delphi弹出信息框大全
Posted 纸上年华
tags:
篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了delphi弹出信息框大全相关的知识,希望对你有一定的参考价值。
1. 警告信息框 MessageBox(Handle,‘警告信息框‘,‘警告信息框‘,MB_ICONWARNING);
2.疑问信息框 MessageBox(Handle,‘疑问信息框‘,‘疑问信息框‘,MB_ICONQUESTION);
3.错误提示框 MessageBox(Handle,‘错误信息框‘,‘错误信息框‘,MB_ICONERROR);
4.提示信息框 MessageBox(Handle,‘提示信息框‘,‘提示信息框‘,MB_ICONASTERISK);
5.说明信息框 MessageBox(Handle,‘说明信息框‘,‘说明信息框‘,MB_HELP);
6.提示信息框 MessageBox(Handle,‘提示信息框‘,‘提示信息框‘,MB_OK);
7.确认信息框 MessageBox(Handle,‘确认信息框‘,‘确认信息框‘,MB_OKCANCEL);
8.重试信息框 MessageBox(Handle,‘重试信息框‘,‘重试信息框‘,MB_RETRYCANCEL);
9.是否信息框 Application.MessageBox(Handle,‘是否信息框‘,‘是否信息框‘,MB_YESNO);
10.是否取消信息框 Application.MessageBox(Handle,‘是否取消信息框‘,‘是否取消信息框‘,MB_YESNOCANCEL);
11 简单提示信息框 ShowMessage(‘这个就是ShowMessage函数生成的信息提示框!‘);
_____________________________________________________________________________
1. 警告信息框 MessageBox(Handle,‘程序超出内存。‘,‘错误‘,MB_OK+MB_ICONERROR)
MessageBox(0, ‘配置文件成功‘, ‘提示‘, mb_iconinformation
-----------------------------------
以下是详细说明
//ShowMessage:
begin
ShowMessage(‘提示内容‘); {标题默认工程名, 如: Proect1}
Application.Title := ‘警告‘; {如果修改工程标题...}
ShowMessage(‘提示内容‘); {标题是‘警告‘}
ShowMessage(‘第一行‘ + #13#10 + ‘第二行‘); {提示信息换行}
ShowMessage(‘第一行‘#13‘第二行‘); {也可以}
end;
--------------------------------------------------------------------------------
//InputBox:
var
s: string;
begin
s := InputBox(‘标题‘,‘提示信息‘,‘默认输入‘);
ShowMessage(s); //显示输入的内容
end;
--------------------------------------------------------------------------------
//InputQuery:
var
s: string;
begin
InputQuery(‘标题‘,‘提示信息‘,s); //为字符串变量 S 输入值, 返回布尔型
ShowMessage(s); //显示输入的内容
end;
--------------------------------------------------------------------------------
//MessageBox:
var
i: Integer;
begin
i := MessageBox(0,‘提示内容‘,‘标题‘,mrOk); //第一个参数一般用 Self.Handle, 0代表桌面
//可选参数
//mrNone
//mrOk
//mrCancel
//mrAbort
//mrRetry
//mrIgnore
//mrYes
//mrNo
//mrAll
//mrNoToAll
//mrYesToAll
ShowMessage(IntToStr(i));
//还可以组合第四个参数以调用不同的图标:
MessageBox(0,‘提示内容‘,‘标题‘,mrOk + MB_ICONHAND);
//MB_ICONHAND
//MB_ICONQUESTION
//MB_ICONEXCLAMATION
//MB_ICONASTERISK
//MB_USERICON
//MB_ICONWARNING
//MB_ICONERROR
//MB_ICONINFORMATION
//MB_ICONSTOP
end;
//后来补充, 还是应该使用 API 的原有参数更好些:
{可选参数或它们的组合}
MB_OK = $00000000;
MB_OKCANCEL = $00000001;
MB_ABORTRETRYIGNORE = $00000002;
MB_YESNOCANCEL = $00000003;
MB_YESNO = $00000004;
MB_RETRYCANCEL = $00000005;
MB_ICONHAND = $00000010;
MB_ICONQUESTION = $00000020;
MB_ICONEXCLAMATION = $00000030;
MB_ICONASTERISK = $00000040;
MB_USERICON = $00000080;
MB_ICONWARNING = MB_ICONEXCLAMATION;
MB_ICONERROR = MB_ICONHAND;
MB_ICONINFORMATION = MB_ICONASTERISK;
MB_ICONSTOP = MB_ICONHAND;
MB_DEFBUTTON1 = $00000000;
MB_DEFBUTTON2 = $00000100;
MB_DEFBUTTON3 = $00000200;
MB_DEFBUTTON4 = $00000300;
MB_APPLMODAL = $00000000;
MB_SYSTEMMODAL = $00001000;
MB_TASKMODAL = $00002000;
MB_HELP = $00004000;
MB_NOFOCUS = $00008000;
MB_SETFOREGROUND = $00010000;
MB_DEFAULT_DESKTOP_ONLY = $00020000;
MB_TOPMOST = $00040000;
MB_RIGHT = $00080000;
MB_RTLREADING = $00100000;
MB_SERVICE_NOTIFICATION = $00200000;
MB_SERVICE_NOTIFICATION_NT3X = $00040000;
MB_TYPEMASK = $0000000F;
MB_ICONMASK = $000000F0;
MB_DEFMASK = $00000F00;
MB_MODEMASK = $00003000;
MB_MISCMASK = $0000C000;
{可能的返回值}
IDOK = 1; ID_OK = IDOK;
IDCANCEL = 2; ID_CANCEL = IDCANCEL;
IDABORT = 3; ID_ABORT = IDABORT;
IDRETRY = 4; ID_RETRY = IDRETRY;
IDIGNORE = 5; ID_IGNORE = IDIGNORE;
IDYES = 6; ID_YES = IDYES;
IDNO = 7; ID_NO = IDNO;
IDCLOSE = 8; ID_CLOSE = IDCLOSE;
IDHELP = 9; ID_HELP = IDHELP;
IDTRYAGAIN = 10;
IDCONTINUE = 11;
--------------------------------------------------------------------------------
//MessageDlg:
var
i: Integer;
begin
MessageDlg(‘提示信息‘,mtWarning,mbYesNo,0);
//第二个参数调用不同的图标:
//mtWarning
//mtError
//mtInformation
//mtConfirmation
//mtCustom
//第三个参数调用不同的按钮:
//mbYesNo = [mbYes, mbNo];
//mbYesNoCancel = [mbYes, mbNo, mbCancel];
//mbYesAllNoAllCancel = [mbYes, mbYesToAll, mbNo, mbNoToAll, mbCancel];
//mbOKCancel = [mbOK, mbCancel];
//mbAbortRetryIgnore = [mbAbort, mbRetry, mbIgnore];
//mbAbortIgnore = [mbAbort, mbIgnore];
//可以直接输入集合元素,譬如: MessageDlg(‘aaa‘,mtWarning,[mbYes],1);
//第四个参数帮助ID, 没有添0
//还有重载的第5个参数是设定默认按钮
//如果要本地话显示需要修改源文件, 一般可以用 MessageBox 代替
end;
--------------------------------------------------------------------------------
//MessageDlgPos:
begin
MessageDlgPos(‘提示信息‘,mtCustom,mbYesNoCancel,0,400,100);
//比 MessageDlg 多出两个参数来控制显示位置
end;
以上是关于delphi弹出信息框大全的主要内容,如果未能解决你的问题,请参考以下文章