HDU 4280 ISAP+BFS 最大流 模板

Posted 2020-10-09 半根毛线code

Island Transport

Time Limit: 20000/10000 MS (Java/Others)    Memory Limit: 65536/65536 K (Java/Others)
Total Submission(s): 9473    Accepted Submission(s): 3069

Problem Description

　　In the vast waters far far away, there are many islands. People are living on the islands, and all the transport among the islands relies on the ships.
　　You have a transportation company there. Some routes are opened for passengers. Each route is a straight line connecting two different islands, and it is bidirectional. Within an hour, a route can transport a certain number of passengers in one direction. For safety, no two routes are cross or overlap and no routes will pass an island except the departing island and the arriving island. Each island can be treated as a point on the XY plane coordinate system. X coordinate increase from west to east, and Y coordinate increase from south to north.
　　The transport capacity is important to you. Suppose many passengers depart from the westernmost island and would like to arrive at the easternmost island, the maximum number of passengers arrive at the latter within every hour is the transport capacity. Please calculate it.

 

 

Input

　　The first line contains one integer T (1<=T<=20), the number of test cases.
　　Then T test cases follow. The first line of each test case contains two integers N and M (2<=N,M<=100000), the number of islands and the number of routes. Islands are number from 1 to N.
　　Then N lines follow. Each line contain two integers, the X and Y coordinate of an island. The K-th line in the N lines describes the island K. The absolute values of all the coordinates are no more than 100000.
　　Then M lines follow. Each line contains three integers I1, I2 (1<=I1,I2<=N) and C (1<=C<=10000) . It means there is a route connecting island I1 and island I2, and it can transport C passengers in one direction within an hour.
　　It is guaranteed that the routes obey the rules described above. There is only one island is westernmost and only one island is easternmost. No two islands would have the same coordinates. Each island can go to any other island by the routes.

 

 

Output

　　For each test case, output an integer in one line, the transport capacity.

 

 

Sample Input

2

5 7

3 3

3 0

3 1

0 0

4 5

1 3 3

2 3 4

2 4 3

1 5 6

4 5 3

1 4 4

3 4 2

6 7

-1 -1

0 1

0 2

1 0

1 1

2 3

1 2 1

2 3 6

4 5 5

5 6 3

1 4 6

2 5 5

3 6 4

 

 

Sample Output

9

6

 

 最大流裸题　＊可用模板

  1 #include<cstdio>
  2 #include<cstring>
  3 #include<iostream>
  4 #include<algorithm>
  5 #include<map>
  6 using namespace std;
  7 #define ll long long
  8 const int M = 100010;
  9 const int INF = 0x3f3f3f3f;
 10 struct Edge{
 11  int to,next,cap,flow;
 12 }edge[4*M];
 13 int tol;
 14 int head[M];
 15 int gap[M],dep[M],cur[M];
 16 void init()
 17 {
 18     tol=0;
 19     memset(head,-1,sizeof(head));
 20 }
 21 void addedge(int u,int v,int w){
 22     int rw=0;
 23     edge[tol].to=v;edge[tol].cap=w;edge[tol].flow=0;
 24     edge[tol].next=head[u];head[u]=tol++;
 25     edge[tol].to=u;edge[tol].cap=rw;edge[tol].flow=0;
 26     edge[tol].next=head[v];head[v]=tol++;
 27 }
 28 int Q[M];
 29 void bfs(int start,int end){
 30     memset(dep,-1,sizeof(dep));
 31     memset(gap,0,sizeof(gap));
 32     gap[0]=1;
 33     int front=0,rear=0;
 34     dep[end]=0;
 35     Q[rear++]=end;
 36     while(front !=rear){
 37         int u=Q[front++];
 38         for(int i=head[u];i!=-1;i=edge[i].next){
 39             int v=edge[i].to;
 40             if(dep[v]!=-1) continue;
 41             Q[rear++]=v;
 42             dep[v]=dep[u]+1;
 43             gap[dep[v]]++;
 44         }
 45     }
 46 }
 47 int S[M];
 48 int sap(int start,int end,int N){
 49     bfs(start,end);
 50     memcpy(cur,head,sizeof(head));
 51     int top=0;
 52     int u=start;
 53     int ans=0;
 54     while(dep[start]<N){
 55         if(u==end){
 56            int Min=INF;
 57            int inser;
 58            for(int i=0;i<top;i++){
 59             if(Min>edge[S[i]].cap-edge[S[i]].flow){
 60                 Min=edge[S[i]].cap-edge[S[i]].flow;
 61                 inser=i;
 62             }
 63            }
 64            for(int i=0;i<top;i++){
 65             edge[S[i]].flow+=Min;
 66             edge[S[i]^1].flow-=Min;
 67            }
 68            ans+=Min;
 69            top=inser;
 70            u=edge[S[top]^1].to;
 71            continue;
 72         }
 73         bool flag=false;
 74         int v;
 75         for(int i=cur[u];i!=-1;i=edge[i].next){
 76             v=edge[i].to;
 77             if(edge[i].cap-edge[i].flow&&dep[v]+1==dep[u]){
 78                 flag=true;
 79                 cur[u]=i;
 80                 break;
 81             }
 82         }
 83         if(flag){
 84             S[top++] = cur[u];
 85             u=v;
 86             continue;
 87         }
 88         int Min=N;
 89         for(int i=head[u];i!=-1;i=edge[i].next){
 90             if(edge[i].cap-edge[i].flow&&dep[edge[i].to]<Min){
 91                 Min=dep[edge[i].to];
 92                 cur[u]=i;
 93             }
 94         }
 95         gap[dep[u]]--;
 96         if(!gap[dep[u]]) return ans;
 97         dep[u]=Min+1;
 98         gap[dep[u]]++;
 99         if(u!=start) u=edge[S[--top]^1].to;
100     }
101     return ans;
102 }
103 int t;
104 int n,m;
105 int main()
106 {
107     scanf("%d",&t);
108     while(t--){
109        init();
110         scanf("%d %d",&n,&m);
111         int minx=10000000;
112         int maxx=-10000000;
113         int start,tail;
114         for(int i=1;i<=n;i++){
115             int x,y;
116             scanf("%d %d",&x,&y);
117             if(x<minx){minx=x;start=i;}
118             else if(x>maxx){maxx=x;tail=i;}
119         }
120         for(int i=1;i<=m;i++){
121             int  qq,w,e;
122             scanf("%d %d %d",&qq,&w,&e);
123             addedge(qq,w,e);
124             addedge(w,qq,e);
125         }
126         printf("%d\n",sap(start,tail,n));
127     }
128     return 0;
129 }