ZooKeeper Commands: The Four Letter Words 获取监控状态

Posted 2020-10-20

ZooKeeper responds to a small set of commands. Each command is composed of four letters. You issue the commands to ZooKeeper via telnet or nc, at the client port. Three of the more interesting commands: "stat" gives some general information about the server and connected clients, while "srvr" and "cons" give extended details on server and connections respectively. conf New in 3.3.0: Print details about serving configuration. cons New in 3.3.0: List full connection/session details for all clients connected to this server. Includes information on numbers of packets received/sent, session id, operation latencies, last operation performed, etc... crst New in 3.3.0: Reset connection/session statistics for all connections. dump Lists the outstanding sessions and ephemeral nodes. This only works on the leader. envi Print details about serving environment ruok Tests if server is running in a non-error state. The server will respond with imok if it is running. Otherwise it will not respond at all. A response of "imok" does not necessarily indicate that the server has joined the quorum, just that the server process is active and bound to the specified client port. Use "stat" for details on state wrt quorum and client connection information. srst Reset server statistics. srvr New in 3.3.0: Lists full details for the server. stat Lists brief details for the server and connected clients. wchs New in 3.3.0: Lists brief information on watches for the server. wchc New in 3.3.0: Lists detailed information on watches for the server, by session. This outputs a list of sessions(connections) with associated watches (paths). Note, depending on the number of watches this operation may be expensive (ie impact server performance), use it carefully. wchp New in 3.3.0: Lists detailed information on watches for the server, by path. This outputs a list of paths (znodes) with associated sessions. Note, depending on the number of watches this operation may be expensive (ie impact server performance), use it carefully. mntr New in 3.4.0: Outputs a list of variables that could be used for monitoring the health of the cluster. $ echo mntr | nc localhost 2185 zk_version 3.4.0 zk_avg_latency 0 zk_max_latency 0 zk_min_latency 0 zk_packets_received 70 zk_packets_sent 69 zk_outstanding_requests 0 zk_server_state leader zk_znode_count 4 zk_watch_count 0 zk_ephemerals_count 0 zk_approximate_data_size 27 zk_followers 4 - only exposed by the Leader zk_synced_followers 4 - only exposed by the Leader zk_pending_syncs 0 - only exposed by the Leader zk_open_file_descriptor_count 23 - only available on Unix platforms zk_max_file_descriptor_count 1024 - only available on Unix platforms The output is compatible with java properties format and the content may change over time (new keys added). Your scripts should expect changes. ATTENTION: Some of the keys are platform specific and some of the keys are only exported by the Leader. The output contains multiple lines with the following format: key \t value Here‘s an example of the ruok command: $ echo ruok | nc 127.0.0.1 5111 imok

官网zookeeper参考手册：http://zookeeper.apache.org/doc/r3.4.10/zookeeperAdmin.html#sc_minimumConfiguration

conf:
clientPort:客户端端口号 
dataDir：数据文件目录
dataLogDir：日志文件目录  
tickTime：间隔单位时间
maxClientCnxns：最大连接数  
minSessionTimeout：最小session超时
maxSessionTimeout：最大session超时  
serverId：id  
initLimit：初始化时间  
syncLimit：心跳时间间隔  
electionAlg：选举算法 默认3  
electionPort：选举端口  
quorumPort：法人端口  
peerType：未确认


cons：
ip=ip
port=端口
queued=所在队列
received=收包数
sent=发包数
sid=session id
lop=最后操作
est=连接时间戳
to=超时时间
lcxid=最后id(未确认具体id)
lzxid=最后id(状态变更id)
lresp=最后响应时间戳
llat=最后/最新 延时
minlat=最小延时
maxlat=最大延时
avglat=平均延时




crst:
重置所有连接




dump:
session id : znode path  (1对多   ,  处于队列中排队的session和临时节点)




envi:
zookeeper.version=版本
host.name=host信息
java.version=java版本
java.vendor=供应商
java.home=jdk目录
java.class.path=classpath
java.library.path=lib path
java.io.tmpdir=temp目录
java.compiler=<NA>
os.name=Linux
os.arch=amd64
os.version=2.6.32-358.el6.x86_64
user.name=hhz
user.home=/home/hhz
user.dir=/export/servers/zookeeper-3.4.6




ruok:
查看server是否正常
imok=正常




srst:
重置server状态




srvr：
Zookeeper version:版本
Latency min/avg/max: 延时
Received: 收包
Sent: 发包
Connections: 连接数
Outstanding: 堆积数
Zxid: 操作id
Mode: leader/follower
Node count: 节点数


stat：
Zookeeper version: 3.4.6-1569965, built on 02/20/2014 09:09 GMT
Clients:
 /192.168.147.102:56168[1](queued=0,recved=41,sent=41)
 /192.168.144.102:34378[1](queued=0,recved=54,sent=54)
 /192.168.162.16:43108[1](queued=0,recved=40,sent=40)
 /192.168.144.107:39948[1](queued=0,recved=1421,sent=1421)
 /192.168.162.16:43112[1](queued=0,recved=54,sent=54)
 /192.168.162.16:43107[1](queued=0,recved=54,sent=54)
 /192.168.162.16:43110[1](queued=0,recved=53,sent=53)
 /192.168.144.98:34702[1](queued=0,recved=41,sent=41)
 /192.168.144.98:34135[1](queued=0,recved=61,sent=65)
 /192.168.162.16:43109[1](queued=0,recved=54,sent=54)
 /192.168.147.102:56038[1](queued=0,recved=165313,sent=165314)
 /192.168.147.102:56039[1](queued=0,recved=165526,sent=165527)
 /192.168.147.101:44124[1](queued=0,recved=162811,sent=162812)
 /192.168.147.102:39271[1](queued=0,recved=41,sent=41)
 /192.168.144.107:45476[1](queued=0,recved=166422,sent=166423)
 /192.168.144.103:45100[1](queued=0,recved=54,sent=54)
 /192.168.162.16:43133[0](queued=0,recved=1,sent=0)
 /192.168.144.107:39945[1](queued=0,recved=1825,sent=1825)
 /192.168.144.107:39919[1](queued=0,recved=325,sent=325)
 /192.168.144.106:47163[1](queued=0,recved=17891,sent=17891)
 /192.168.144.107:45488[1](queued=0,recved=166554,sent=166555)
 /172.17.36.11:32728[1](queued=0,recved=54,sent=54)
 /192.168.162.16:43115[1](queued=0,recved=54,sent=54)


Latency min/avg/max: 0/0/599
Received: 224869
Sent: 224817
Connections: 23
Outstanding: 0
Zxid: 0x68000af707
Mode: follower
Node count: 101081


（同上面的命令整合的信息）




wchs:
connectsions=连接数
watch-paths=watch节点数
watchers=watcher数量




wchc:
session id 对应 path


wchp:
path 对应 session id


mntr:
zk_version=版本
zk_avg_latency=平均延时
zk_max_latency=最大延时
zk_min_latency=最小延时
zk_packets_received=收包数  
zk_packets_sent=发包数
zk_num_alive_connections=连接数
zk_outstanding_requests=堆积请求数
zk_server_state=leader/follower 状态
zk_znode_count=znode数量
zk_watch_count=watch数量
zk_ephemerals_count=临时节点（znode）
zk_approximate_data_size=数据大小
zk_open_file_descriptor_count=打开的文件描述符数量
zk_max_file_descriptor_count=最大文件描述符数量
zk_followers=follower数量
zk_synced_followers=同步的follower数量
zk_pending_syncs=准备同步数