错误：____未在此范围内声明

Posted 2023-02-16

【中文标题】错误：____未在此范围内声明

【英文标题】：error: ____ was not declared in this scope

【发布时间】：2011-06-29 02:51:12

【问题描述】：

当我尝试编译我的 publishJoints 代码时，我不断收到错误提示超出范围。

这里是 publishJoints.cpp 代码

#include <string>
#include <ros/ros.h>
#include <sensor_msgs/JointState.h>
#include <vector>
#include <stdio.h>
#include "GestureFile.h"
#define DOF 19
#define DIR_mt4      1
#define DIR_ma14     1
#define DIR_ma12     1
#define COUNT_DEG   2222    //encoder count per deg


enum parts

    m3joint_mt4_j0,
    m3joint_mt4_j1,
    m3joint_slave_mt4_j2,
    left_shoulder_pan_joint,
    left_shoulder_lift_joint,
    left_elbow_pan_joint,
    left_elbow_lift_joint,             
    m3joint_ma14_j4,
    m3joint_ma14_j5,
    m3joint_ma14_j6,
    right_shoulder_pan_joint,
    right_shoulder_lift_joint,
    right_elbow_pan_joint,
    right_elbow_lift_joint,
    m3joint_ma12_j4,
    m3joint_ma12_j5,
    m3joint_ma12_j6,
    Neck_Casing,
    Head_Casing,

;

int main(int argc, char** argv) 
    ros::init(argc, argv, "publishJoints");
    ros::NodeHandle n;
    ros::Publisher joint_pub = n.advertise<sensor_msgs::JointState>("joint_states", 100);
    ros::Rate loop_rate(100000);

    const double degree = M_PI/180;

    // robot state
    double swivel=0;
    double tilt=0;


    // message declarations
    sensor_msgs::JointState joint_state;

   joint_state.name.resize(19);
   joint_state.position.resize(19);




    while (ros::ok()) 
        //update joint_state
        joint_state.header.stamp = ros::Time::now();

        swivel=0;
        joint_state.name[0] ="m3joint_mt4_j0";
        joint_state.position[0] = swivel;

        joint_state.name[1] ="m3joint_mt4_j1";
        joint_state.position[1] = swivel;

        joint_state.name[2] ="m3joint_slave_mt4_j2";
        joint_state.position[2] = tilt;

        joint_state.name[3] ="left_shoulder_pan_joint";
        joint_state.position[3] = tilt;

        joint_state.name[4] ="left_shoulder_lift_joint";
        joint_state.position[4] = tilt;

        joint_state.name[5] ="left_elbow_pan_joint";
        joint_state.position[5] = tilt;

        joint_state.name[6] ="left_elbow_lift_joint";
        joint_state.position[6] = tilt;

        joint_state.name[7] ="m3joint_ma14_j4";
        joint_state.position[7] = swivel;

        joint_state.name[8] ="m3joint_ma14_j5";
        joint_state.position[8] = swivel;

        joint_state.name[9] ="m3joint_ma14_j6";
        joint_state.position[9] = swivel;

        joint_state.name[10] ="right_shoulder_pan_joint";
        joint_state.position[10] = swivel;

        joint_state.name[11] ="right_shoulder_lift_joint";
        joint_state.position[11] = swivel;

        joint_state.name[12] ="right_elbow_pan_joint";
        joint_state.position[12] = swivel;

        joint_state.name[13] ="right_elbow_lift_joint";
        joint_state.position[13] = swivel;

        joint_state.name[14] ="m3joint_ma12_j4";
        joint_state.position[14] = tilt;

        joint_state.name[15] ="m3joint_ma12_j5";
        joint_state.position[15] = tilt;

        joint_state.name[16] ="m3joint_ma12_j6" ;
        joint_state.position[16] = tilt;

        joint_state.name[17] ="Neck_Casing" ;
        joint_state.position[17] = tilt;

        joint_state.name[18] ="Head_Casing" ;
        joint_state.position[18] = tilt;


    tilt += 0.000001;


        //send the joint state and transform
        joint_pub.publish(joint_state);

        // This will adjust as needed per iteration
        loop_rate.sleep();
    




    return 0;


int readDynamicGestureFile(points_body_t gesture[][10000], int *numOfCoords)

    int number=0;
    char buff[500];
    double position[DOF]=0;
    int time;
    FILE* ifp=NULL;

    //there is only one file to read
    memset(&buff,0,sizeof(buff));

    if ( fopen_s(&ifp, "C://share/Motion.csv","r") != 0 )
    
        AfxMessageBox( "Cannot open Motion File that was sent");
        return 0;
    

    do 
            fgets(buff,500,ifp);

            int result = sscanf_s(buff, "%d %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf  %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf %*c %lf",
                &time,
                &position[0],   //m3joint_mt4_j0
                &position[1],   //m3joint_mt4_j1
                &position[2],   //m3joint_slave_mt4_j2
                &position[3],   //left_shoulder_pan_joint
                &position[4],   //left_shoulder_lift_joint

                &position[5],   //left_elbow_pan_joint
                &position[6], //left_elbow_lift_joint             
                &position[7],   //m3joint_ma14_j4
                &position[8],   //m3joint_ma14_j5
                &position[9],   //m3joint_ma14_j6
                &position[10], //right_shoulder_pan_joint
                &position[11], //right_shoulder_lift_joint

                &position[12],  //right_elbow_pan_joint
                &position[13],  //right_elbow_lift_joint
                &position[14],  //m3joint_ma12_j4
                &position[15],  //m3joint_ma12_j5
                &position[16],  //m3joint_ma12_j6
                &position[17],  //Neck_Casing
                &position[18]   //Head_Casing

            );  

            //*********************//
            //  Conversion Matrix  //
            //*********************//

            gesture[0][number].m3joint_mt4_j0   = (int)( 0 );
            //gesture[0][number].ptorso_1   = (int)( DIR_T1 * -position[1] );
            gesture[0][number].m3joint_mt4_j1   = (int)( 0 );

            /////////////////////////////////////////////////////////////////////////       
            gesture[0][number].m3joint_slave_mt4_j2     = (int)( DIR_mt4 * COUNT_DEG * (-position[2]) );
            gesture[0][number].left_shoulder_pan_joint  = (int)( DIR_ma14 * COUNT_DEG * -position[3] );
            gesture[0][number].left_shoulder_lift_joint     = (int)( DIR_ma14 * COUNT_DEG * position[4] );

            ////////////////////////////////////////////////////////////////
            gesture[0][number].left_elbow_pan_joint   = (int)(  DIR_ma14 * COUNT_DEG * (position[5] + 90 ) );
            gesture[0][number].left_elbow_lift_joint  = (int)(  DIR_ma14 * COUNT_DEG * position[6] );
            gesture[0][number].m3joint_ma14_j4        = (int)(  DIR_ma14 * COUNT_DEG * ( -position[7] -90) );

            gesture[0][number].m3joint_ma14_j5              = (int)( COUNT_DEG * -position[8] );
            gesture[0][number].m3joint_ma14_j6              = (int)( COUNT_DEG * -position[9] );
            gesture[0][number].right_shoulder_pan_joint         = (int)( COUNT_DEG * -position[10] );
            //gesture[0][number].right_shoulder_lift_joint = (int)( COUNT_DEG * position[11] );

            ///////////////////////////////////////////////////////////////////
            gesture[0][number].right_elbow_pan_joint      = (int)(  COUNT_DEG * ( -position[12] - 90 ) );
            gesture[0][number].right_elbow_lift_joint     = (int)(  COUNT_DEG * position[13] );
            //gesture[0][number].pR_upper_2 = (int)( COUNT_DEG * ( 90-position[R_upper_2] ) );
            gesture[0][number].m3joint_ma12_j4            = (int)(  COUNT_DEG * ( -position[14] + 90 ) );

            gesture[0][number].m3joint_ma12_j5= (int)( COUNT_DEG * -position[15] );
            gesture[0][number].m3joint_ma12_j6= (int)( COUNT_DEG * -position[16] );
            gesture[0][number].Neck_Casing = (int)( COUNT_DEG * -position[17] );
            gesture[0][number].Head_Casing = (int)( COUNT_DEG * position[18] );

            number++;

         while(!feof(ifp));

    numOfCoords[0] = number;
    fclose(ifp);

    return 1;

以下是我编译时的错误信息。

错误：“fopen_s”未在此范围内声明

错误：“AfxMessageBox”未在此范围内声明

错误：“sscanf_s”未在此范围内声明

任何帮助将不胜感激。

【参考方案1】：

fopen_s 和 sscanf_s 函数是 Microsoft 对 C 标准库的特定扩展，与默认存在的函数相比，它们不易出错（危险）。

如果您在非 Microsoft 平台上进行编译，则需要找到这些函数的自定义实现。我不相信gcc 或g++ 有自己的这些函数版本。

如果您在 Microsoft 平台上进行编译，则可能需要升级到较新版本的 Visual Studio。

【讨论】：

感谢 templatetypedef。能够修复 fopen_s 和 sscanf_s，但是如何解决 AfxMessageBox 错误。