AZURE云上 mkfs.ext4 /dev/sdc 导致宕机问题解决纪实

Posted 2020-10-02 wzjhoutai

1、mkfs.ext4后down机

Azure上新建的vm。准备安装oracle数据库，可是挂载的磁盘，初始化后，直接down机了。例如以下图。失去连接，xshell窗体直接断开退出了。看以下图片

021.png

 

尝试过一下办法：

 

（1）      azure管理界面。重新启动vm。再来一遍。还是down机。

（2）      删除这台vm，重建一台新的vm。还是一样仅仅要运行mkfs.ext4 /dev/sdc直接down机。

（3）      在别的区建vm。不在东区建在北区建。还是一样。

 

 

2、问题分析

曾经附加的磁盘，直接mkfs.ext4 /dev/sdc就能够了。如今为啥不行？去fdisk看磁盘信息：

（1）如今的fdisk –l中的/dev/sdc信息： Disk /dev/sdc: 1098.4 GB, 1098437885952 bytes 255 heads, 63 sectors/track, 133544 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes   （2）曾经的fdisk –l中的/dev/sdc信息： Disk /dev/sdd: 1073.7 GB, 1073741824000 bytes 255 heads, 63 sectors/track, 130541 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000   看到多了“Disk identifier: 0x00000000”信息，正式由于多了这个Disk identifier。才干直接进行mkfs.ext4了。

 

经过google之后，发现Disk identifier须要先分好区才会有。所以新的/dev/sdc磁盘不能直接mkfs.ext4的原因是还没有分好区，要用fdisk分好区之后。再能进行初始化操作。

 

3、fdisk磁盘分区

用fdisk进行磁盘分区：

[[email protected] ~]# fdisk /dev/sdc Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel with disk identifier 0xd788cc0a. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won‘t be recoverable.   Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)   WARNING: DOS-compatible mode is deprecated. It‘s strongly recommended to          switch off the mode (command ‘c‘) and change display units to          sectors (command ‘u‘).   Command (m for help): n Command action    e   extended    p   primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-133544, default 1): Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-133544, default 133544): Using default value 133544   Command (m for help): m Command action    a   toggle a bootable flag    b   edit bsd disklabel    c   toggle the dos compatibility flag    d   delete a partition    l   list known partition types    m   print this menu    n   add a new partition    o   create a new empty DOS partition table    p   print the partition table    q   quit without saving changes    s   create a new empty Sun disklabel    t   change a partition‘s system id    u   change display/entry units    v   verify the partition table    w   write table to disk and exit    x   extra functionality (experts only)   Command (m for help): w The partition table has been altered!   Calling ioctl() to re-read partition table. Syncing disks. [[email protected] ~]#

 

再次查看，会有Disk identifier信息了。也有了新的分区/dev/sdc1，例如以下：

[[email protected] ~]# fdisk -l   Disk /dev/sda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c23d3      Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1        3789    30432256   83  Linux /dev/sda2            3789        3917     1024000   82  Linux swap / Solaris   Disk /dev/sdb: 240.5 GB, 240518168576 bytes 255 heads, 63 sectors/track, 29241 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x40a7f99c      Device Boot      Start         End      Blocks   Id  System /dev/sdb1               1       29242   234879936   83  Linux Disk /dev/sdc: 1098.4 GB, 1098437885952 bytes 255 heads, 63 sectors/track, 133544 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd788cc0a      Device Boot      Start         End      Blocks   Id  System /dev/sdc1               1      133544  1072692148+  83  Linux

 

 

 

4、mkfs.ext4进行分区初始化

# 使用 mkfs.ext4 命令格式化磁盘成格式化成ext4各式的文件系统。

[[email protected] ~]# mkfs.ext4 /dev/sdc1 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 67043328 inodes, 268173037 blocks 13408651 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=4294967296 8184 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks:          32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,          4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,          102400000, 214990848   Writing inode tables: done                            Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done   This filesystem will be automatically checked every 27 mounts or 180 days, whichever comes first.  Use tune2fs -c or -i to override. [[email protected] ~]#

 

例如以下图所看到的：

22.png

5、挂载磁盘加入启动载入

（1）開始挂载新的分区磁盘到/oracle [[email protected] ~]# mkdir /oracle [[email protected] ~]# mount /dev/sdc1 /oracle [[email protected] ~]#   （2）开机启动挂载配置 [[email protected] ~]# vim /etc/fstab You have new mail in /var/spool/mail/root [[email protected] ~]# more /etc/fstab   # # /etc/fstab # Created by anaconda on Wed Jan 15 04:45:47 2014 # # Accessible filesystems, by reference, are maintained under ‘/dev/disk‘ # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # UUID=6d089360-3e14-401d-91d0-378f3fd09332 /                       ext4    defaults        1 1 /dev/sdc1                /oracle                   ext4    defaults        1 2 tmpfs                   /dev/shm                tmpfs   defaults        0 0 devpts                  /dev/pts                devpts  gid=5,mode=620  0 0 sysfs                   /sys                    sysfs   defaults        0 0 proc                    /proc                   proc    defaults        0 0 [[email protected] ~]#

 

 

OK。磁盘已经准备好了，能够正常安装oracle数据库了。