Docker跨主机通信网络

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了Docker跨主机通信网络相关的知识,希望对你有一定的参考价值。

Docker跨主机通信网络

跨主机网络方案包括:

docker原生的 overlaymacvlan
第三方方案:常用的包括flannel、weave 和 calico

(1)准备 Overlay 网络实验环境

[[email protected] ~]# docker run -d -p 8500:8500 -h consul --name consul progrium/consul -server -bootstrap
[[email protected] ~]# netstat -tulnp |grep 8500
tcp6       0      0 :::8500                 :::*                    LISTEN      61092/docker-proxy- 
容器启动后,可以通过 http://192.168.56.110:8500 访问 Consul。

技术分享图片

接下来修改 node1 和 node2 的 docker daemon 的配置文件/var/lib/systemd/system/docker.service。
--cluster-store 指定 consul 的地址。
--cluster-advertise 告知 consul 自己的连接地址。
[[email protected] ~]# cat /usr/lib/systemd/system/docker.service 
......
ExecStart=/usr/bin/dockerd-current           --add-runtime docker-runc=/usr/libexec/docker/docker-runc-current           --default-runtime=docker-runc           --exec-opt native.cgroupdriver=systemd           --userland-proxy-path=/usr/libexec/docker/docker-proxy-current           --seccomp-profile=/etc/docker/seccomp.json           --cluster-store=consul://192.168.56.110:8500           --cluster-advertise=eth0:2376           $OPTIONS ......
[[email protected] ~]# systemctl daemon-reload
[[email protected] ~]# systemctl restart docker
node1 和 node2 将自动注册到 Consul 数据库中。

技术分享图片

(2)创建 overlay 网络

在 node1 中创建 overlay 网络 ov_net1:
[[email protected] ~]# docker network create -d overlay ov_net1  #-d overlay 指定 driver 为 overaly。
[[email protected] ~]# docker network ls  #查看当前网络
NETWORK ID          NAME                DRIVER              SCOPE
8eb7fd71a52c        bridge              bridge              local
6ba20168e34f        host                host                local
4e896f9ac4bc        none                null                local
d9652d84d9de        ov_net1             overlay             global
[[email protected] ~]# docker network ls  #查看当前网络
NETWORK ID          NAME                DRIVER              SCOPE
94a3bc259414        bridge              bridge              local
f8443f6cb8d2        host                host                local
2535ab8f3493        none                null                local
d9652d84d9de        ov_net1             overlay             global

node2 上也能看到 ov_net1。这是因为创建 ov_net1 时 node1 将 overlay 网络信息存入了 consul,node2 从 consul 读取到了新网络的数据。之后 ov_net 的任何变化都会同步到 node1 和 node2。

[[email protected] ~]# docker network inspect ov_net1  #查看 ov_net1 的详细信息
[
    {
        "Name": "ov_net1",
        "Id": "d9652d84d9de6d1145c77d0254c90164b968f72f2eda4aee43d56ab03f8530ed",
        "Created": "2018-04-19T21:50:29.128801226+08:00",
        "Scope": "global",
        "Driver": "overlay",
        "EnableIPv6": false,
        "IPAM": {
            "Driver": "default",
            "Options": {},
            "Config": [
                {
                    "Subnet": "10.0.0.0/24",
                    "Gateway": "10.0.0.1"
                }
            ]
        },
        "Internal": false,
        "Attachable": false,
        "Containers": {},
        "Options": {},
        "Labels": {}
    }
]

(3) overlay 中运行容器

[[email protected] ~]# docker run -itd --name bbox1 --network ov_net1 busybox
340f748b06786c0f81c3e26dd9dbd820dafcdf73baa9232f02aece8d4c89a73b
[[email protected] ~]# docker exec bbox1 ip r  #查看容器的网络配置
default via 172.18.0.1 dev eth1 
10.0.0.0/24 dev eth0 scope link  src 10.0.0.2 
172.18.0.0/16 dev eth1 scope link  src 172.18.0.2 

bbox1有两个网络接口eth0eth1eth0 IP10.0.0.2,连接的是 overlay 网络ov_net1eth1 IP 172.18.0.2,容器的默认路由是走 eth1eth1是哪儿来的呢?

其实,docker会创建一个bridge网络 “docker_gwbridge”,为所有连接到 overlay 网络的容器提供访问外网的能力。

[[email protected] ~]# docker network ls
NETWORK ID          NAME                DRIVER              SCOPE
8eb7fd71a52c        bridge              bridge              local
751bd423a345        docker_gwbridge     bridge              local
6ba20168e34f        host                host                local
4e896f9ac4bc        none                null                local
d9652d84d9de        ov_net1             overlay             global
[[email protected] ~]# docker network inspect docker_gwbridge 
[
    {
        "Name": "docker_gwbridge",
        "Id": "751bd423a345a7beaa6b4cbf2a69a7687e3d8b7e656952090c4b94aec54ec1b5",
        "Created": "2018-04-21T16:11:57.684140362+08:00",
        "Scope": "local",
        "Driver": "bridge",
        "EnableIPv6": false,
        "IPAM": {
            "Driver": "default",
            "Options": null,
            "Config": [
                {
                    "Subnet": "172.18.0.0/16",
                    "Gateway": "172.18.0.1"
                }
            ]
        },
        "Internal": false,
        "Attachable": false,
        "Containers": {
            "340f748b06786c0f81c3e26dd9dbd820dafcdf73baa9232f02aece8d4c89a73b": {
                "Name": "gateway_340f748b0678",
                "EndpointID": "64cd599aaa2408ca0a1e595264e727b09d26482ba4d2aa18d97862ed29e23b51",
                "MacAddress": "02:42:ac:12:00:02",
                "IPv4Address": "172.18.0.2/16",
                "IPv6Address": ""
            }
        },
        "Options": {
            "com.docker.network.bridge.enable_icc": "false",
            "com.docker.network.bridge.enable_ip_masquerade": "true",
            "com.docker.network.bridge.name": "docker_gwbridge"
        },
        "Labels": {}
    }
]

docker network inspect docker_gwbridge输出可确认 docker_gwbridge的 IP 地址范围是 172.18.0.0/16,当前连接的容器就是bbox1(172.18.0.2)
而且此网络的网关就是网桥 docker_gwbridgeIP 172.17.0.1

[[email protected] ~]# ifconfig docker_gwbridge 
docker_gwbridge: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.18.0.1  netmask 255.255.0.0  broadcast 0.0.0.0
        inet6 fe80::42:e4ff:feb8:22cb  prefixlen 64  scopeid 0x20<link>
        ether 02:42:e4:b8:22:cb  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

这样容器 bbox1 就可以通过 docker_gwbridge 访问外网。

[[email protected] ~]# docker exec bbox1 ping -c 2 www.baidu.com
PING www.baidu.com (58.217.200.112): 56 data bytes
64 bytes from 58.217.200.112: seq=0 ttl=127 time=32.465 ms
64 bytes from 58.217.200.112: seq=1 ttl=127 time=32.754 ms

--- www.baidu.com ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 32.465/32.609/32.754 ms

(4)overlay 如何实现跨主机通信?

[[email protected] ~]# docker run -itd --name bbox2 --network ov_net1 busybox
[[email protected] ~]# docker ps
CONTAINER ID      IMAGE     COMMAND        CREATED       STATUS      PORTS       NAMES
68c81b90fb86     busybox    "sh"        2 days ago      Up 2 days                bbox2
[[email protected] ~]# docker exec bbox2 ip r
default via 172.18.0.1 dev eth1 
10.0.0.0/24 dev eth0 scope link  src 10.0.0.3   
172.18.0.0/16 dev eth1 scope link  src 172.18.0.2 

##bbox2 IP 为 10.0.0.3,可以直接 ping bbox1
[[email protected] ~]# docker exec bbox2 ping -c 3 bbox1
PING bbox1 (10.0.0.2): 56 data bytes
64 bytes from 10.0.0.2: seq=0 ttl=64 time=154.064 ms
64 bytes from 10.0.0.2: seq=1 ttl=64 time=0.789 ms
64 bytes from 10.0.0.2: seq=2 ttl=64 time=0.539 ms

--- bbox1 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.539/51.797/154.064 ms

docker会为每个overlay网络创建一个独立的network namespace,其中会有一个linux bridge br0endpoint 还是由veth pair 实现,一端连接到容器中(即 eth0),另一端连接到 namespacebr0上。

br0除了连接所有的 endpoint,还会连接一个 vxlan 设备,用于与其他 host建立 vxlan tunnel。容器之间的数据就是通过这个tunnel通信的。逻辑网络拓扑结构如图所示:

技术分享图片

(5)overlay 是如何隔离的?

不同的overlay网络是相互隔离的。我们创建第二个 overlay网络ov_net2 并运行容器bbox3

[[email protected] ~]# docker run -itd --name bbox3 --network ov_net2 busybox
946def609a7b183f68b8398b35fd3f72dc28bff47cc2ba63467f266fde297d5a

[[email protected] ~]# docker exec -it bbox3 ip r
default via 172.18.0.1 dev eth1 
10.0.1.0/24 dev eth0 scope link  src 10.0.1.2   ##bbox3的ip为10.0.1.2
172.18.0.0/16 dev eth1 scope link  src 172.18.0.4 

[[email protected] ~]# docker exec -it bbox3 ping -c 2 10.0.0.3  #bbox3无法ping通bbox2
PING 10.0.0.3 (10.0.0.3): 56 data bytes
^C
--- 10.0.0.3 ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss

如果要实现 bbox3 与 bbox2 通信,可以将 bbox3 也连接到 ov_net1。
[[email protected] ~]# docker network connect ov_net1 bbox3
[[email protected] ~]# docker exec -it bbox3 ping -c 2 10.0.0.3
PING 10.0.0.3 (10.0.0.3): 56 data bytes
64 bytes from 10.0.0.3: seq=0 ttl=64 time=34.110 ms
64 bytes from 10.0.0.3: seq=1 ttl=64 time=0.745 ms

--- 10.0.0.3 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.745/17.427/34.110 ms

docker默认为 overlay网络分配 24 位掩码的子网(10.0.X.0/24),所有主机共享这个 subnet,容器启动时会顺序从此空间分配 IP。当然我们也可以通过--subnet 指定 IP 空间。

[[email protected] ~]# docker network create -d overlay --subnet 10.22.1.0/24 ov_net3a111191fa67e500015a2f3ab8166793d23f0adef4d66bfcee81166127915ff9f
[[email protected] ~]# docker network ls
NETWORK ID          NAME                DRIVER              SCOPE
8eb7fd71a52c        bridge              bridge              local
751bd423a345        docker_gwbridge     bridge              local
6ba20168e34f        host                host                local
4e896f9ac4bc        none                null                local
d9652d84d9de        ov_net1             overlay             global
667cc7ef7427        ov_net2             overlay             global
a111191fa67e        ov_net3             overlay             global

以上是关于Docker跨主机通信网络的主要内容,如果未能解决你的问题,请参考以下文章

Docker-----网络自定义网络容器通信跨主机容器通信

Docker容器跨主机通信之:直接路由方式

docker容器跨主机网络overlay

精讲docker跨主机通信

Docker容器跨主机多网段通信解决方案

利用etcd实现docker跨主机通信