WAVE PCM soundfile format

Posted zhaojihui

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了WAVE PCM soundfile format相关的知识,希望对你有一定的参考价值。

WAVE PCM soundfile format


The WAVE file format is a subset of Microsoft\'s RIFF specification for the storage of multimedia files. A RIFF file starts out with a file header followed by a sequence of data chunks. A WAVE file is often just a RIFF file with a single "WAVE" chunk which consists of two sub-chunks -- a "fmt " chunk specifying the data format and a "data" chunk containing the actual sample data. Call this form the "Canonical form". Who knows how it really all works. An almost complete description which seems totally useless unless you want to spend a week looking over it can be found at MSDN (mostly describes the non-PCM, or registered proprietary data formats).

I use the standard WAVE format as created by the sox program:

 

Offset  Size  Name             Description

The canonical WAVE format starts with the RIFF header:

0         4   ChunkID          Contains the letters "RIFF" in ASCII form
                               (0x52494646 big-endian form).
4         4   ChunkSize        36 + SubChunk2Size, or more precisely:
                               4 + (8 + SubChunk1Size) + (8 + SubChunk2Size)
                               This is the size of the rest of the chunk 
                               following this number.  This is the size of the 
                               entire file in bytes minus 8 bytes for the
                               two fields not included in this count:
                               ChunkID and ChunkSize.
8         4   Format           Contains the letters "WAVE"
                               (0x57415645 big-endian form).

The "WAVE" format consists of two subchunks: "fmt " and "data":
The "fmt " subchunk describes the sound data\'s format:

12        4   Subchunk1ID      Contains the letters "fmt "
                               (0x666d7420 big-endian form).
16        4   Subchunk1Size    16 for PCM.  This is the size of the
                               rest of the Subchunk which follows this number.
20        2   AudioFormat      PCM = 1 (i.e. Linear quantization)
                               Values other than 1 indicate some 
                               form of compression.
22        2   NumChannels      Mono = 1, Stereo = 2, etc.
24        4   SampleRate       8000, 44100, etc.
28        4   ByteRate         == SampleRate * NumChannels * BitsPerSample/8
32        2   BlockAlign       == NumChannels * BitsPerSample/8
                               The number of bytes for one sample including
                               all channels. I wonder what happens when
                               this number isn\'t an integer?
34        2   BitsPerSample    8 bits = 8, 16 bits = 16, etc.
          2   ExtraParamSize   if PCM, then doesn\'t exist
          X   ExtraParams      space for extra parameters

The "data" subchunk contains the size of the data and the actual sound:

36        4   Subchunk2ID      Contains the letters "data"
                               (0x64617461 big-endian form).
40        4   Subchunk2Size    == NumSamples * NumChannels * BitsPerSample/8
                               This is the number of bytes in the data.
                               You can also think of this as the size
                               of the read of the subchunk following this 
                               number.
44        *   Data             The actual sound data.


As an example, here are the opening 72 bytes of a WAVE file with bytes shown as hexadecimal numbers:

52 49 46 46 24 08 00 00 57 41 56 45 66 6d 74 20 10 00 00 00 01 00 02 00 
22 56 00 00 88 58 01 00 04 00 10 00 64 61 74 61 00 08 00 00 00 00 00 00 
24 17 1e f3 3c 13 3c 14 16 f9 18 f9 34 e7 23 a6 3c f2 24 f2 11 ce 1a 0d 

Here is the interpretation of these bytes as a WAVE soundfile: 


Notes:

  • The default byte ordering assumed for WAVE data files is little-endian. Files written using the big-endian byte ordering scheme have the identifier RIFX instead of RIFF.
  • The sample data must end on an even byte boundary. Whatever that means.
  • 8-bit samples are stored as unsigned bytes, ranging from 0 to 255. 16-bit samples are stored as 2\'s-complement signed integers, ranging from -32768 to 32767.
  • There may be additional subchunks in a Wave data stream. If so, each will have a char[4] SubChunkID, and unsigned long SubChunkSize, and SubChunkSize amount of data.
  • RIFF stands for Resource Interchange File Format.

General discussion of RIFF files:

Multimedia applications require the storage and management of a wide variety of data, including bitmaps, audio data, video data, and peripheral device control information. RIFF provides a way to store all these varied types of data. The type of data a RIFF file contains is indicated by the file extension. Examples of data that may be stored in RIFF files are:

  • Audio/visual interleaved data (.AVI)
  • Waveform data (.WAV)
  • Bitmapped data (.RDI)
  • MIDI information (.RMI)
  • Color palette (.PAL)
  • Multimedia movie (.RMN)
  • Animated cursor (.ANI)
  • A bundle of other RIFF files (.BND)

NOTE: At this point, AVI files are the only type of RIFF files that have been fully implemented using the current RIFF specification. Although WAV files have been implemented, these files are very simple, and their developers typically use an older specification in constructing them.

For more info see http://www.ora.com/centers/gff/formats/micriff/index.htm


References:

  1. http://www.ora.com/centers/gff/formats/micriff/index.htm (good).
  2. http://premium.microsoft.com/msdn/library/tools/dnmult/d1/newwave.htm
  3. http://www.lightlink.com/tjweber/StripWav/WAVE.html

以上是关于WAVE PCM soundfile format的主要内容,如果未能解决你的问题,请参考以下文章

使用 PyDub 时出错:WAVE 格式不支持 pcm_s8 编解码器

如何将Pcm格式的音频文件转换成Wave格式的文件

如何从 Wave Out 中捕获 PCM 数据

PCM Wave 文件中的数据长度使用 MemoryStream 和 WaveFileWriter

何时使用 Wave 可扩展格式?

iOS开发——WAVE音频文件解析