kubeadm部署k8s1.9高可用集群--4部署master节点

Posted 天师符

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了kubeadm部署k8s1.9高可用集群--4部署master节点相关的知识,希望对你有一定的参考价值。

部署master节点

kubernetes master 节点包含的组件:

  • kube-apiserver
  • kube-scheduler
  • kube-controller-manager

本文档介绍部署一个三节点高可用 master 集群的步骤,分别命名为k8s-host1k8s-host2k8s-host3

  • k8s-host1:172.16.120.154
  • k8s-host2:172.16.120.155
  • k8s-host3:172.16.120.156

安装docker

在每台主机安装docker。建议使用docker v1.12 , 但是 v1.11, v1.13 and 17.03 也可以正常工作. 版本 17.06+ 可能工作, 但是没有被k8s团队测试过。
PS:kubelet设置的cgroup driver应该和Docker设置的cgroup driver一致。这边统一为systemd。

yum install -y docker
systemctl enable docker && systemctl start docker

安装kubeadm, kubelet 和 kubectl

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
EOF
setenforce 0
yum install -y kubelet kubeadm kubectl
systemctl enable kubelet && systemctl start kubelet
  • 通过运行命令setenforce 0 禁用selinux,主要为了允许容器可以访问主机文件系统和pod networks的需要。
  • Some users on RHEL/CentOS 7 have reported issues with traffic being routed incorrectly due to iptables being bypassed。所以需要执行下面命令:
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system

安装master

kubeadm init

kubeadm init --apiserver-advertise-address=172.16.120.200 --pod-network-cidr=192.168.0.0/16
  • apiserver-advertise-address该参数一般指定为haproxy+keepalived 的vip。
  • pod-network-cidr 主要是在搭建pod network(calico)时候需要在init时候指定。

出现如下错误:

[[email protected] ~]# kubeadm init --apiserver-advertise-address=172.16.120.200 --pod-network-cidr=192.168.0.0/16

[init] Using Kubernetes version: v1.9.0
[init] Using Authorization modes: [Node RBAC]
[preflight] Running pre-flight checks.
        [WARNING FileExisting-crictl]: crictl not found in system path
[preflight] Some fatal errors occurred:
        [ERROR Swap]: running with swap on is not supported. Please disable swap
[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`

解决办法:
1:kubelet启动参数增加--fail-swap-on=false

[Service]
Environment="KUBELET_KUBECONFIG_ARGS=--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf"
Environment="KUBELET_SYSTEM_PODS_ARGS=--pod-manifest-path=/etc/kubernetes/manifests --allow-privileged=true"
Environment="KUBELET_NETWORK_ARGS=--network-plugin=cni --cni-conf-dir=/etc/cni/net.d --cni-bin-dir=/opt/cni/bin"
Environment="KUBELET_DNS_ARGS=--cluster-dns=10.96.0.10 --cluster-domain=cluster.local"
Environment="KUBELET_AUTHZ_ARGS=--authorization-mode=Webhook --client-ca-file=/etc/kubernetes/pki/ca.crt"
Environment="KUBELET_CADVISOR_ARGS=--cadvisor-port=0"
Environment="KUBELET_CGROUP_ARGS=--cgroup-driver=systemd"
Environment="KUBELET_CERTIFICATE_ARGS=--rotate-certificates=true --cert-dir=/var/lib/kubelet/pki"
Environment="KUBELET_SWAP_ARGS=--fail-swap-on=false"
ExecStart=
ExecStart=/usr/bin/kubelet $KUBELET_KUBECONFIG_ARGS $KUBELET_SYSTEM_PODS_ARGS $KUBELET_NETWORK_ARGS $KUBELET_DNS_ARGS $KUBELET_AUTHZ_ARGS $KUBELET_CADVISOR_ARGS $KUBELET_CGROUP_ARGS $KUBELET_CERTIFICATE_ARGS $KUBELET_EXTRA_ARGS $KUBELET_SWAP_ARGS

2:kubeadm init 参数增加ignore-preflight-errors

 kubeadm init --apiserver-advertise-address=172.16.120.200  --pod-network-cidr=192.168.0.0/16 www.bajieyy.org--ignore-preflight-errors ‘Swap‘

3:在物理机上可能并不会出现该问题。

最终安装成功

[[email protected] manifests]# kubeadm init --apiserver-advertise-address=172.16.120.200  --pod-network-cidr=192.168.0.0/16 --ignore-preflight-errors ‘Swap‘
[init] Using Kubernetes version: v1.9.0
[init] Using Authorization modes: [Node RBAC]
[preflight] Running pre-flight checks.
        [WARNING Swap]: running with swap on is not supported. Please disable swap
        [WARNING FileExisting-crictl]: crictl not found in system path
[preflight] Starting the kubelet service
[certificates] Generated ca certificate and key.
[certificates] Generated apiserver certificate and key.
[certificates] apiserver serving cert is signed for DNS names [k8s-host1 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.16.120.200]
[certificates] Generated apiserver-kubelet-client certificate and key.
[certificates] Generated sa key and public key.
[certificates] Generated front-proxy-ca certificate and key.
[certificates] Generated front-proxy-client certificate and key.
[certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "scheduler.conf"
[controlplane] Wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[controlplane] Wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[controlplane] Wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml"
[init] Waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests".
[init] This might take a minute or longer if the control plane images have to be pulled.
[apiclient] All control plane components are healthy after 30.002346 seconds
[uploadconfig] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[markmaster] Will mark node k8s-host1 as master by adding a label and a taint
[markmaster] Master k8s-host1 tainted and labelled with key/value: node-role.kubernetes.io/master=""
[bootstraptoken] Using token: 26ea24.cb987cb5cf6f29a6
[bootstraptoken] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: kube-dns
[addons] Applied essential addon: kube-proxy

Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of machines by running the following on each node
as root:

  kubeadm join www.dijiuyy.com--token 26ea24.cb987cb5cf6f29a6 172.16.120.200:6443 --discovery-token-ca-cert-hash sha256:a2d5e0391695bb122d4a43dc951f93934a2aaa1360e00556401a49ea0ec2bdab



PS 需要记下 kubeadm join --token 26ea24.cb987cb5cf6f29a6 172.16.120.200:6443 --discovery-token-ca-cert-hash sha256:a2d5e0391695bb122d4a43dc951f93934a2aaa1360e00556401a49ea0ec2bdab,便于以后node加入到k8s集群中。

将kube-apiserver指向上一节部署的etcd集群

首先需要将上节生成的etcd ca等证书cp到mater主机的/etc/etcd/ssl/下

默认kubeadm安装了一个etcd节点,非集群,非加密,所以我们必须对kube-apiserver.yaml做修改。
修改后的kube-apiserver.yaml:

apiVersion: v1
kind: Pod
metadata:
  annotations:
    scheduler.alpha.kubernetes.io/critical-pod: ""
  labels:
    component: kube-apiserver
    tier: control-plane
  name: kube-apiserver
  namespace: kube-system
spec:
  containers:
  - command:
    - kube-apiserver
    - --allow-privileged=true
    - --requestheader-username-headers=X-Remote-User
    - --requestheader-group-headers=X-Remote-Group
    - --requestheader-extra-headers-prefix=X-Remote-Extra-
    - --service-cluster-ip-range=10.96.0.0/12
    - --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.crt
    - --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client.key
    - --enable-bootstrap-token-auth=true
    - --service-account-key-file=/etc/kubernetes/pki/sa.pub
    - --tls-cert-file=/etc/kubernetes/pki/apiserver.crt
    - --kubelet-client-certificate=/etc/kubernetes/pki/apiserver-kubelet-client.crt
    - --kubelet-client-key=/etc/kubernetes/pki/apiserver-kubelet-client.key
    - --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.crt
    - --insecure-port=0
    - --admission-control=Initializers,NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota
    - --requestheader-allowed-names=front-proxy-client
    - --advertise-address=172.16.120.200
    - --client-ca-file=/etc/kubernetes/pki/ca.crt
    - --secure-port=6443
    - --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname
    - --tls-private-key-file=/etc/kubernetes/pki/apiserver.key
    - --authorization-mode=Node,RBAC
    - --etcd-servers=https://172.16.120.151:2379,https://172.16.120.152:2379,https://172.16.120.153:2379
    - --etcd-cafile=/etc/etcd/ssl/ca.pem
    - --etcd-certfile=/etc/etcd/ssl/etcd.pem
    - --etcd-keyfile=/etc/etcd/ssl/etcd-key.pem
    image: gcr.io/google_containers/kube-apiserver-amd64:v1.9.0
    livenessProbe:
      failureThreshold: 8
      httpGet:
        host: 172.16.120.200
        path: /healthz
        port: 6443
        scheme: HTTPS
      initialDelaySeconds: 15
      timeoutSeconds: 15
    name: kube-apiserver
    resources:
      requests:
        cpu: 250m
    volumeMounts:
    - mountPath: /etc/kubernetes/pki
      name: k8s-certs
      readOnly: true
    - mountPath: /etc/ssl/certs
      name: ca-certs
      readOnly: true
    - mountPath: /etc/pki
      name: ca-certs-etc-pki
      readOnly: true
    - mountPath: /etc/etcd/ssl
      name: ca-certs-etc-etcd-ssl
      readOnly: true
  hostNetwork: true
  volumes:
  - hostPath:
      path: /etc/kubernetes/pki
      type: DirectoryOrCreate
    name: k8s-certs
  - hostPath:
      path: /etc/ssl/certs
      type: DirectoryOrCreate
    name: ca-certs
  - hostPath:
      path: /etc/pki
      type: DirectoryOrCreate
    name: ca-certs-etc-pki
  - hostPath:
      path: /etc/etcd/ssl
      type: DirectoryOrCreate
    name: ca-certs-etc-etcd-ssl
status: {}

注意添加了以下四项:

--etcd-cafile=/etc/etcd/ssl/ca.pem  
--etcd-certfile=/etc/etcd/ssl/etcd.pem  
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem    
--etcd-servers=https://172.16.120.151:2379,https://172.16.120.152:2379,https://172.16.120.153:2379
# 以及挂载
 - mountPath: /etc/etcd/ssl
      name: ca-certs-etc-etcd-ssl
      readOnly: true
      
 - hostPath:
      path: /etc/etcd/ssl
      type: DirectoryOrCreate
    name: ca-certs-etc-etcd-ssl   

确认第一台master三大组件都成功启动

kubectl get componentstatuses
NAME                 STATUS    MESSAGE              ERROR
controller-manager   Healthy   ok
scheduler            Healthy   ok
etcd-1               Healthy   {"health": "true"}
etcd-0               Healthy   {"health": "true"}
etcd-2               Healthy   {"health": "true"}

安装其他主机

我一般的做法是,依旧使用kubeadm init --apiserver-advertise-address=172.16.120.200 --pod-network-cidr=192.168.0.0/16 --ignore-preflight-errors ‘Swap‘
主要目的是下载k8s相关组件docker镜像等,其实就是让kubeadm把容易忽略的工作都做了。

然后将第一台/etc/kubernetes/下所有文件拷贝到其他master主机对应目录下,直至其他机器master三大组件启动成功。

至此一个完整的master高可用集群搭建完毕。

以上是关于kubeadm部署k8s1.9高可用集群--4部署master节点的主要内容,如果未能解决你的问题,请参考以下文章

k8s kubeadm部署高可用集群

k8s/kubeadm 生产环境高可用集群部署

使用kubeadm搭建高可用的K8S集群(2022年1月亲测有效)

再探使用kubeadm部署高可用的k8s集群-01引言

使用kube-vip部署高可用K8S集群

部署高可用k8s集群-kubeadm