VmWare扩展硬盘分区
Posted 一只小小寄居蟹
tags:
篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了VmWare扩展硬盘分区相关的知识,希望对你有一定的参考价值。
扩展硬盘
对硬盘进行分区
(1) 查看现有的硬盘分区情况 [mysql@china ~]$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_china-lv_root 18G 5.2G 12G 32% / tmpfs 931M 72K 931M 1% /dev/shm /dev/sda1 485M 39M 421M 9% /boot (2).对新增的硬盘空间做新增分区(硬盘数没有增加,增加的是空间) sudo fdisk /dev/sda 出现如下提示:Command (m for help): n 说明:新增分区 继续提示:Command action e extended p primary partition (1-4) p 说明:打印分区表 3 说明:Partition number (1-4):此时fdisk会让你选择主分区的编号,如果已经有了主分区sda1,sda2,那么编号就选3,即要创建的该分区为sda3. First cylinder (2611-16632, default 2611): 默认回车(最小) Using default value 2611 Last cylinder or +size or +sizeM or +sizeK (2611-16632, default 16632):默认回车(最大) Using default value 16632 Command (m for help): t 说明:修改分区类型 Partition number (1-4): 3 说明:修改分区类型对应的分区号 Hex code (type L to list codes): 8e说明:8e是lvm磁盘类型 Changed system type of partition 3 to 8e (Linux LVM) Command (m for help): p 说明:打印分区表 Command (m for help): w 说明:保存退出 The partition table has been altered! (3)重新启动系统 reboot (4) 输入一下命令 sudo fdisk -l /dev/sda (5).执行 sudo pvcreate /dev/sda3 为这个新分区创建一个物理卷Volume; (6).现在要做的是把物理卷(volume)扩展到新的物理卷上,先执行命令 sudo vgdisplay 来查看已有的系统Volume Group的情况,输出如下: [root@china ~]# vgdisplay --- Volume group --- VG Name vg_china System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 19.51 GiB PE Size 4.00 MiB Total PE 4994 Alloc PE / Size 4994 / 19.51 GiB Free PE / Size 0 / 0 VG UUID SCI2oR-nhr6-89fG-AfDW-CzsM-HxqL-QpS3jr (7)执行命令 vgextend vg_china /dev/sda3 , 扩展以后的Volume Group到新的物理磁盘卷Volume上。 (8)下一步是扩展逻辑卷(Logic Volume)到新的卷上,先用命令 vgdisplay 看看目前已有的逻辑卷(Logic Volume)的情况 [root@china ~]# vgdisplay --- Volume group --- VG Name vg_china System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 2 Act PV 2 VG Size 99.50 GiB PE Size 4.00 MiB Total PE 25473 Alloc PE / Size 4994 / 19.51 GiB Free PE / Size 20479 / 80.00 GiB VG UUID SCI2oR-nhr6-89fG-AfDW-CzsM-HxqL-QpS3jr (9)执行命令 扩展逻辑分区 [root@china ~]# lvextend -L +79.99G /dev/vg_china/lv_root /dev/sda3 Rounding size to boundary between physical extents: 79.99 GiB Extending logical volume lv_root to 97.50 GiB Logical volume lv_root successfully resized (10)最后将文件系统resize到新的逻辑卷上来,执行命令 [root@china ~]# resize2fs /dev/vg_china/lv_root resize2fs 1.41.12 (17-May-2010) Filesystem at /dev/vg_china/lv_root is mounted on /; on-line resizing required old desc_blocks = 2, new_desc_blocks = 7 Performing an on-line resize of /dev/vg_china/lv_root to 25559040 (4k) blocks. The filesystem on /dev/vg_china/lv_root is now 25559040 blocks long. (11)用命令看到扩展的分区 [root@china ~]# fdisk -l /dev/sda Disk /dev/sda: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0007243f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 2611 20458496 8e Linux LVM /dev/sda3 2611 13054 83884735 8e Linux LVM [root@china ~]# df -hl Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_china-lv_root 96G 5.2G 86G 6% / tmpfs 931M 72K 931M 1% /dev/shm /dev/sda1 485M 39M 421M 9% /boot
以上是关于VmWare扩展硬盘分区的主要内容,如果未能解决你的问题,请参考以下文章