grbl controller 安装在树莓派上
Posted E米阳光
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了grbl controller 安装在树莓派上相关的知识，希望对你有一定的参考价值。
http://zapmaker.org/raspberry-pi/running-grbl-controller-on-raspberry-pi/
按照方法测试成功。最好命令复制。不要自己输入 。
- sudo apt-get update (required for AlaMode)
- sudo apt-get install xrdp
- sudo apt-get install arduino (required for AlaMode) [For normal Pi, this step is optional, but good to have. NOTE: I got an error that not all items could be downloaded. I tried to repeat command by adding a --fix-missing, i.e. sudo apt-get install --fix-missing arduino but it didn‘t help. UPDATE: The latest download as of May 2013 doesn‘t have this problem]
- sudo apt-get install libudev-dev
- sudo apt-get install qtcreator [This step takes quite awhile to complete. Note: I got an error downloading as in a previous step. If you get an error, repeat command but add a --fix-missing, i.e. sudo apt-get install --fix-missing qtcreator, in this case the --fix-missing worked.]
- sudo apt-get install git
- mkdir github
- cd github
- git clone https://github.com/zapmaker/GrblHoming
- curl http://www.shapeoko.com/wiki/images/6/6a/Coaster.txt > Coaster.nc
- cd GrblHoming
- qmake GcodeSenderGUIthreads.pro
- make
Make sure that you have your Grbl/Arduino plugged into the pi prior to running the last command:
./GrblController
以上是关于grbl controller 安装在树莓派上的主要内容，如果未能解决你的问题，请参考以下文章