ExtUtils-Embed

创建nginx用户

groupadd nginx
useradd -s /sbin/nologin -g nginx -M nginx

安装Pcre
下载 wget http://www.pcre.org/pcre-8.41.tar.gz

cd /data
tar zxf pcre.tar.gz
./configure --prefix=/usr/local/pcre &&make && make install

安装openssl
下载安装

wget https://www.openssl.org/source/openssl-1.1.0f.tar.gz
cd /data
tar zxf openssl.tar.gz
./config --prefix=/usr/local/openssl &&make && make install

安装zlib
下载安装

wget www.zlib.net/zlib-1.2.11.tar.gz
cd /data
tar zxf zlib.tar.gz
./configure --prefix=/usr/local/zlib &&make && make install

mkdir -p /var/tmp/nginx/{client,proxy,fastcgi,uwsgi,scgi}
mkdir /var/log/nginx
mkdir /etc/nginx

安装nginx
下载安装

wget  
./configure 
--prefix=/usr/local/nginx--sbin-path=/usr/sbin/nginx
--conf-path=/etc/nginx/nginx.conf 
--error-log-path=/var/log/nginx/error.log 
--http-log-path=/var/log/nginx/access.log 
--lock-path=/var/lock/nginx.lock--user=nginx 
--group=nginx 
--with-http_ssl_module 
--with-http_dav_module 
--with-http_flv_module 
--with-http_realip_module 
--with-http_addition_module 
--with-http_xslt_module 
--with-http_stub_status_module 
--with-http_sub_module 
--with-http_random_index_module 
--with-http_degradation_module 
--with-http_secure_link_module 
--with-http_gzip_static_module 
--with-http_perl_module 
--with-http_v2_module 
--with-threads 
--with-stream--with-stream_ssl_module 
--with-pcre=/data/pcre=8.41.n"sp;
--with-zlib=/data/zlib-1.2.11 
--with-openssl=/data/openssl-1.1.0f 
--with-file-aio --with-mail 
--with-mail_ssl_module 
--http-client-body-temp-path=/var/tmp/nginx/client_body 
--http-proxy-temp-path=/var/tmp/nginx/proxy 
--http-fastcgi-temp-path=/var/tmp/nginx/fastcgi 
--http-uwsgi-temp-path=/var/tmp/nginx/uwsgi 
--http-scgi-temp-path=/var/tmp/nginx/scgi 
--with-ld-opt="-Wl,-E"
make && make install

配置realserver回环口下的的vip

#!/bin/bash
# description: Config realserver lo and apply noarp
# chkconfig: 345 80 20
SNS_VIP0=192.168.23.20
. /etc/rc.d/init.d/functions
case "$1" in
start)
       /sbin/ifconfig lo down
       /sbin/ifconfig lo up
       echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
       ifconfig lo:0 $SNS_VIP0 netmask 255.255.255.255 broadcast $SNS_VIP0 up
       /sbin/route add -host $SNS_VIP0 dev lo:0
       echo "RealServer Start OK"
       ;;
stop)
       ifconfig lo:0 down
       route del $SNS_VIP0 >/dev/null 2>&1
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
       echo "RealServer Stoped"
       ;;
*)
       echo "Usage: $0 {start|stop}"
       exit 1
esac
exit 0

配置nginx
实现静动分离和负债均衡

user  nginx;
worker_processes  auto;
events {
    worker_connections  65535;
    #使用epoll模块增强性能
    use epoll;
    #打开文件描述符（缓存有用）
    multi_accept on;
}
http {
    #隐藏nginx版本号
    server_tokens off;
    #指定nginx配置的软链接
    include       mime.types;
    include     conf.d/*;
    #默认文件类型
    default_type  text/html;
    #日志格式默认
    log_format  main  ‘$remote_addr - $remote_user [$time_local] "$request" ‘
                      ‘$status $body_bytes_sent "$http_referer" ‘
                      ‘"$http_user_agent" "$http_x_forwarded_for" "$request_time"‘;
    #开启高效的文件传输模式
    sendfile        on;
    #连接超时后重置连接，减少等待
    reset_timedout_connection off;
    #限制连接，zone自定义
    limit_conn_zone $binary_remote_addr zone=addr:5m;
    #限制连接数每个用户最大打开100次
    limit_conn addr 100;
    #默认一个一个发，这里为发送所以头部文件
    tcp_nopush     on;
    #不缓存数据
    tcp_nodelay on;
    #字符集
    charset UTF-8;
    #连接超时（秒）
    keepalive_timeout  65;
    #开启压缩
    gzip  on;
    gzip_proxied any;
    gzip_min_length 1000;
    gzip_comp_level 4;
    gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript;
    #设置访问头部
    proxy_redirect off;
    proxy_set_header Host $host;
    proxy_set_header X-Real-IP $remote_addr;
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
    #设置缓存
    client_max_body_size 10m;
    client_body_buffer_size 128k;
    proxy_connect_timeout 75; 
    proxy_read_timeout 300;  
    proxy_send_timeout 300;  
    proxy_buffer_size 16k;  
    proxy_buffers 4 64k;  
    proxy_busy_buffers_size 128k;  
    proxy_temp_file_write_size 128k;  
    proxy_temp_path /data/temp_path;
    proxy_cache_path /data/cache_path levels=1:2 keys_zone=cache_one:200m inactive=5d max_size=30g;
    #设置负债均衡
    upstream www.limeng.com {
    server 192.168.23.16;
    server 192.168.23.17;
    server 192.168.23.18;
    #设置nginx连接tomcat之间得连接为长连接。此设置默认关闭，导致nginx与tomcat得time_wait短暂，造成资源浪费，keepalive默认单位秒，官方建议16不可大不可小。
    keepalive 16
}
server {
        listen       80;
        server_name limeng;
        index  index.html index.htm index.jsp index.do;
        #默认代理本机默认页面
        location / { 
                proxy_pass http://www.limeng.com;
        } 
        #设置缓存策略
        location ~ .*.(html|htm|gif|jpg|jpeg|bmp|png|ico|txt|js|css)$ 
        {
            root /usr/local/nginx/ROOT;
            if (-f $request_filename) {
            expires 1d;
            break;
            }
            proxy_cache_key ‘$host:$server_port$request_uri‘;#缓存服务和路径
            proxy_redirect off;
            proxy_cache cache_one；#缓存的zone名
            proxy_cache_valid 200 302 1h; #缓存200和302时间1小时
            proxy_cache_valid 301 1d;#缓存301时间为1天
            proxy_cache_valid any 1m; #其他缓存为1个月
            expires 7d;
        }  
        #设置其他未缓存策略  
         location ~ .*$(jsp|do)
       {
            #设置长连接策略，nginx默认为http1.0，而tomcat默认为http1.1 。
            proxy_http_version 1.1;
            proxy_set_header Connection "";
            proxy_pass http://www.limeng.com
            if (-f $request_filename) {
            expires 1d;
            break;
            } 
        }
        #禁止nginx访问tomcat的关键目录
       location ~ ^/(WEB-INF|META-INF)/{
                deny all;
        }
        #默认的访问代码
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }
    }

注俩台nginx配置一样

nginx启动脚本自行谷歌

chmod 755 /etc/init.d/nginx

启动nginx

/etc/init.d/nginx start

Nginx安装完成

4、后端web服务器Tomcat安装

jdk安装

安装前准备

yum -y install gcc*wget vim

检查命令

java -version
java -version

卸载

rpm -e --nodeps jdk

解压安装

wget http://download.oracle.com/otn-pub/java/jdk/8u144-b01/090f390dda5b47b9b721c7dfaa008135/jdk-8u144-linux-x64.tar.gz?AuthParam=1502180263_4da80e17ef2af74cdbd6c02a779d1db6
tar -zxvf jdk-8u144-linux-x64.tar.gz

移动目录

mv ./jdk1.8.0_121/usr/local/java/

最后再删除安装文件

rm -rf jdk-8u144-linux-x64.gz

配置环境变量

vi /etc/profile加入以下变量
exportJAVA_HOME=/usr/local/java/
exportCLASSPATH=.:$JAVA_HOME/jre/lib/rt.jar:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar
exportPATH=$PATH:$JAVA_HOME/bin

加载变量

source /etc/profile

tomcat安装

解压

wget http://mirror.bit.edu.cn/apache/tomcat/tomcat-9/v9.0.0.M22/bin/apache-tomcat-9.0.0.M18.tar.gz
tar -zxvf apache-tomcat-9.0.0.M18.tar.gz

解压完整后删除安装包

rm -rf apache-tomcat-9.0.0.M18.tar.gz

移动目录

mkdir /usr/local/tomcat/
mv ./apache-tomcat-9.0.0.M18//usr/local/tomcat/

首先我们来配置一下tomcat的环境变量和内存设置进入tomcat的bin目录后通过vim命令打开catalina.sh文件并在其中加入如下配置>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

xms：初始化内存。

xmx：最大内存，一般为物理机的1/4。（和xms一样为了防止内存溢出）

xmn：tomcat最小内存，一般为xmn的一半的值。

JAVA_OPTS="-Dfile.encoding=UTF-8 -server -Xms1024m -Xmx1024m -Xmn512m  
-XX:SurvivorRatio=10 
-XX:MaxTenuringThreshold=15 
-XX:NewRatio=2 
-XX:+DisableExplicitGC"
export TOMCAT_HOME=/tmp/tomcat/apache-tomcat-9.0.0.M18
export CATALINA_HOME=/tmp/tomcat/apache-tomcat-9.0.0.M18
export JRE_HOME=/tmp/java/jdk1.8.0_121
export JAVA_HOME=/tmp/java/jdk1.8.0_121

server.xml优化配置 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

maxThreads：tomcat最大线程组。

minSpareThreads：tomcat初始线程值。

maxSpareThreads：tomcat空闲线程，超过这个线程将关闭无用线程值。

acceptCount：当所有可以使用的处理请求的线程数都被使用时，可以放到处理队列中的请求数，超过这个数的请求将不予处理。

    <Connector port="8080" protocol="HTTP/1.1"
               maxThreads="8000"
               minSpareThreads="2000"
               maxSpareThreads="1000"
               acceptCount="1000"
               URIEncoding="utf-8"
               server="Neo App Srv 1.0"
               connectionTimeout="20000"
               redirectPort="8443" />

启动

./startup.sh

5、mysql安装配置

安装前准备

yum -y install makegcc cmake bison-devel ncurses-devel libaio libaio-devel per-Data-Dumpernet-tools gcc* wget vim autoconf

查看是否有mysql的rpm包

rpm -qa |grep mysql
rpm -e --nodeps mysql

查看是否有mariadb-libs的rpm包

rpm -qa |grep mariadb-libs
yum -y install mariadb-libs

解压文件

wget https://www.mysql.com/downloads/mysql-5.6.23.tar.gz
tar -zxf /data/mysql-5.6.23.tar.gz

编译安装

cmake 
-DCMAKE_INSTALL_PREFIX=/usr/local/mysql 
-DMYSQL_DATADIR=/usr/local/mysql/data 
-DSYSCONFDIR=/etc 
-DWITH_MYISAM_STORAGE_ENGINE=1 
-DWITH_INNOBASE_STORAGE_ENGINE=1 
-DWITH_MEMORY_STORAGE_ENGINE=1 
-DWITH_READLINE=1 
-DMYSQL_UNIX_ADDR=/var/lib/mysql/mysql.sock 
-DMYSQL_TCP_PORT=3306 
-DENABLED_LOCAL_INFILE=1 
-DWITH_PARTITION_STORAGE_ENGINE=1 
-DEXTRA_CHARSETS=all 
-DDEFAULT_CHARSET=utf8 
-DDEFAULT_COLLATION=utf8_general_ci
make &&make install

建立用户和组

groupadd mysql
useradd mysql -s/sbin/nologin -g mysql

给权限

chown -Rmysql:mysql /usr/local/mysql/

mysql下的初始化

/usr/local/mysql/scripts/mysql_install_db--user=mysql --basedir=/usr/local/mysql/

拷贝配置文件my.cnf

cd support-files/
cp my-default.cnf /etc/my.cnf

配置mysql

[client]
port=3306  
socket=/var/lib/mysql/mysql.sock
#socket线程，建议设置，如果设置为默认，意外重启后可能会报错。
[mysql]
no-auto-rehash
#启动条件，优化启动时间。
[mysqld]
user=mysql
port=3306
basedir=/usr/local/mysql
#mysql主目录
datadir=/var/lib/mysql
#mysql数据目录
open_files_limit=10240
#打开文件数
back_log=600
#TCP/IP连接监听队列大小，默认80
max_connections = 3000
#最大进程连接数，默认151
external-locking = FALSE
#避免外部锁定，默认开启
max_allowed_packet = 32M
#设置网络传输一次消息的最大，默认为4M
thread_cache_size = 300
#配置服务器线程的缓存值，为M
key_buffer_size = 2048M
#批定用于索引的缓冲区大小
read_rnd_buffer_size = 16M
#MySql的随机读（查询操作）缓冲区大小，尽量适当设置该值，以避免内存开销过大
bulk_insert_buffer_size = 64M
#批量插入数据缓存大小，默认为8M
innodb_buffer_pool_size = 2048M
#这对Innodb表来说非常重要，设置它高达 70-80% 的可用内存。
skip-name-resolve
#跳过域名
#skip-innodb
#不使用innodb引擎，5.5默认使用innodb，性能优越。
# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0
# Settings user and group are ignored when systemd is used.
# If&n`sp;xou need to run mysqld under a different user or group,
# customize your systemd unit file for mariadb according to the
# instructions in http://fedoraproject.org/wiki/Systemd
[mysqld_safe]
log-error=/var/log/mysql_error.log
pid-file=/var/run/mysql/mysql.pid
#
# include all files from the config directory
#
!includedir /etc/my.cnf.d

添加变量

echo "exportPATH=$PATH:/usr/local/mysql/bin" >> /etc/profile
source /etc/profile

添加开机启动

cp/usr/local/mysql/./support-files/mysql.server /etc/rc.d/init.d/mysqld
chmod +x/etc/init.d/mysqld
chkconfig --addmysqld
chkconfig mysqld on

启动mysql

systemctl startmysqld.service

查看端口

netstat -anpt |grepmysql

编辑etc下的my.cnf文件

设置mysql密码

mysqladmin -uroot password

六、redis安装

解压安装

wget https://redis.io/download/redis-3.2.8.tar.gz
tar -zxf /data/redis-3.2.8.tar.gz
cd redis-3.2.8
make PREFIX=/usr/local/redis install

执行完进入目录/usr/local/redis

建立文件夹并拷贝

mkdir /etc/redis
cp -rf /data/redis-3.2.8/redis.conf /etc/6379.conf

编辑配置文件vim/etc/redis/6379.conf

daemonize yes
bind 192.168.23.21 127.0.0.1 (链接ip和本地
logfile "/var/log/redis.log"(自定义)
databases 16 (默认数据库数量
dbfilename dump.rdb 默认存储名
dir/tmp/redis/data/redisdata 默认数据存放目录
requirepass password (自己设置redis的密码)

启动redis

./redis_server /usr/local/redis/redis.conf

七、rabbitmq安装

安装前准备

yum -y install makegcc gcc-c++ kernel-devel m4 ncurses-devel openssl-devel

解压 zlang

tar -zxf /data/otp_src_19.3.tar.gz
cd otp_src_19.3

编译安装

./configure 
--prefix=/usr/local/erlang 
--with-ssl 
-enable-threads 
-enable-smmp-support 
-enable-kernel-poll 
--enable-hipe 
--without 
-javac 
make && make install

安装rtabbitmq

wget 鑤tp:o/wuw.rabbitmq.com/download.html/rabbitmq-server-generic-unix-3.6.10.tar.xz
tar -xf rabbitmq-server-generic-unix-3.6.10.tar.xz

移动位置

mv rabbitmq_server-3.6.10/ /usr/local/rabbitmq-3.6.10/
cd rabbitmq-3.6.10/sbin

启动rabbitmq

./rabbitmq-plugins enabler abbitmq_management
./rabbitmq-server -detached后台启动

停止

./rabbitmqctl stop

查看程序和端口运行状态

ps aux |grep rabbitmq
netstat -anpt |grep 15672

添加账户并设置为管理员

./rabbitmqctl add_user admin password
./rabbitmq set_tagsadmin administrator

删除默认用户guest

./rabbitmqctl delete_user guest

查看设置用户是否存在

./rabbitmqctl list_users

二、测试集群

在界面打开浏览器测试访问192.168.23.20如下

期间不断的刷新会出现不同的后端web页面。

技术分享图片

关闭master测试访问正常backup接替工作

systemctl stop keepalived

技术分享图片