day7文件操作

Posted 2020-11-03 feige6

一、对文件操作流程

1. 打开文件，得到文件句柄并赋值给一个变量
2. 通过句柄对文件进行操作
3. 关闭文件

#1. 打开文件，得到文件句柄并赋值给一个变量
f=open(‘a.txt‘,‘r‘,encoding=‘utf-8‘) #默认打开模式就为r

#2. 通过句柄对文件进行操作
data=f.read()

#3. 关闭文件
f.close()

二、关闭文件注意事项：

 1 打开一个文件包含两部分资源：操作系统级打开的文件+应用程序的变量。在操作完毕一个文件时，必须把与该文件的这两部分资源一个不落地回收，回收方法为：
 2 1、f.close() #回收操作系统级打开的文件
 3 2、del f #回收应用程序级的变量
 4 
 5 其中del f一定要发生在f.close()之后，否则就会导致操作系统打开的文件还没有关闭，白白占用资源，
 6 而python自动的垃圾回收机制决定了我们无需考虑del f，这就要求我们，在操作完毕文件后，一定要记住f.close()
 7 
 8 虽然我这么说，但是很多同学还是会很不要脸地忘记f.close(),对于这些不长脑子的同学，我们推荐傻瓜式操作方式：使用with关键字来帮我们管理上下文
 9 with open(‘a.txt‘,‘w‘) as f:
10     pass
11  
12 with open(‘a.txt‘,‘r‘) as read_f,open(‘b.txt‘,‘w‘) as write_f:
13     data=read_f.read()
14     write_f.write(data)

View Code

三、文件编码：

f=open(...)是由操作系统打开文件，那么如果我们没有为open指定编码，那么打开文件的默认编码很明显是操作系统说了算了，操作系统会用自己的默认编码去打开文件，在windows下是gbk，在linux下是utf-8。

四、文件的打开模式

文件句柄 = open（‘文件路径’，‘模式‘’     编码形式）

#1. 打开文件的模式有(默认为文本模式)：
r ，只读模式【默认模式，文件必须存在，不存在则抛出异常】
w，只写模式【不可读；不存在则创建；存在则清空内容】
a， 只追加写模式【不可读；不存在则创建；存在则只追加内容】

#2. 对于非文本文件，我们只能使用b模式，"b"表示以字节的方式操作（而所有文件也都是以字节的形式存储的，使用这种模式无需考虑文本文件的字符编码、图片文件的jgp格式、视频文件的avi格式）
rb 
wb
ab
注：以b方式打开时，读取到的内容是字节类型，写入时也需要提供字节类型，不能指定编码

#3,‘+’模式（就是增加了一个功能）
r+， 读写【可读，可写】
w+，写读【可写，可读】
a+， 写读【可写，可读】

#4，以bytes类型操作的读写，写读，写读模式
r+b， 读写【可读，可写】
w+b，写读【可写，可读】
a+b， 写读【可写，可读】

五、文件的操作方式

5.1、常见操作方法

read（3）：

　　1. 文件打开方式为文本模式时，代表读取3个字符

　　2. 文件打开方式为b模式时，代表读取3个字节

其余的文件内光标移动都是以字节为单位的如：seek，tell，truncate

注意：

　　1. seek有三种移动方式0，1，2，其中1和2必须在b模式下进行，但无论哪种模式，都是以bytes为单位移动的

　　2. truncate是截断文件，所以文件的打开方式必须可写，但是不能用w或w+等方式打开，因为那样直接清空文件了，所以truncate要在r+或a或a+等模式下测试效果。

5.2所有操作方法

class file(object)
    def close(self): # real signature unknown; restored from __doc__
        关闭文件
        """
        close() -> None or (perhaps) an integer.  Close the file.
         
        Sets data attribute .closed to True.  A closed file cannot be used for
        further I/O operations.  close() may be called more than once without
        error.  Some kinds of file objects (for example, opened by popen())
        may return an exit status upon closing.
        """
 
    def fileno(self): # real signature unknown; restored from __doc__
        文件描述符  
         """
        fileno() -> integer "file descriptor".
         
        This is needed for lower-level file interfaces, such os.read().
        """
        return 0    
 
    def flush(self): # real signature unknown; restored from __doc__
        刷新文件内部缓冲区
        """ flush() -> None.  Flush the internal I/O buffer. """
        pass
 
 
    def isatty(self): # real signature unknown; restored from __doc__
        判断文件是否是同意tty设备
        """ isatty() -> true or false.  True if the file is connected to a tty device. """
        return False
 
 
    def next(self): # real signature unknown; restored from __doc__
        获取下一行数据，不存在，则报错
        """ x.next() -> the next value, or raise StopIteration """
        pass
 
    def read(self, size=None): # real signature unknown; restored from __doc__
        读取指定字节数据
        """
        read([size]) -> read at most size bytes, returned as a string.
         
        If the size argument is negative or omitted, read until EOF is reached.
        Notice that when in non-blocking mode, less data than what was requested
        may be returned, even if no size parameter was given.
        """
        pass
 
    def readinto(self): # real signature unknown; restored from __doc__
        读取到缓冲区，不要用，将被遗弃
        """ readinto() -> Undocumented.  Don‘t use this; it may go away. """
        pass
 
    def readline(self, size=None): # real signature unknown; restored from __doc__
        仅读取一行数据
        """
        readline([size]) -> next line from the file, as a string.
         
        Retain newline.  A non-negative size argument limits the maximum
        number of bytes to return (an incomplete line may be returned then).
        Return an empty string at EOF.
        """
        pass
 
    def readlines(self, size=None): # real signature unknown; restored from __doc__
        读取所有数据，并根据换行保存值列表
        """
        readlines([size]) -> list of strings, each a line from the file.
         
        Call readline() repeatedly and return a list of the lines so read.
        The optional size argument, if given, is an approximate bound on the
        total number of bytes in the lines returned.
        """
        return []
 
    def seek(self, offset, whence=None): # real signature unknown; restored from __doc__
        指定文件中指针位置
        """
        seek(offset[, whence]) -> None.  Move to new file position.
         
        Argument offset is a byte count.  Optional argument whence defaults to
(offset from start of file, offset should be >= 0); other values are 1
        (move relative to current position, positive or negative), and 2 (move
        relative to end of file, usually negative, although many platforms allow
        seeking beyond the end of a file).  If the file is opened in text mode,
        only offsets returned by tell() are legal.  Use of other offsets causes
        undefined behavior.
        Note that not all file objects are seekable.
        """
        pass
 
    def tell(self): # real signature unknown; restored from __doc__
        获取当前指针位置
        """ tell() -> current file position, an integer (may be a long integer). """
        pass
 
    def truncate(self, size=None): # real signature unknown; restored from __doc__
        截断数据，仅保留指定之前数据
        """
        truncate([size]) -> None.  Truncate the file to at most size bytes.
         
        Size defaults to the current file position, as returned by tell().
        """
        pass
 
    def write(self, p_str): # real signature unknown; restored from __doc__
        写内容
        """
        write(str) -> None.  Write string str to file.
         
        Note that due to buffering, flush() or close() may be needed before
        the file on disk reflects the data written.
        """
        pass
 
    def writelines(self, sequence_of_strings): # real signature unknown; restored from __doc__
        将一个字符串列表写入文件
        """
        writelines(sequence_of_strings) -> None.  Write the strings to the file.
         
        Note that newlines are not added.  The sequence can be any iterable object
        producing strings. This is equivalent to calling write() for each string.
        """
        pass
 
    def xreadlines(self): # real signature unknown; restored from __doc__
        可用于逐行读取文件，非全部
        """
        xreadlines() -> returns self.
         
        For backward compatibility. File objects now include the performance
        optimizations previously implemented in the xreadlines module.
        """
        pass

python2.0操作方式

  1 class TextIOWrapper(_TextIOBase):
  2     """
  3     Character and line based layer over a BufferedIOBase object, buffer.
  4     
  5     encoding gives the name of the encoding that the stream will be
  6     decoded or encoded with. It defaults to locale.getpreferredencoding(False).
  7     
  8     errors determines the strictness of encoding and decoding (see
  9     help(codecs.Codec) or the documentation for codecs.register) and
 10     defaults to "strict".
 11     
 12     newline controls how line endings are handled. It can be None, ‘‘,
 13     ‘\n‘, ‘\r‘, and ‘\r\n‘.  It works as follows:
 14     
 15     * On input, if newline is None, universal newlines mode is
 16       enabled. Lines in the input can end in ‘\n‘, ‘\r‘, or ‘\r\n‘, and
 17       these are translated into ‘\n‘ before being returned to the
 18       caller. If it is ‘‘, universal newline mode is enabled, but line
 19       endings are returned to the caller untranslated. If it has any of
 20       the other legal values, input lines are only terminated by the given
 21       string, and the line ending is returned to the caller untranslated.
 22     
 23     * On output, if newline is None, any ‘\n‘ characters written are
 24       translated to the system default line separator, os.linesep. If
 25       newline is ‘‘ or ‘\n‘, no translation takes place. If newline is any
 26       of the other legal values, any ‘\n‘ characters written are translated
 27       to the given string.
 28     
 29     If line_buffering is True, a call to flush is implied when a call to
 30     write contains a newline character.
 31     """
 32     def close(self, *args, **kwargs): # real signature unknown
 33         关闭文件
 34         pass
 35 
 36     def fileno(self, *args, **kwargs): # real signature unknown
 37         文件描述符  
 38         pass
 39 
 40     def flush(self, *args, **kwargs): # real signature unknown
 41         刷新文件内部缓冲区
 42         pass
 43 
 44     def isatty(self, *args, **kwargs): # real signature unknown
 45         判断文件是否是同意tty设备
 46         pass
 47 
 48     def read(self, *args, **kwargs): # real signature unknown
 49         读取指定字节数据
 50         pass
 51 
 52     def readable(self, *args, **kwargs): # real signature unknown
 53         是否可读
 54         pass
 55 
 56     def readline(self, *args, **kwargs): # real signature unknown
 57         仅读取一行数据
 58         pass
 59 
 60     def seek(self, *args, **kwargs): # real signature unknown
 61         指定文件中指针位置
 62         pass
 63 
 64     def seekable(self, *args, **kwargs): # real signature unknown
 65         指针是否可操作
 66         pass
 67 
 68     def tell(self, *args, **kwargs): # real signature unknown
 69         获取指针位置
 70         pass
 71 
 72     def truncate(self, *args, **kwargs): # real signature unknown
 73         截断数据，仅保留指定之前数据
 74         pass
 75 
 76     def writable(self, *args, **kwargs): # real signature unknown
 77         是否可写
 78         pass
 79 
 80     def write(self, *args, **kwargs): # real signature unknown
 81         写内容
 82         pass
 83 
 84     def __getstate__(self, *args, **kwargs): # real signature unknown
 85         pass
 86 
 87     def __init__(self, *args, **kwargs): # real signature unknown
 88         pass
 89 
 90     @staticmethod # known case of __new__
 91     def __new__(*args, **kwargs): # real signature unknown
 92         """ Create and return a new object.  See help(type) for accurate signature. """
 93         pass
 94 
 95     def __next__(self, *args, **kwargs): # real signature unknown
 96         """ Implement next(self). """
 97         pass
 98 
 99     def __repr__(self, *args, **kwargs): # real signature unknown
100         """ Return repr(self). """
101         pass
102 
103     buffer = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
104 
105     closed = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
106 
107     encoding = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
108 
109     errors = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
110 
111     line_buffering = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
112 
113     name = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
114 
115     newlines = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
116 
117     _CHUNK_SIZE = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default
118 
119     _finalizing = property(lambda self: object(), lambda self, v: None, lambda self: None)  # default

python3.0操作方式

六、文件的修改

# 修改文件五部曲
‘‘‘
1、将原文件读取到内存
2、创建一个新的文件
3、将原内容修改为新内容
4、将源文件删除
5、将新文件重命名为原文件
‘‘‘

方式一：将硬盘存放的该文件的内容全部加载到内存，在内存中是可以修改的，修改完毕后，再由内存覆盖到硬盘（word，vim，nodpad++等编辑器）

import os  # 调用系统模块

with open(‘a.txt‘) as read_f,open(‘.a.txt.swap‘,‘w‘) as write_f:
    data=read_f.read() #全部读入内存,如果文件很大,会很卡
    data=data.replace(‘alex‘,‘SB‘) #在内存中完成修改

    write_f.write(data) #一次性写入新文件

os.remove(‘a.txt‘)  #删除原文件
os.rename(‘.a.txt.swap‘,‘a.txt‘)   #将新建的文件重命名为原文件

View Code

方式二：将硬盘存放的该文件的内容一行一行地读入内存，修改完毕就写入新文件，最后用新文件覆盖源文件

import os

with open(‘a.txt‘) as read_f,open(‘.a.txt.swap‘,‘w‘) as write_f:
    for line in read_f:
        line=line.replace(‘alex‘,‘SB‘)
        write_f.write(line)

os.remove(‘a.txt‘)
os.rename(‘.a.txt.swap‘,‘a.txt‘) 

View Code

方法三：在原文件里对文件进行修改（即只打开一个需要修改的文件，不调用系统os文件做删除覆盖操作）

with open(‘test1‘,‘r+‘,encoding=‘utf-8‘) as f:
    date = f.read()
    new_date = date.replace(‘alex‘,‘SB‘)
    f.seek(0)
    f.truncate()
    f.write(new_date)

View Code