Many areas of Computer Science use simple, abstract domains for both analytical and empirical studies. For example, an early AI study of planning and robotics (STRIPS) used a block world in which a robot arm performed tasks involving the manipulation of blocks.
In this problem you will model a simple block world under certain rules and constraints. Rather than determine how to achieve a specified state, you will ``program’‘ a robotic arm to respond to a limited set of commands.
The problem is to parse a series of commands that instruct a robot arm in how to manipulate blocks that lie on a flat table. Initially there are n blocks on the table (numbered from 0 to n-1) with block bi adjacent to block bi+1 for all 0<=i<n-1 as shown in the diagram below:
Figure: Initial Blocks World
The valid commands for the robot arm that manipulates blocks are:
move a onto b
where a and b are block numbers, puts block a onto block b after returning any blocks that are stacked on top of blocks a and b to their initial positions.
move a over b
where a and b are block numbers, puts block a onto the top of the stack containing block b, after returning any blocks that are stacked on top of block a to their initial positions.
pile a onto b
where a and b are block numbers, moves the pile of blocks consisting of block a, and any blocks that are stacked above block a, onto block b. All blocks on top of block b are moved to their initial positions prior to the pile taking place. The blocks stacked above block a retain their order when moved.
pile a over b
where a and b are block numbers, puts the pile of blocks consisting of block a, and any blocks that are stacked above block a, onto the top of the stack containing block b. The blocks stacked above block a retain their original order when moved.
quit
terminates manipulations in the block world.
Any command in which a = b or in which a and b are in the same stack of blocks is an illegal command. All illegal commands should be ignored and should have no affect on the configuration of blocks.
Input
The input begins with an integer n on a line by itself representing the number of blocks in the block world. You may assume that 0 < n < 25.
The number of blocks is followed by a sequence of block commands, one command per line. Your program should process all commands until the quit command is encountered.
You may assume that all commands will be of the form specified above. There will be no syntactically incorrect commands.
Output
The output should consist of the final state of the blocks world. Each original block position numbered i ( 0<=i<n-1 where n is the number of blocks) should appear followed immediately by a colon. If there is at least a block on it, the colon must be followed by one space, followed by a list of blocks that appear stacked in that position with each block number separated from other block numbers by a space. Don’t put any trailing spaces on a line.
There should be one line of output for each block position (i.e., n lines of output where n is the integer on the first line of input).
Examples
10
move 9 onto 1
move 8 over 1
move 7 over 1
move 6 over 1
pile 8 over 6
pile 8 over 5
move 2 over 1
move 4 over 9
quit
0: 0
1: 1 9 2 4
2:
3: 3
4:
5: 5 8 7 6
6:
7:
8:
9:
1 #include <iostream> 2 #include <cstdio> 3 #include <vector> 4 #define MAXN 25 5 using namespace std; 6 int n; 7 vector<int> blocks[MAXN]; 8 void findb(int x,int& p,int& h){ 9 for(p=0;p<n;p++) 10 for(h=0;h<blocks[p].size();h++){ 11 if(x==blocks[p][h]) return; 12 } 13 } 14 void clear_above(int p,int h){ 15 for(int i=h+1;i<blocks[p].size();i++){ 16 int tmp=blocks[p][i]; 17 blocks[tmp].push_back(tmp); 18 } 19 blocks[p].resize(h+1); 20 } 21 void pile_over(int pa,int ha,int pb){ 22 for(int i=ha;i<blocks[pa].size();i++){ 23 int tmp=blocks[pa][i]; 24 blocks[pb].push_back(tmp); 25 } 26 blocks[pa].resize(ha); 27 } 28 int main() 29 { 30 cin>>n; 31 for(int i=0;i<n;i++) blocks[i].push_back(i); 32 int a,b;string s1,s2; 33 while(cin>>s1&&s1!="quit"){ 34 cin>>a>>s2>>b; 35 36 int pa,pb,ha,hb; 37 findb(a,pa,ha); 38 findb(b,pb,hb); 39 if(pa==pb) continue; 40 if(s1=="move") clear_above(pa,ha); 41 if(s2=="onto") clear_above(pb,hb); 42 pile_over(pa,ha,pb); 43 44 } 45 for(int i=0;i<n;i++){ 46 printf("%d:",i); 47 for(int j=0;j<blocks[i].size();j++) 48 printf(" %d",blocks[i][j]); 49 printf("\n"); 50 } 51 return 0; 52 }
翻译一下:用vector来实现我啊(误
紫书STL入门章节经典题，来自UVaOJ。给定木块数量，进行四种操作，结束后输出。
此题数据结构的核心时vector<int> blocks[MAXN]，所有的操作围绕其进行。vector就像一个二位数组，，只是第一维的大小是固定的(不超过MAXN)，但第二维的大小不固定......输入共有4中指令......更好的方法是提取指令之间的共同点，编写函数以减少重复代码。