RationalDMIS 2020高级编程之有限循环（DO循环）

Posted 2022-06-07 山涧果子

UNITS/MM,ANGDEC
DECPL/ALL,DEFALT
V(0)=VFORM/ALL,PLOT
DISPLY/TERM,V(0),STOR,DMIS,V(0)
TECOMP/OFF
SNSET/APPRCH,5
SNSET/CLRSRF,15
SNSET/DEPTH,0
D(0)=DATSET/MCS
MODE/MAN
T(CORTOL_X1)=TOL/CORTOL,XAXIS,-0.1,0.1
T(CORTOL_Y1)=TOL/CORTOL,YAXIS,-0.1,0.1
T(CORTOL_Z1)=TOL/CORTOL,ZAXIS,-0.1,0.1
T(DIAM_1)=TOL/DIAM,-0.1,0.1
$$ Sensor definition added by template
RECALL/SA(Z+50A0B0)
SNSLCT/SA(Z+50A0B0)
DECL/GLOBAL,INTGR,xunhuan                         定义变量 名称:xunhuan 类型:整数 范围 程序
DO/xunhuan,1,5,1                                             循环向导 起始 1 次数 5  增量1
$$Enter loop code here
MODE/AUTO,PROG,MAN                                    自动模式
$$ MEAS    PLANE
MODE/AUTO,PROG,MAN
GOTO/787.2424,208.0933,-501.5719
F(PL001)=FEAT/PLANE,CART,772.8629,242.7484,-564.3722,0.9989,0.0471,0.0002
MEAS/PLANE,F(PL001),3
PTMEAS/CART,774.0909,216.697,-559.437,0.9989,0.0471,0.0002
PTMEAS/CART,773.1507,236.6729,-570.2216,0.9989,0.0471,0.0002
PTMEAS/CART,771.347,274.8754,-563.458,0.9989,0.0471,0.0002
ENDMES
$$ ENDMES
GOTO/780.5083,274.4081,-524.4838
GOTO/718.4723,281.711,-524.4843
$$ MEAS    PLANE
MODE/AUTO,PROG,MAN
F(PL002)=FEAT/PLANE,CART,732.5869,247.5238,-561.4028,-0.9989,-0.0471,0.0002
MEAS/PLANE,F(PL002),3
PTMEAS/CART,731.1673,277.6208,-559.376,-0.9989,-0.0471,0.0002
PTMEAS/CART,732.6251,246.6914,-566.4815,-0.9989,-0.0471,0.0002
PTMEAS/CART,733.9681,218.2592,-558.351,-0.9989,-0.0471,0.0002
ENDMES
$$ ENDMES
GOTO/729.0011,218.0118,-512.8091
T(0)=TOL/DISTB,NOMINL,40,-0.1,0.1,PT2PT,AVG
OUTPUT/FA(PL001),FA(PL002),TA(0)
ENDDO                                                           结束循环
PAUSE
ENDFIL