epoll完整例子

Posted 2020-07-03 wywdahai

#include <deque>
#include <map>
#include <vector>
#include <pthread.h>
#include <semaphore.h>
#include <time.h>
#include <sys/time.h>
#include <sys/shm.h>
#include <errno.h>
#include <sys/types.h>
#include <fcntl.h>
#include <stdio.h>

#include <string>
#include <cstdio>
#include <unistd.h>
#include <signal.h>
#include <sys/types.h>
#include <sys/stat.h>

#include <cstdlib>
#include <cctype>
#include <sstream>
#include <utility>
#include <stdexcept>

#include <sys/socket.h> 
#include <sys/epoll.h> 
#include <netinet/in.h> 
#include <arpa/inet.h> 
#include <iostream>
#include <signal.h>

using namespace std;

#pragma pack(1)

//管道消息结构
struct pipemsg {
    int op;
    int fd;
    unsigned int ip;
    unsigned short port;
};

//地址端口结构
struct ipport {
    unsigned int ip;
    unsigned short port;
    bool operator < (const ipport rhs) const {return (ip < rhs.ip || (ip == rhs.ip && port < rhs.port));}
    bool operator == (const ipport rhs) const {return (ip == rhs.ip && port == rhs.port);}
};

//对应于对方地址端口的连接信息
struct peerinfo {
    int fd;                    //对应连接句柄
    unsigned int contime;    //最后连接时间
    unsigned int rcvtime;    //收到数据时间
    unsigned int rcvbyte;    //收到字节个数
    unsigned int sndtime;    //发送数据时间
    unsigned int sndbyte;    //发送字节个数
};

//连接结构
struct conninfo {
    int rfd;                                    //管道读端
    int wfd;                                    //管道写端
    map<struct ipport, struct peerinfo> peer;    //对方信息
};

#pragma pack()

//全局运行标志
bool g_bRun;

//全局连接信息
struct conninfo g_ConnInfo;

void setnonblocking(int sock) 
{     
    int opts;     
    opts = fcntl(sock,F_GETFL);     
    if (opts < 0)     
    {         
        perror("fcntl(sock,GETFL)");         
        exit(1);     
    }     
    opts = opts|O_NONBLOCK;     
    if (fcntl(sock, F_SETFL, opts) < 0)     
    {         
        perror("fcntl(sock,SETFL,opts)");         
        exit(1);     
    }  
}

void setreuseaddr(int sock)
{
    int opt;
    opt = 1;    
    if (setsockopt(sock,SOL_SOCKET,SO_REUSEADDR,&opt,sizeof(&opt)) < 0)     
    {         
        perror("setsockopt");         
        exit(1);     
    }  
}

static void sig_pro(int signum)
{
    cout << "sig_pro, recv signal:" << signum << endl;
    
    if (signum == SIGQUIT)
    {
        g_bRun = false;
    }
}

//接收连接线程
void * AcceptThread(void *arg)
{
    cout << "AcceptThread, enter" << endl;
    
    int ret;        //临时变量,存放返回值
    int epfd;        //监听用的epoll
    int listenfd;   //监听socket
    int connfd;        //接收到的连接socket临时变量
    int i;            //临时变量,轮询数组用
    int nfds;        //临时变量,有多少个socket有事件
     
    struct epoll_event ev;                     //事件临时变量
    const int MAXEVENTS = 1024;                //最大事件数
    struct epoll_event events[MAXEVENTS];    //监听事件数组
    socklen_t clilen;                         //声明epoll_event结构体的变量,ev用于注册事件,数组用于回传要处理的事件 
    struct sockaddr_in cliaddr;     
    struct sockaddr_in svraddr;
    
    unsigned short uListenPort = 5000;
    int iBacklogSize = 5;
    int iBackStoreSize = 1024;
    
    struct pipemsg msg;                        //消息队列数据
    
    //创建epoll,对2.6.8以后的版本,其参数无效,只要大于0的数值就行,内核自己动态分配
    epfd = epoll_create(iBackStoreSize);
    if (epfd < 0)
    {
        cout << "AcceptThread, epoll_create fail:" << epfd << ",errno:" << errno << endl;
        
        return NULL;
    }
    
    //创建监听socket
    listenfd = socket(AF_INET, SOCK_STREAM, 0);
    if (listenfd < 0)
    {
        cout << "AcceptThread, socket fail:" << epfd << ",errno:" << errno << endl;
        
        close(epfd);
        
        return NULL;
    }
       
    //把监听socket设置为非阻塞方式     
    setnonblocking(listenfd);
    //设置监听socket为端口重用 
    setreuseaddr(listenfd);
      
    //设置与要处理的事件相关的文件描述符     
    ev.data.fd = listenfd;     
    //设置要处理的事件类型     
    ev.events = EPOLLIN|EPOLLET;        
    //注册epoll事件   
    ret = epoll_ctl(epfd, EPOLL_CTL_ADD, listenfd, &ev);
    if (ret != 0)
    {
        cout << "AcceptThread, epoll_ctl fail:" << ret << ",errno:" << errno << endl;
        
        close(listenfd);
        close(epfd);
        
        return NULL;
    }   
 
    bzero(&svraddr, sizeof(svraddr));     
    svraddr.sin_family = AF_INET;     
    svraddr.sin_addr.s_addr = htonl(INADDR_ANY);   
    svraddr.sin_port=htons(uListenPort);     
    bind(listenfd,(sockaddr *)&svraddr, sizeof(svraddr));
    //监听,准备接收连接   
    ret = listen(listenfd, iBacklogSize);
    if (ret != 0)
    {
        cout << "AcceptThread, listen fail:" << ret << ",errno:" << errno << endl;
        
        close(listenfd);
        close(epfd);
        
        return NULL;
    }   
    
    while (g_bRun)
    {
        //等待epoll事件的发生,如果当前有信号的句柄数大于输出事件数组的最大大小,超过部分会在下次epoll_wait时输出,事件不会丢        
        nfds = epoll_wait(epfd, events, MAXEVENTS, 500);
        
        //处理所发生的所有事件             
        for (i = 0; i < nfds && g_bRun; ++i)         
        {
            if (events[i].data.fd == listenfd)        //是本监听socket上的事件   
            {
                cout << "AcceptThread, events:" << events[i].events << ",errno:" << errno << endl;
                
                if (events[i].events&EPOLLIN)    //有连接到来
                {
                    do
                    {
                        clilen = sizeof(struct sockaddr);               
                        connfd = accept(listenfd,(sockaddr *)&cliaddr, &clilen);                
                        if (connfd > 0)
                        {
                            cout << "AcceptThread, accept:" << connfd << ",errno:" << errno << ",connect:" << inet_ntoa(cliaddr.sin_addr) << ":" << ntohs(cliaddr.sin_port) << endl;
                            
                            //往管道写数据
                            msg.op = 1;
                            msg.fd = connfd;
                            msg.ip = cliaddr.sin_addr.s_addr;
                            msg.port = cliaddr.sin_port;
                            ret = write(g_ConnInfo.wfd, &msg, 14);
                            if (ret !=  14)
                            {
                                cout << "AcceptThread, write fail:" << ret << ",errno:" << errno << endl;
                                
                                close(connfd);
                            }
                        }
                        else
                        {
                            cout << "AcceptThread, accept:" << connfd << ",errno:" << errno << endl;

                            if (errno == EAGAIN)    //没有连接需要接收了
                            {
                                break;
                            }
                            else if (errno == EINTR)    //可能被中断信号打断,,经过验证对非阻塞socket并未收到此错误,应该可以省掉该步判断
                            {
                                ;
                            }
                            else    //其它情况可以认为该描述字出现错误,应该关闭后重新监听
                            {

                                //此时说明该描述字已经出错了,需要重新创建和监听
                                close(listenfd);                     
                                epoll_ctl(epfd, EPOLL_CTL_DEL, listenfd, &ev);
                                
                                //创建监听socket
                                listenfd = socket(AF_INET, SOCK_STREAM, 0);
                                if (listenfd < 0)
                                {
                                    cout << "AcceptThread, socket fail:" << epfd << ",errno:" << errno << endl;
                                    
                                    close(epfd);
                                    
                                    return NULL;
                                }
                                
                                //把监听socket设置为非阻塞方式     
                                setnonblocking(listenfd);
                                //设置监听socket为端口重用 
                                setreuseaddr(listenfd);
                                  
                                //设置与要处理的事件相关的文件描述符     
                                ev.data.fd = listenfd;     
                                //设置要处理的事件类型     
                                ev.events = EPOLLIN|EPOLLET;        
                                //注册epoll事件     
                                ret = epoll_ctl(epfd, EPOLL_CTL_ADD, listenfd, &ev);
                                if (ret != 0)
                                {
                                    cout << "AcceptThread, epoll_ctl fail:" << ret << ",errno:" << errno << endl;
                                    
                                    close(listenfd);
                                    close(epfd);
                                
                                    return NULL;
                                }   
                             
                                bzero(&svraddr, sizeof(svraddr));     
                                svraddr.sin_family = AF_INET;     
                                svraddr.sin_addr.s_addr = htonl(INADDR_ANY);   
                                svraddr.sin_port=htons(uListenPort);     
                                bind(listenfd,(sockaddr *)&svraddr, sizeof(svraddr));
                                //监听,准备接收连接   
                                ret = listen(listenfd, iBacklogSize);
                                if (ret != 0)
                                {
                                    cout << "AcceptThread, listen fail:" << ret << ",errno:" << errno << endl;
                                    
                                    close(listenfd);
                                    close(epfd);
                                    
                                    return NULL;
                                }
                            }
                        }
                    } while (g_bRun);
                }
                else if (events[i].events&EPOLLERR || events[i].events&EPOLLHUP)    //有异常发生
                {
                    //此时说明该描述字已经出错了,需要重新创建和监听
                    close(listenfd);                     
                    epoll_ctl(epfd, EPOLL_CTL_DEL, listenfd, &ev);
                    
                    //创建监听socket
                    listenfd = socket(AF_INET, SOCK_STREAM, 0);
                    if (listenfd < 0)
                    {
                        cout << "AcceptThread, socket fail:" << epfd << ",errno:" << errno << endl;
                        
                        close(epfd);
                        
                        return NULL;
                    }
                    
                    //把监听socket设置为非阻塞方式     
                    setnonblocking(listenfd);
                    //设置监听socket为端口重用 
                    setreuseaddr(listenfd);
                      
                    //设置与要处理的事件相关的文件描述符     
                    ev.data.fd = listenfd;     
                    //设置要处理的事件类型     
                    ev.events = EPOLLIN|EPOLLET;        
                    //注册epoll事件     
                    ret = epoll_ctl(epfd, EPOLL_CTL_ADD, listenfd, &ev);
                    if (ret != 0)
                    {
                        cout << "AcceptThread, epoll_ctl fail:" << ret << ",errno:" << errno << endl;
                        
                        close(listenfd);
                        close(epfd);
                        
                        return NULL;
                    }   
                 
                    bzero(&svraddr, sizeof(svraddr));     
                    svraddr.sin_family = AF_INET;     
                    svraddr.sin_addr.s_addr = htonl(INADDR_ANY);   
                    svraddr.sin_port=htons(uListenPort);     
                    bind(listenfd,(sockaddr *)&svraddr, sizeof(svraddr));
                    //监听,准备接收连接   
                    ret = listen(listenfd, iBacklogSize);
                    if (ret != 0)
                    {
                        cout << "AcceptThread, listen fail:" << ret << ",errno:" << errno << endl;
                        
                        close(listenfd);
                        close(epfd);
                        
                        return NULL;
                    }
                }
            }
        }
    }
    
    //关闭监听描述字
    if (listenfd > 0)
    {
        close(listenfd);
    }
    //关闭创建的epoll
    if (epfd > 0)
    {
        close(epfd);
    }

    cout << "AcceptThread, exit" << endl;

    return NULL;
}

//读数据线程
void * ReadThread(void *arg)
{
    cout << "ReadThread, enter" << endl;
    
    int ret;        //临时变量,存放返回值
    int epfd;        //连接用的epoll
    int i;            //临时变量,轮询数组用
    int nfds;        //临时变量,有多少个socket有事件
   
    struct epoll_event ev;                     //事件临时变量
    const int MAXEVENTS = 1024;                //最大事件数
    struct epoll_event events[MAXEVENTS];    //监听事件数组

    int iBackStoreSize = 1024;
    
    const int MAXBUFSIZE = 8192;                    //读数据缓冲区大小
    char buf[MAXBUFSIZE];
    int nread;                                        //读到的字节数
    struct ipport tIpPort;                            //地址端口信息
    struct peerinfo tPeerInfo;                        //对方连接信息
    map<int, struct ipport> mIpPort;                //socket对应的对方地址端口信息
    map<int, struct ipport>::iterator itIpPort;                    //临时迭代子
    map<struct ipport, struct peerinfo>::iterator itPeerInfo;    //临时迭代子
    
    struct pipemsg msg;                        //消息队列数据

    //创建epoll,对2.6.8以后的版本,其参数无效,只要大于0的数值就行,内核自己动态分配
    epfd = epoll_create(iBackStoreSize);
    if (epfd < 0)
    {
        cout << "ReadThread, epoll_create fail:" << epfd << ",errno:" << errno << endl;
        
        return NULL;
    }

    while (g_bRun)
    {
        //从管道读数据
        do
        {
            ret = read(g_ConnInfo.rfd, &msg, 14);
            if (ret > 0)
            {
                //队列中的fd必须是有效的
                if (ret == 14 && msg.fd > 0)
                {
                    if (msg.op == 1)    //收到新的连接
                    {
                        cout << "ReadThread, recv connect:" << msg.fd << ",errno:" << errno << endl;
                        
                        //把socket设置为非阻塞方式
                        setnonblocking(msg.fd);  
                        //设置描述符信息和数组下标信息
                        ev.data.fd = msg.fd;                
                        //设置用于注测的读操作事件                 
                        ev.events = EPOLLIN|EPOLLET;               
                        //注册ev                 
                        ret = epoll_ctl(epfd, EPOLL_CTL_ADD, msg.fd, &ev);
                        if (ret != 0)
                        {
                            cout << "ReadThread, epoll_ctl fail:" << ret << ",errno:" << errno << endl;
            
                            close(msg.fd);
                        }
                        else
                        {
                            mIpPort[msg.fd] = tIpPort;
                            
                            tPeerInfo.fd = msg.fd;
                            tPeerInfo.contime = time(NULL);
                            tPeerInfo.rcvtime = 0;
                            tPeerInfo.rcvbyte = 0;
                            tPeerInfo.sndtime = 0;
                            tPeerInfo.sndbyte = 0;
                            g_ConnInfo.peer[tIpPort] = tPeerInfo;
                        }
                    }
                    else if (msg.op == 2)    //断开某个连接
                    {
                        cout << "ReadThread, recv close:" << msg.fd << ",errno:" << errno << endl;
                        
                        close(msg.fd);
                        epoll_ctl(epfd, EPOLL_CTL_DEL, msg.fd, &ev);
                        
                        itIpPort = mIpPort.find(msg.fd);
                        if (itIpPort != mIpPort.end())
                        {
                            mIpPort.erase(itIpPort);
                            
                            itPeerInfo = g_ConnInfo.peer.find(itIpPort->second);
                            if (itPeerInfo != g_ConnInfo.peer.end())
                            {
                                g_ConnInfo.peer.erase(itPeerInfo);
                            }
                        }
                    }
                }
            }
            else
            {
                break;
            }
        } while(g_bRun);
        
        //等待epoll事件的发生,如果当前有信号的句柄数大于输出事件数组的最大大小,超过部分会在下次epoll_wait时输出,事件不会丢        
        nfds = epoll_wait(epfd, events, MAXEVENTS, 500);
        
        //处理所发生的所有事件             
        for (i = 0; i < nfds && g_bRun; ++i)         
        {
            cout << "ReadThread, events:" << events[i].events << ",errno:" << errno << endl;
                
            if (events[i].events&EPOLLIN)   //有数据可读          
            {        
                do
                {
                    bzero(buf, MAXBUFSIZE);
                    nread = read(events[i].data.fd, buf, MAXBUFSIZE);
                    if (nread > 0)    //读到数据
                    {
                        cout << "ReadThread, read:" << nread << ",errno:" << errno << endl;
                        
                        itIpPort = mIpPort.find(events[i].data.fd);
                        if (itIpPort != mIpPort.end())
                        {
                            itPeerInfo = g_ConnInfo.peer.find(itIpPort->second);
                            if (itPeerInfo != g_ConnInfo.peer.end())
                            {
                                itPeerInfo->second.rcvtime = time(NULL);
                                itPeerInfo->second.rcvbyte += nread;
                            }
                        }
                    }
                    else if (nread < 0) //读取失败
                    {
                        if (errno == EAGAIN)    //没有数据了
                        {
                            cout << "ReadThread, read:" << nread << ",errno:" << errno << ",no data" << endl;
                            
                            break;
                        }
                        else if(errno == EINTR)        //可能被内部中断信号打断,经过验证对非阻塞socket并未收到此错误,应该可以省掉该步判断
                        {
                            cout << "ReadThread, read:" << nread << ",errno:" << errno << ",interrupt" << endl;
                        }
                        else    //客户端主动关闭
                        {
                            cout << "ReadThread, read:" << nread << ",errno:" << errno << ",peer error" << endl;
                            
                            close(events[i].data.fd);                     
                            epoll_ctl(epfd, EPOLL_CTL_DEL, events[i].data.fd, &ev);                
                            itIpPort = mIpPort.find(events[i].data.fd);
                            if (itIpPort != mIpPort.end())
                            {
                                mIpPort.erase(itIpPort);
                                
                                itPeerInfo = g_ConnInfo.peer.find(itIpPort->second);
                                if (itPeerInfo != g_ConnInfo.peer.end())
                                {
                                    g_ConnInfo.peer.erase(itPeerInfo);
                                }
                            }
                            
                            break;
                        }
                    }
                    else if (nread == 0) //客户端主动关闭
                    {
                        cout << "ReadThread, read:" << nread << ",errno:" << errno << ",peer close" << endl;
                            
                        close(events[i].data.fd);                     
                        epoll_ctl(epfd, EPOLL_CTL_DEL, events[i].data.fd, &ev);
                        itIpPort = mIpPort.find(events[i].data.fd);
                        if (itIpPort != mIpPort.end())
                        {
                            mIpPort.erase(itIpPort);
                            
                            itPeerInfo = g_ConnInfo.peer.find(itIpPort->second);
                            if (itPeerInfo != g_ConnInfo.peer.end())
                            {
                                g_ConnInfo.peer.erase(itPeerInfo);
                            }
                        }

                        break;      
                    }
                } while (g_bRun);
            }
            else if (events[i].events&EPOLLERR || events[i].events&EPOLLHUP)    //有异常发生
            {
                cout << "ReadThread, read:" << nread << ",errno:" << errno << ",err or hup" << endl;

                close(events[i].data.fd);                     
                epoll_ctl(epfd, EPOLL_CTL_DEL, events[i].data.fd, &ev);
                itIpPort = mIpPort.find(events[i].data.fd);
                if (itIpPort != mIpPort.end())
                {
                    mIpPort.erase(itIpPort);
                    
                    itPeerInfo = g_ConnInfo.peer.find(itIpPort->second);
                    if (itPeerInfo != g_ConnInfo.peer.end())
                    {
                        g_ConnInfo.peer.erase(itPeerInfo);
                    }
                }
            }
        }
    }
    
    //关闭所有连接
    for (itIpPort = mIpPort.begin(); itIpPort != mIpPort.end(); itIpPort++)
    {
        if (itIpPort->first > 0)
        {
            close(itIpPort->first);
        }
    }
    //关闭创建的epoll
    if (epfd > 0)
    {
        close(epfd);
    }
    
    cout << "ReadThread, exit" << endl;

    return NULL;
}

int main(int argc, char* argv[])
{
    int ret;
    int fd[2];                    //读写管道
    pthread_t iAcceptThreadId;    //接收连接线程ID
    pthread_t iReadThreadId;    //读数据线程ID
    
    //为让应用程序不必对慢速系统调用的errno做EINTR检查,可以采取两种方式:1.屏蔽中断信号,2.处理中断信号
    //1.由signal()函数安装的信号处理程序，系统默认会自动重启动被中断的系统调用，而不是让它出错返回，
    //  所以应用程序不必对慢速系统调用的errno做EINTR检查，这就是自动重启动机制.
    //2.对sigaction()的默认动作是不自动重启动被中断的系统调用，
    //  因此如果我们在使用sigaction()时需要自动重启动被中断的系统调用，就需要使用sigaction的SA_RESTART选项

    //忽略信号    
    //sigset_t newmask;
    //sigemptyset(&newmask);
    //sigaddset(&newmask, SIGINT);
    //sigaddset(&newmask, SIGUSR1);
    //sigaddset(&newmask, SIGUSR2);
    //sigaddset(&newmask, SIGQUIT);
    //pthread_sigmask(SIG_BLOCK, &newmask, NULL);
    
    //处理信号
    //默认自动重启动被中断的系统调用,而不是让它出错返回,应用程序不必对慢速系统调用的errno做EINTR检查
    //signal(SIGINT, sig_pro);
    //signal(SIGUSR1, sig_pro);
    //signal(SIGUSR2, sig_pro);
    //signal(SIGQUIT, sig_pro);

    struct sigaction sa;
    sa.sa_flags = SA_RESTART;
    sa.sa_handler = sig_pro;
    sigaction(SIGINT, &sa, NULL);
    sigaction(SIGUSR1, &sa, NULL);
    sigaction(SIGUSR2, &sa, NULL);
    sigaction(SIGQUIT, &sa, NULL);
    
    //设置为运行状态
    g_bRun = true;
    
    //创建管道
    ret = pipe(fd);
    if (ret < 0)
    {
        cout << "main, pipe fail:" << ret << ",errno:" << errno << endl;
        
        g_bRun = false;
        
        return 0;
    }
    g_ConnInfo.rfd = fd[0];
    g_ConnInfo.wfd = fd[1];
    
    //读端设置为非阻塞方式
    setnonblocking(g_ConnInfo.rfd);

    //创建线程时采用的参数
    pthread_attr_t attr;
    pthread_attr_init(&attr);
    pthread_attr_setscope(&attr, PTHREAD_SCOPE_SYSTEM);                 //设置绑定的线程,以获取较高的响应速度
    //pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);        //设置分离的线程
    
    //创建接收连接线程
    ret = pthread_create(&iAcceptThreadId, &attr, AcceptThread, NULL);
    if( ret != 0)
    {
        cout << "main, pthread_create AcceptThread fail:" << ret << ",errno:" << errno << endl;
        
        g_bRun = false;
        close(g_ConnInfo.rfd);
        close(g_ConnInfo.wfd);
        
        return 0;
    }
    
    //创建接收连接线程
    ret = pthread_create(&iReadThreadId, &attr, ReadThread, NULL);
    if( ret != 0以上是关于epoll完整例子的主要内容，如果未能解决你的问题，请参考以下文章
 
 Linux IO多路复用之epoll网络编程及源码（转）
 VSCode自定义代码片段——git命令操作一个完整流程
 VSCode自定义代码片段15——git命令操作一个完整流程
 VSCode自定义代码片段15——git命令操作一个完整流程
 golang 在golang起点上的Epoll例子
 golang 在golang起点上的Epoll例子