树莓派进阶之路 (038) - P2P 文件下载机

Posted 2020-11-03 极客先锋

硬件要求：

　　树莓派开发板

　　USB外接硬盘

一.　Together

1.　更新安装程序

sudosudo apt- apt-get update
get updat sudo apt-get upgrade
sudo apt-get install python-software-properties  //树莓派不用添加repo
sudo add-apt-repository ppa:deluge-team/ppa   //树莓派不用添加repo，直接执行下面两步

2.　安装Deuge：

sudo apt-get install deluge deluged deluge-web

3.　配置后台启动

sudo vim /etc/rc.local 　　//在文件中添加：nohup deluge-web --fork &

4.　登陆：（地址：http://树莓派ip地址:8112，默认密码deluge）

http://192.168.0.10:8112

二.　安装transmission

1.　安装transmission

sudo apt install transmission-daemon

2.　停止transmission

sudo /etc/init.d/transmission-daemon stop

3.　配置transmission

sudo vim /etc/transmission-daemon/settings.json

"rpc-password": "123",                    //主要是这行修改密码
"rpc-whitelist": "*",                        //主要是这行修改白名单

4.　启动transmission

sudo /etc/init.d/transmission-daemon start

5.　访问（访问地址：http://树莓派ip地址:9091，默认用户名transmission，可在settings.json修改）

http://192.168.0.10:9091

6.　安装transmission面板

wget https://github.com/ronggang/transmission-web-control/raw/master/release/tr-control-easy-install.sh
sudo bash tr-control-easy-install.sh

三.　Rtorrent

1.　安装rtorrent和irssi（直接用一键脚本）

sudo bash -c "$(wget --no-check-certificate -qO - https://raw.githubusercontent.com/arakasi72/rtinst/master/rtsetup)"
sudo rtinst --ssh-default --rutorrent-stable  //安装稳定版，ssh端口号不改变

2.　修改配置

sudo vim ~/.rtorrent.rc

3.　重启

rt restart

4.　更换版本

sudo rtupdate

5.　访问地址(http://树莓派ip地址/rutorrent/或https://树莓派ip地址/rutorrent/)

http://192.168.0.10/rutorrent/
或https://192.168.0.10/rutorrent/

6.　参考配置(由于树莓派性能一般，配置参考)

 1 throttle.global_down.max_rate.set = 0
 2 throttle.global_up.max_rate.set = 0
 3 throttle.max_downloads.global.set = 300
 4 throttle.max_uploads.global.set = 300
 5 throttle.min_peers.normal.set = 99
 6 throttle.max_peers.normal.set = 100
 7 throttle.min_peers.seed.set = -1
 8 throttle.max_peers.seed.set = -1
 9 throttle.max_downloads.set = 50
10 throttle.max_uploads.set = 50
11 trackers.numwant.set = 100
12 network.max_open_files.set = 600
13 network.max_open_sockets.set = 999
14 network.http.max_open.set = 99
15 pieces.memory.max.set = 800M
16 network.http.dns_cache_timeout.set = 25