Jenkins 配置任务中的坑s

Posted xidd

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了Jenkins 配置任务中的坑s相关的知识,希望对你有一定的参考价值。

Jenkins

坑1:sh: adb: command not found

背景:在任务中使用了adb命令

adb 使用时要在服务器上配android-home的环境变量的

配置完成之后发现在服务器上 adb OK,但是在jenkins 执行job时不OK

参考一下两篇文档

https://stackoverflow.com/questions/29216244/jenkins-build-failed-due-to-missing-android-sdk

http://www.linuxdiyf.com/linux/28771.html

 

1. 在jenkins 设置里配置Android-home,然而并没有用

2. 在Execute shell 里将#!/bin/bash 改成 #!/bin/bash -ilex

jenkins没有加载/etc/profile导致,需要在jenkins调用shell脚本的最前面加一行脚本,#!/bin/bash -ilex,可以通过-i参数和-l参数让bash为login shell and interactive shell,就可以读取/etc/profile和~/.bash_profile等文件

3. 实际挨个试了下#!/bin/bash -ilex中的各个参数 发现有用的是-l

对于e参数表示一旦出错,就退出当前的shell,x参数表示可以显示所执行的每一条命令。

\'\'\'

-l        Make bash act as if it had been invoked as a login shell (see

                 INVOCATION below).

 

When  bash is invoked as an interactive login shell, or as a non-inter-

       active shell with the --login option, it first reads and executes  com-

       mands  from  the file /etc/profile, if that file exists.  After reading

       that file, it looks for ~/.bash_profile, ~/.bash_login, and ~/.profile,

       in  that order, and reads and executes commands from the first one that

       exists and is readable.  The --noprofile option may be  used  when  the

       shell is started to inhibit this behavior.

\'\'\' 

 综上,就是加载了/etc/profile或者其他几个配置环境变量的文件

所以直接改成在 shell 脚本里增加source /etc/profile就好啦~

 

 

坑2 Jenkins + python 的任务,console output 没有及时输出日志

期初是以为是 #!/bin/bash -ilex 中四个参数导致console output 没有输出,后来突然意识到是python的print应该有buffer的问题

https://stackoverflow.com/questions/22826006/how-to-get-python-print-result-in-jenkins-console-output

https://stackoverflow.com/questions/11631951/jenkins-console-output-not-in-realtime

有两种解释

1.jenkins 要输入换行符才能展示数据

Any output to stdout from a process spawned by Jenkins should be captured by Console Output. One caveat is that it won\'t be displayed until a newline character is printed, so make sure your lines are terminated.

2.print有buffer

  • ruby or python or any sensible scripting language will buffer the output; this is in order to minimize the IO; writing to disk is slow, writing to a console is slow...
  • usually the data gets flush()\'ed automatically after you have enough data in the buffer with special handling for newlines. e.g. writing a string without newline then sleep() would not write anything until after the sleep() is complete (I\'m only using sleep as an example, feel free to substitute with any other expensive system call).

解决方法看到两个

1.print 信息后加sys.stdout.flush()

2. 执行python时增加 -u 参数,即 python -u XXX.py

  • for python, you can use python -u or the environment variable PYTHONUNBUFFERED to make stdin/stdout/stout not buffered, but there are other solutions that do not change stdin or stderr

    export PYTHONUNBUFFERED=1

以上是关于Jenkins 配置任务中的坑s的主要内容,如果未能解决你的问题,请参考以下文章

jenkins+github持续集成中的坑

jenkins + Git 搭建持续集成环境

jenkins + Git 搭建持续集成环境

Jenkins一个任务中处理多个git仓库的解决

jenkins的Pipeline代码流水线管理

jenkins,自动部署scp传输错误的坑