centos7安装squid代理

Posted 2020-10-01

局域网只有一台服务器可以上互联网，其他机器需要使用代理上网，windows下可以用ccproxy，linux建议使用squid(dns解析需要配合iptables)

1、安装squid

yum install squid.x86_64

2、配置squid配置文件。

vi /etc/squid/squid.conf

#

# Recommended minimum configuration:

#

# Example rule allowing access from your local networks.

# Adapt to list your (internal) IP networks from where browsing

# should be allowed

#acl localnet src 10.0.0.0/8 # RFC1918 possible internal network

#acl localnet src 172.16.0.0/12 # RFC1918 possible internal network

acl localnet src 192.168.0.0/16 # RFC1918 possible internal network 允许192.168.0.0/16网段

acl localnet src fc00::/7       # RFC 4193 local private network range

acl localnet src fe80::/10      # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443

acl Safe_ports port 80 # http

acl Safe_ports port 21 # ftp

acl Safe_ports port 443 # https

acl Safe_ports port 70 # gopher

acl Safe_ports port 210 # wais

acl Safe_ports port 1025-65535 # unregistered ports

acl Safe_ports port 280 # http-mgmt

acl Safe_ports port 488 # gss-http

acl Safe_ports port 591 # filemaker

acl Safe_ports port 777 # multiling http

acl CONNECT method CONNECT

#

# Recommended minimum Access Permission configuration:

#

# Deny requests to certain unsafe ports

http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports

http_access deny CONNECT !SSL_ports

# Only allow cachemgr access from localhost

http_access allow localhost manager

http_access deny manager

# We strongly recommend the following be uncommented to protect innocent

# web applications running on the proxy server who think the only

# one who can access services on "localhost" is a local user

#http_access deny to_localhost

#

# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS

#

# Example rule allowing access from your local networks.

# Adapt localnet in the ACL section to list your (internal) IP networks

# from where browsing should be allowed

http_access allow localnet

http_access allow localhost

# And finally deny all other access to this proxy

http_access deny all

# Squid normally listens to port 3128 

http_port 808 

# Uncomment and adjust the following to add a disk cache directory.

cache_dir ufs /var/spool/squid 100 16 256

# Leave coredumps in the first cache dir

coredump_dir /var/spool/squid

#

# Add any of your own refresh_pattern entries above these.

#

refresh_pattern ^ftp: 1440 20% 10080

refresh_pattern ^gopher: 1440 0% 1440

refresh_pattern -i (/cgi-bin/|\?) 0 0% 0

refresh_pattern . 0 20% 4320

到这里squid就配置完了。

由于客户端pc的dns解析都没有权限，所以还要把客户端的dns解析也由squid服务器这台主机转发出去。

1) echo "1" > /proc/sys/net/ipv4/ip_forward

2)iptables 配置

iptables -t nat -A PREROUTING -s -p udp --dport 53 -j DNAT --to 8.8.8.8

iptables -t nat -A POSTROUTING -p udp --dport 53 -j SNAT --to 192.168.144.49

iptables -A FORWARD -j ACCEPT

客户端配置

export http_proxy=http://192.168.144.49:808

export https_proxy=https://192.168.144.49:808

客户端配置dns

chattr -i /etc/resolv.conf  （ubuntu）

vi /etc/resolv.conf

nameserver 192.168.144.49

验证一下

[email protected]:~# ping www.sina.com

PING wwwus.sina.com (66.102.251.33) 56(84) bytes of data.

ok，dns可以用了。

curl www.sina.com

返回一大串代理，OK，代理配置成功了。

本文出自 “高迪的个人博客” 博客，请务必保留此出处http://gaodi2002.blog.51cto.com/5940761/1953433