搜索具有指定标签的幻灯片并将其替换为主演示文稿中的幻灯片

Posted 2023-03-21

【中文标题】搜索具有指定标签的幻灯片并将其替换为主演示文稿中的幻灯片

【英文标题】：Searching for a slide with a specified tag and replacing it with a slide from a master presentation

【发布时间】：2021-09-03 08:24:33

【问题描述】：

我希望在演示文稿中搜索一张或多张具有指定标签的幻灯片。找到后，我想用母版演示文稿中的另一张幻灯片替换该幻灯片。

我试图用我收集的其他 VBA 的一部分创建一个解决方案。我感觉我已经很接近了，但还没有到那里（注意下面的内容让我陷入了循环）。

任何帮助将不胜感激

Sub ReplaceSlideThatHasTag()


For Each osld In ActivePresentation.Slides

'here I am selecting the slide that has the tag name "winter" and the tag id "123
If osld.Tags("WINTER") = "123" Then osld.Select

'here I am trying to add slide 27 from my master presentation immediately before the slide with the tag
ActivePresentation.Slides.InsertFromFile ("C:\my files\master presentation.PPTX"), ActiveWindow.Selection.SlideRange.SlideIndex, 24, 24

'and finally I am looking to delete the slide with the tag
If osld.Tags("WINTER") = "123" Then osld.Delete


Next osld

End Sub

【参考方案1】：

一些一般性的建议：除非无法避免，否则永远不要选择任何东西，而且几乎从来没有无法避免的情况。下面的建议（带评论）。试试这个版本。

Sub ReplaceSlideThatHasTag()

' ALWAYS dim your variables before using them
Dim osld as Slide

For Each osld In ActivePresentation.Slides

'here I am selecting the slide that has the tag name "winter" and the tag id "123

If osld.Tags("WINTER") = "123" Then '  DON'T select anythin osld.Select

'here I am trying to add slide 27 from my master presentation immediately before the slide with the tag
'ActivePresentation.Slides.InsertFromFile ("C:\my files\master presentation.PPTX"), 'ActiveWindow.Selection.SlideRange.SlideIndex, 24, 24

' But since we're not selecting anything ...
ActivePresentation.Slides.InsertFromFile ("C:\my files\master presentation.PPTX"), _ osld.SlideIndex

'and finally I am looking to delete the slide with the tag
' But we already have a reference to the slide in the osld variable
' and we know that the slide has the tag so ...
'If osld.Tags("WINTER") = "123" Then osld.Delete
osld.Delete

' And since we've found the slide and done the deed,
' no need to continue...
Exit For
End If
Next osld

End Sub

【讨论】：

非常感谢您的建议 - 这真的很有用。我无法让您的代码正常工作 - 我收到“没有 for 的下一个”错误。任何想法我做错了什么？

抱歉，我的错。我已经编辑了代码来解决这个问题。只需在 EXIT FOR 后添加一个 END IF