HDOJ1069动态规划
Posted MekakuCityActor
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了HDOJ1069动态规划相关的知识，希望对你有一定的参考价值。
http://acm.hdu.edu.cn/showproblem.php?pid=1069
Monkey and Banana
Time Limit: 2000/1000 MS (Java/Others) Memory Limit: 65536/32768 K (Java/Others)
Total Submission(s): 18668 Accepted Submission(s): 9934
Problem Description
A group of researchers are designing an experiment to test the IQ of a monkey. They will hang a banana at the roof of a building, and at the mean time, provide the monkey with some blocks. If the monkey is clever enough, it shall be able to reach the banana by placing one block on the top another to build a tower and climb up to get its favorite food.
The researchers have n types of blocks, and an unlimited supply of blocks of each type. Each type-i block was a rectangular solid with linear dimensions (xi, yi, zi). A block could be reoriented so that any two of its three dimensions determined the dimensions of the base and the other dimension was the height.
They want to make sure that the tallest tower possible by stacking blocks can reach the roof. The problem is that, in building a tower, one block could only be placed on top of another block as long as the two base dimensions of the upper block were both strictly smaller than the corresponding base dimensions of the lower block because there has to be some space for the monkey to step on. This meant, for example, that blocks oriented to have equal-sized bases couldn‘t be stacked.
Your job is to write a program that determines the height of the tallest tower the monkey can build with a given set of blocks.
The researchers have n types of blocks, and an unlimited supply of blocks of each type. Each type-i block was a rectangular solid with linear dimensions (xi, yi, zi). A block could be reoriented so that any two of its three dimensions determined the dimensions of the base and the other dimension was the height.
They want to make sure that the tallest tower possible by stacking blocks can reach the roof. The problem is that, in building a tower, one block could only be placed on top of another block as long as the two base dimensions of the upper block were both strictly smaller than the corresponding base dimensions of the lower block because there has to be some space for the monkey to step on. This meant, for example, that blocks oriented to have equal-sized bases couldn‘t be stacked.
Your job is to write a program that determines the height of the tallest tower the monkey can build with a given set of blocks.
Input
The input file will contain one or more test cases. The first line of each test case contains an integer n,
representing the number of different blocks in the following data set. The maximum value for n is 30.
Each of the next n lines contains three integers representing the values xi, yi and zi.
Input is terminated by a value of zero (0) for n.
representing the number of different blocks in the following data set. The maximum value for n is 30.
Each of the next n lines contains three integers representing the values xi, yi and zi.
Input is terminated by a value of zero (0) for n.
Output
For each test case, print one line containing the case number (they are numbered sequentially starting from 1) and the height of the tallest possible tower in the format "Case case: maximum height = height".
Sample Input
1
10 20 30
2
6 8 10
5 5 5
7
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
5
31 41 59
26 53 58
97 93 23
84 62 64
33 83 27
0
Sample Output
Case 1: maximum height = 40
Case 2: maximum height = 21
Case 3: maximum height = 28
Case 4: maximum height = 342
题目大意：给N种类型的长方体【每种任意多个】，摆放时要求上面的那个长方体的长和宽要严格小于下面的长和宽，求摆放方案中最高有多高。
题目分析：首先每个长方体有三种摆放的方式，而每个摆放方式都有摆与不摆两种方案，这就类似于最长上升子序列问题中某个数字取或者不取使用动态规划做，即DP【I】表示在第I种方案的木块被选择的情况下的最高高度
注意：为了能正确地进行迭代更新，应该先将木块进行一次排序，按底面积的大小排序，然后从面积大的 I 开始更新迭代
【这点很重要！因为只有底层得到正确的最大的值，后面的更新才有意义】
以上是关于HDOJ1069动态规划的主要内容，如果未能解决你的问题，请参考以下文章
动态规划Problem-1069 Monkey and Banana
HDU 1069 Monkey and Banana （动态规划）