1841 router2添加 hwic-8a模块 octal线"/>

packet tracer 配置 终端服务器 最简单配置

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了packet tracer 配置 终端服务器 最简单配置相关的知识,希望对你有一定的参考价值。

技术分享



1841 router2 添加   hwic-8a 模块  octal 线缆连接  1841 router2  async 0/0/0 与   1841   router3 console


1841 router2配置如下:



Router>enable


Router#conf t


Enter configuration commands, one per line.  End with CNTL/Z.


Router(config)#interface loopback 0


Router(config-if)#


%LINK-5-CHANGED: Interface Loopback0, changed state to up


%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up


Router(config-if)#ip address 1.1.1.1 255.255.255.255


Router(config-if)#end


Router#


%SYS-5-CONFIG_I: Configured from console by console


Router#show line


   Tty Line Typ     Tx/Rx    A Roty AccO AccI   Uses   Noise  Overruns   Int

*    0    0 CTY              -    -    -    -      0       0     0/0       -

     1    1 AUX   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/0    2 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/1    3 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/2    4 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/3    5 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/4    6 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/5    7 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/6    8 TTY   9600/9600  -    -    -    -      0       0     0/0       -

 0/0/7    9 TTY   9600/9600  -    -    -    -      0       0     0/0       -

   194  194 VTY              -    -    -    -      0       0     0/0       -

   195  195 VTY              -    -    -    -      0       0     0/0       -

   196  196 VTY              -    -    -    -      0       0     0/0       -

   197  197 VTY              -    -    -    -      0       0     0/0       -

   198  198 VTY              -    -    -    -      0       0     0/0       -

Line(s) not in async mode -or- with no hardware support:

10-193


Router#conf t


Enter configuration commands, one per line.  End with CNTL/Z.


Router(config)#line tty 2 9


Router(config-line)#password 888888


Router(config-line)#transport input all


Router(config-line)#end


Router#


%SYS-5-CONFIG_I: Configured from console by console


Router#telnet 1.1.1.1 2002


Trying 1.1.1.1 ...Open



User Access Verification


Password: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

Cisco 1841 (revision 5.0) with 114688K/16384K bytes of memory.


Readonly ROMMON initialized


Self decompressing the image :

######################### [OK]

              Restricted Rights Legend


Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.


           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706




Cisco ios Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 18-Jul-07 04:52 by pt_team

Image text-base: 0x60080608, data-base: 0x6270CD50



This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.


A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html


If you require further assistance please contact us by sending email to

[email protected]



Cisco 1841 (revision 5.0) with 114688K/16384K bytes of memory.

Processor board ID FTX0947Z18E

M860 processor: part number 0, mask 49

2 FastEthernet/IEEE 802.3 interface(s)

191K bytes of NVRAM.

63488K bytes of ATA CompactFlash (Read/Write)

Cisco IOS Software, 1841 Software (C1841-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 18-Jul-07 04:52 by pt_team


Press RETURN to get started!







以上是关于packet tracer 配置 终端服务器 最简单配置的主要内容,如果未能解决你的问题,请参考以下文章

packet tracer 配置 终端服务器 最简单配置

Cisco Packet Tracer 网络软件的使用记录

通过思科模拟器CISCO PACKET TRACER学习网络4——VLAN间路由

第一次实验报告:使用Packet Tracer分析HTTP数据包

Cisco Packet Tracer

通过思科模拟器CISCO PACKET TRACER学习网络7——静态路由