Linux日志管理工具 journalctl

Posted 2021-06-15 白-胖-子

日志

Linux日志管理基本概念

journalctl

• 查询所有系统服务日志内容

• journalctl may be used to query the contents of the systemd(1) journal as written by systemd- journald.service(8).

• CentOS 7 及以后版本，利用Systemd 统一管理所有 Unit 的启动日志。

• 带来的好处就是，可以只用journalctl一个命令，查看所有系统日志

• 查看内容包括内核日志和应用日志。

journalctl最常用法

systemctl status 服务名
journalctl -xe

• 每次启动服务出错都会让先查看服务状态

• 再执行journalcrl查看日志中记录的错误信息

journalctl 来自系统systemd

journalctl is /usr/bin/journalctl

[root@C8-186 ~]# rpm -qi journalctl
package journalctl is not installed
[root@C8-186 ~]# which journalctl
/usr/bin/journalctl
[root@C8-186 ~]# whatis journalctl
journalctl (1)       - Query the systemd journal
[root@C8-186 ~]# yum provides journalctl
systemd-239-41.el8_3.2.i686 : System and Service
                            : Manager
Repo        : BaseOS
Matched from:
Filename    : /usr/bin/journalctl

systemd-239-41.el8_3.2.x86_64 : System and Service
                              : Manager
Repo        : @System
Matched from:
Filename    : /usr/bin/journalctl

systemd-239-41.el8_3.2.x86_64 : System and Service
                              : Manager
Repo        : BaseOS
Matched from:
Filename    : /usr/bin/journalctl

journalctl配置文件：

/etc/systemd/journald.conf

• 注释掉的都是默认值

[root@C8-186 ~]# cat /etc/systemd/journald.conf 
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU Lesser General Public License as published by
#  the Free Software Foundation; either version 2.1 of the License, or
#  (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See journald.conf(5) for details.

[Journal]
#Storage=auto
#Compress=yes
#Seal=yes
#SplitMode=uid
#SyncIntervalSec=5m
#RateLimitIntervalSec=30s
#RateLimitBurst=10000
#SystemMaxUse=
#SystemKeepFree=
#SystemMaxFileSize=
#SystemMaxFiles=100
#RuntimeMaxUse=
#RuntimeKeepFree=
#RuntimeMaxFileSize=
#RuntimeMaxFiles=100
#MaxRetentionSec=
#MaxFileSec=1month
#ForwardToSyslog=no
#ForwardToKMsg=no
#ForwardToConsole=no
#ForwardToWall=yes
#TTYPath=/dev/console
#MaxLevelStore=debug
#MaxLevelSyslog=debug
#MaxLevelKMsg=notice
#MaxLevelConsole=info
#MaxLevelWall=emerg
#LineMax=48K

journalctl常见用法示例

#查看所有日志（默认情况下 ，只保存本次启动的日志）
journalctl
#查看内核日志（不显示应用日志）
journalctl -k
#查看系统本次启动的日志
journalctl -b
journalctl -b -0
#查看上一次启动的日志（需更改设置）
journalctl -b -1
#查看指定时间的日志
journalctl --since="2017-10-30 18:10:30"
journalctl --since "20 min ago"
journalctl --since yesterday
journalctl --since "2017-01-10" --until "2017-01-11 03:00"
journalctl --since 09:00 --until "1 hour ago"
#显示尾部的最新10行日志
journalctl -n
#显示尾部指定行数的日志
journalctl -n 20
#实时滚动显示最新日志
journalctl -f
#查看指定服务的日志
journalctl /usr/lib/systemd/systemd
#查看指定进程的日志
journalctl _PID=1
#查看某个路径的脚本的日志
journalctl /usr/bin/bash
#查看指定用户的日志
journalctl _UID=33 --since today
#查看某个 Unit 的日志
journalctl -u nginx.service
journalctl -u nginx.service --since today
#实时滚动显示某个 Unit 的最新日志
journalctl -u nginx.service -f
#合并显示多个 Unit 的日志
journalctl -u nginx.service -u php-fpm.service --since today
#查看指定优先级（及其以上级别）的日志，共有8级
0: emerg
1: alert
2: crit
3: err
4: warning
5: notice
6: info
7: debug
journalctl -p err -b
#日志默认分页输出，--no-pager 改为正常的标准输出
journalctl --no-pager
#日志管理journalctl
#以 JSON 格式（单行）输出
journalctl -b -u nginx.service -o json
#以 JSON 格式（多行）输出，可读性更好
journalctl -b -u nginx.serviceqq -o json-pretty
#显示日志占据的硬盘空间
journalctl --disk-usage
#指定日志文件占据的最大空间
journalctl --vacuum-size=1G
#指定日志文件保存多久
journalctl --vacuum-time=1years

journalctl 命令格式和选项

[root@C8-186 ~]# journalctl --help
journalctl [OPTIONS...] [MATCHES...]

Query the journal.

Options:
     --system                Show the system journal
     --user                  Show the user journal for the current user
  -M --machine=CONTAINER     Operate on local container
  -S --since=DATE            Show entries not older than the specified date
  -U --until=DATE            Show entries not newer than the specified date
  -c --cursor=CURSOR         Show entries starting at the specified cursor
     --after-cursor=CURSOR   Show entries after the specified cursor
     --show-cursor           Print the cursor after all the entries
  -b --boot[=ID]             Show current boot or the specified boot
     --list-boots            Show terse information about recorded boots
  -k --dmesg                 Show kernel message log from the current boot
  -u --unit=UNIT             Show logs from the specified unit
     --user-unit=UNIT        Show logs from the specified user unit
  -t --identifier=STRING     Show entries with the specified syslog identifier
  -p --priority=RANGE        Show entries with the specified priority
  -g --grep=PATTERN          Show entries with MESSAGE matching PATTERN
     --case-sensitive[=BOOL] Force case sensitive or insenstive matching
  -e --pager-end             Immediately jump to the end in the pager
  -f --follow                Follow the journal
  -n --lines[=INTEGER]       Number of journal entries to show
     --no-tail               Show all lines, even in follow mode
  -r --reverse               Show the newest entries first
  -o --output=STRING         Change journal output mode (short, short-precise,
                               short-iso, short-iso-precise, short-full,
                               short-monotonic, short-unix, verbose, export,
                               json, json-pretty, json-sse, cat, with-unit)
     --output-fields=LIST    Select fields to print in verbose/export/json modes
     --utc                   Express time in Coordinated Universal Time (UTC)
  -x --catalog               Add message explanations where available
     --no-full               Ellipsize fields
  -a --all                   Show all fields, including long and unprintable
  -q --quiet                 Do not show info messages and privilege warning
     --no-pager              Do not pipe output into a pager
     --no-hostname           Suppress output of hostname field
  -m --merge                 Show entries from all available journals
  -D --directory=PATH        Show journal files from directory
     --file=PATH             Show journal file
     --root=ROOT             Operate on files below a root directory
     --interval=TIME         Time interval for changing the FSS sealing key
     --verify-key=KEY        Specify FSS verification key
     --force                 Override of the FSS key pair with --setup-keys

Commands:
  -h --help                  Show this help text
     --version               Show package version
  -N --fields                List all field names currently used
  -F --field=FIELD           List all values that a specified field takes
     --disk-usage            Show total disk usage of all journal files
     --vacuum-size=BYTES     Reduce disk usage below specified size
     --vacuum-files=INT      Leave only the specified number of journal files
     --vacuum-time=TIME      Remove journal files older than specified time
     --verify                Verify journal file consistency
     --sync                  Synchronize unwritten journal messages to disk
     --flush                 Flush all journal data from /run into /var
     --rotate                Request immediate rotation of the journal files
     --header                Show journal header information
     --list-catalog          Show all message IDs in the catalog
     --dump-catalog          Show entries in the message catalog
     --update-catalog        Update the message catalog database
     --new-id128             Generate a new 128-bit ID
     --setup-keys            Generate a new FSS key pair
lines 33-66/66 (END)