数据预处理之one-hot编码

Posted 2020-09-30

What

用二进制表示机器状态。

使用N位状态寄存器来对N个状态进行编码 参考链接

例如：

自然状态码为：000,001,010,011,100,101

独热编码为：000001,000010,000100,001000,010000,100000

Why

在机器学习中，经常有一些值为离散的属性，比如，性别（男1，女0），区域（采用区域编号）。这些作为特征，其取值只代表类别，大小并没有实际意义。而机器学习算法往往是局限于应用在连续的，有序的数据上。这就需要对这类特征进行预处理，来使我们的算法效果达到最好。

 另外还可以从以下几点进行阐述：参考链接

1、Why do we binarize categorical features?
We binarize the categorical input so that they can be thought of as a vector from the Euclidean space (we call this as embedding the vector in the Euclidean space).使用one-hot编码，将离散特征的取值扩展到了欧式空间，离散特征的某个取值就对应欧式空间的某个点。
 
2、Why do we embed the feature vectors in the Euclidean space?
Because many algorithms for classification/regression/clustering etc. requires computing distances between features or similarities between features. And many definitions of distances and similarities are defined over features in Euclidean space. So, we would like our features to lie in the Euclidean space as well.将离散特征通过one-hot编码映射到欧式空间，是因为，在回归，分类，聚类等机器学习算法中，特征之间距离的计算或相似度的计算是非常重要的，而我们常用的距离或相似度的计算都是在欧式空间的相似度计算，计算余弦相似性，基于的就是欧式空间。


3、Why does embedding the feature vector in Euclidean space require us to binarize categorical features?
Let us take an example of a dataset with just one feature (say job_type as per your example) and let us say it takes three values 1,2,3.
Now, let us take three feature vectors x_1 = (1), x_2 = (2), x_3 = (3). What is the euclidean distance between x_1 and x_2, x_2 and x_3 & x_1 and x_3? d(x_1, x_2) = 1, d(x_2, x_3) = 1, d(x_1, x_3) = 2. This shows that distance between job type 1 and job type 2 is smaller than job type 1 and job type 3. Does this make sense? Can we even rationally define a proper distance between different job types? In many cases of categorical features, we can properly define distance between different values that the categorical feature takes. In such cases, isn‘t it fair to assume that all categorical features are equally far away from each other?
Now, let us see what happens when we binary the same feature vectors. Then, x_1 = (1, 0, 0), x_2 = (0, 1, 0), x_3 = (0, 0, 1). Now, what are the distances between them? They are sqrt(2). So, essentially, when we binarize the input, we implicitly state that all values of the categorical features are equally away from each other.
将离散型特征使用one-hot编码，确实会让特征之间的距离计算更加合理。比如，有一个离散型特征，代表工作类型，该离散型特征，共有三个取值，不使用one-hot编码，其表示分别是x_1 = (1), x_2 = (2), x_3 = (3)。两个工作之间的距离是，(x_1, x_2) = 1, d(x_2, x_3) = 1, d(x_1, x_3) = 2。那么x_1和x_3工作之间就越不相似吗？显然这样的表示，计算出来的特征的距离是不合理。那如果使用one-hot编码，则得到x_1 = (1, 0, 0), x_2 = (0, 1, 0), x_3 = (0, 0, 1)，那么两个工作之间的距离就都是sqrt(2).即每两个工作之间的距离是一样的，显得更合理。
4、About the original question?
Note that our reason for why binarize the categorical features is independent of the number of the values the categorical features take, so yes, even if the categorical feature takes 1000 values, we still would prefer to do binarization.
对离散型特征进行one-hot编码是为了让距离的计算显得更加合理。
5、Are there cases when we can avoid doing binarization?
Yes. As we figured out earlier, the reason we binarize is because we want some meaningful distance relationship between the different values. As long as there is some meaningful distance relationship, we can avoid binarizing the categorical feature. For example, if you are building a classifier to classify a webpage as important entity page (a page important to a particular entity) or not and let us say that you have the rank of the webpage in the search result for that entity as a feature, then 1] note that the rank feature is categorical, 2] rank 1 and rank 2 are clearly closer to each other than rank 1 and rank 3, so the rank feature defines a meaningful distance relationship and so, in this case, we don‘t have to binarize the categorical rank feature.

More generally, if you can cluster the categorical values into disjoint subsets such that the subsets have meaningful distance relationship amongst them, then you don‘t have binarize fully, instead you can split them only over these clusters. For example, if there is a categorical feature with 1000 values, but you can split these 1000 values into 2 groups of 400 and 600 (say) and within each group, the values have meaningful distance relationship, then instead of fully binarizing, you can just add 2 features, one for each cluster and that should be fine.
将离散型特征进行one-hot编码的作用，是为了让距离计算更合理，但如果特征是离散的，并且不用one-hot编码就可以很合理的计算出距离，那么就没必要进行one-hot编码，比如，该离散特征共有1000个取值，我们分成两组，分别是400和600,两个小组之间的距离有合适的定义，组内的距离也有合适的定义，那就没必要用one-hot 编码
 
离散特征进行one-hot编码后，编码后的特征，其实每一维度的特征都可以看做是连续的特征。就可以跟对连续型特征的归一化方法一样，对每一维特征进行归一化。比如归一化到[-1,1]或归一化到均值为0,方差为1

How

在python中可以使用sklearn提供的api直接对数据进行one-hot encoder

1 from sklearn.preprocessing import OneHotEncoder
2 
3 ohe=OneHotEncoder()
4 ohe.fit([[0],[1],[2],[3]])
5 
6 print(ohe.transform([0]).toarray())