unzip.h.227

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了unzip.h.227相关的知识,希望对你有一定的参考价值。

#ifndef _unzip_H #define _unzip_H // #ifdef ZIP_STD #include <time.h> #define DECLARE_HANDLE(name) struct name##__ { int unused; }; typedef struct name##__ *name #ifndef MAX_PATH #define MAX_PATH 1024 #endif typedef unsigned long DWORD; typedef char TCHAR; typedef FILE* HANDLE; typedef time_t FILETIME; #endif

// UNZIPPING functions -- for unzipping. // This file is a repackaged form of extracts from the zlib code available // at www.gzip.org/zlib, by Jean-Loup Gailly and Mark Adler. The original // copyright notice may be found in unzip.cpp. The repackaging was done // by Lucian Wischik to simplify and extend its use in Windows/C++. Also // encryption and unicode filenames have been added.

#ifndef _zip_H DECLARE_HANDLE(HZIP); #endif // An HZIP identifies a zip file that has been opened

typedef DWORD ZRESULT; // return codes from any of the zip functions. Listed later.

typedef struct { int index;                 // index of this file within the zip   TCHAR name[MAX_PATH];      // filename within the zip   DWORD attr;                // attributes, as in GetFileAttributes.   FILETIME atime,ctime,mtime;// access, create, modify filetimes   long comp_size;            // sizes of item, compressed and uncompressed. These   long unc_size;             // may be -1 if not yet known (e.g. being streamed in) } ZIPENTRY;

HZIP OpenZip(const TCHAR *fn, const char *password); HZIP OpenZip(void *z,unsigned int len, const char *password); HZIP OpenZipHandle(HANDLE h, const char *password); // OpenZip - opens a zip file and returns a handle with which you can // subsequently examine its contents. You can open a zip file from: // from a pipe:             OpenZipHandle(hpipe_read,0); // from a file (by handle): OpenZipHandle(hfile,0); // from a file (by name):   OpenZip("c:\\test.zip","password"); // from a memory block:     OpenZip(bufstart, buflen,0); // If the file is opened through a pipe, then items may only be // accessed in increasing order, and an item may only be unzipped once, // although GetZipItem can be called immediately before and after unzipping // it. If it‘s opened in any other way, then full random access is possible. // Note: pipe input is not yet implemented. // Note: zip passwords are ascii, not unicode. // Note: for windows-ce, you cannot close the handle until after CloseZip. // but for real windows, the zip makes its own copy of your handle, so you // can close yours anytime.

ZRESULT GetZipItem(HZIP hz, int index, ZIPENTRY *ze); // GetZipItem - call this to get information about an item in the zip. // If index is -1 and the file wasn‘t opened through a pipe, // then it returns information about the whole zipfile // (and in particular ze.index returns the number of index items). // Note: the item might be a directory (ze.attr & FILE_ATTRIBUTE_DIRECTORY) // See below for notes on what happens when you unzip such an item. // Note: if you are opening the zip through a pipe, then random access // is not possible and GetZipItem(-1) fails and you can‘t discover the number // of items except by calling GetZipItem on each one of them in turn, // starting at 0, until eventually the call fails. Also, in the event that // you are opening through a pipe and the zip was itself created into a pipe, // then then comp_size and sometimes unc_size as well may not be known until // after the item has been unzipped.

ZRESULT FindZipItem(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRY *ze); // FindZipItem - finds an item by name. ic means ‘insensitive to case‘. // It returns the index of the item, and returns information about it. // If nothing was found, then index is set to -1 and the function returns // an error code.

ZRESULT UnzipItem(HZIP hz, int index, const TCHAR *fn); ZRESULT UnzipItem(HZIP hz, int index, void *z,unsigned int len); ZRESULT UnzipItemHandle(HZIP hz, int index, HANDLE h); // UnzipItem - given an index to an item, unzips it. You can unzip to: // to a pipe:             UnzipItemHandle(hz,i, hpipe_write); // to a file (by handle): UnzipItemHandle(hz,i, hfile); // to a file (by name):   UnzipItem(hz,i, ze.name); // to a memory block:     UnzipItem(hz,i, buf,buflen); // In the final case, if the buffer isn‘t large enough to hold it all, // then the return code indicates that more is yet to come. If it was // large enough, and you want to know precisely how big, GetZipItem. // Note: zip files are normally stored with relative pathnames. If you // unzip with ZIP_FILENAME a relative pathname then the item gets created // relative to the current directory - it first ensures that all necessary // subdirectories have been created. Also, the item may itself be a directory. // If you unzip a directory with ZIP_FILENAME, then the directory gets created. // If you unzip it to a handle or a memory block, then nothing gets created // and it emits 0 bytes. ZRESULT SetUnzipBaseDir(HZIP hz, const TCHAR *dir); // if unzipping to a filename, and it‘s a relative filename, then it will be relative to here. // (defaults to current-directory).

ZRESULT CloseZip(HZIP hz); // CloseZip - the zip handle must be closed with this function.

unsigned int FormatZipMessage(ZRESULT code, TCHAR *buf,unsigned int len); // FormatZipMessage - given an error code, formats it as a string. // It returns the length of the error message. If buf/len points // to a real buffer, then it also writes as much as possible into there.

// These are the result codes: #define ZR_OK         0x00000000     // nb. the pseudo-code zr-recent is never returned, #define ZR_RECENT     0x00000001     // but can be passed to FormatZipMessage. // The following come from general system stuff (e.g. files not openable) #define ZR_GENMASK    0x0000FF00 #define ZR_NODUPH     0x00000100     // couldn‘t duplicate the handle #define ZR_NOFILE     0x00000200     // couldn‘t create/open the file #define ZR_NOALLOC    0x00000300     // failed to allocate some resource #define ZR_WRITE      0x00000400     // a general error writing to the file #define ZR_NOTFOUND   0x00000500     // couldn‘t find that file in the zip #define ZR_MORE       0x00000600     // there‘s still more data to be unzipped #define ZR_CORRUPT    0x00000700     // the zipfile is corrupt or not a zipfile #define ZR_READ       0x00000800     // a general error reading the file #define ZR_PASSWORD   0x00001000     // we didn‘t get the right password to unzip the file // The following come from mistakes on the part of the caller #define ZR_CALLERMASK 0x00FF0000 #define ZR_ARGS       0x00010000     // general mistake with the arguments #define ZR_NOTMMAP    0x00020000     // tried to ZipGetMemory, but that only works on mmap zipfiles, which yours wasn‘t #define ZR_MEMSIZE    0x00030000     // the memory size is too small #define ZR_FAILED     0x00040000     // the thing was already failed when you called this function #define ZR_ENDED      0x00050000     // the zip creation has already been closed #define ZR_MISSIZE    0x00060000     // the indicated input file size turned out mistaken #define ZR_PARTIALUNZ 0x00070000     // the file had already been partially unzipped #define ZR_ZMODE      0x00080000     // tried to mix creating/opening a zip // The following come from bugs within the zip library itself #define ZR_BUGMASK    0xFF000000 #define ZR_NOTINITED  0x01000000     // initialisation didn‘t work #define ZR_SEEK       0x02000000     // trying to seek in an unseekable file #define ZR_NOCHANGE   0x04000000     // changed its mind on storage, but not allowed #define ZR_FLATE      0x05000000     // an internal error in the de/inflation code

 

 

// e.g. // // SetCurrentDirectory("c:\\docs\\stuff"); // HZIP hz = OpenZip("c:\\stuff.zip",0); // ZIPENTRY ze; GetZipItem(hz,-1,&ze); int numitems=ze.index; // for (int i=0; i<numitems; i++) // { GetZipItem(hz,i,&ze); //   UnzipItem(hz,i,ze.name); // } // CloseZip(hz); // // // HRSRC hrsrc = FindResource(hInstance,MAKEINTRESOURCE(1),RT_RCDATA); // HANDLE hglob = LoadResource(hInstance,hrsrc); // void *zipbuf=LockResource(hglob); // unsigned int ziplen=SizeofResource(hInstance,hrsrc); // HZIP hz = OpenZip(zipbuf, ziplen, 0); //   - unzip to a membuffer - // ZIPENTRY ze; int i; FindZipItem(hz,"file.dat",true,&i,&ze); // char *ibuf = new char[ze.unc_size]; // UnzipItem(hz,i, ibuf, ze.unc_size); // delete[] ibuf; //   - unzip to a fixed membuff - // ZIPENTRY ze; int i; FindZipItem(hz,"file.dat",true,&i,&ze); // char ibuf[1024]; ZRESULT zr=ZR_MORE; unsigned long totsize=0; // while (zr==ZR_MORE) // { zr = UnzipItem(hz,i, ibuf,1024); //   unsigned long bufsize=1024; if (zr==ZR_OK) bufsize=ze.unc_size-totsize; //   totsize+=bufsize; // } //   - unzip to a pipe - // HANDLE hwrite; HANDLE hthread=CreateWavReaderThread(&hwrite); // int i; ZIPENTRY ze; FindZipItem(hz,"sound.wav",true,&i,&ze); // UnzipItemHandle(hz,i, hwrite); // CloseHandle(hwrite); // WaitForSingleObject(hthread,INFINITE); // CloseHandle(hwrite); CloseHandle(hthread); //   - finished - // CloseZip(hz); // // note: no need to free resources obtained through Find/Load/LockResource // // // SetCurrentDirectory("c:\\docs\\pipedzipstuff"); // HANDLE hread,hwrite; CreatePipe(&hread,&hwrite,0,0); // CreateZipWriterThread(hwrite); // HZIP hz = OpenZipHandle(hread,0); // for (int i=0; ; i++) // { ZIPENTRY ze; //   ZRESULT zr=GetZipItem(hz,i,&ze); if (zr!=ZR_OK) break; // no more //   UnzipItem(hz,i, ze.name); // } // CloseZip(hz); // //

 

// Now we indulge in a little skullduggery so that the code works whether // the user has included just zip or both zip and unzip. // Idea: if header files for both zip and unzip are present, then presumably // the cpp files for zip and unzip are both present, so we will call // one or the other of them based on a dynamic choice. If the header file // for only one is present, then we will bind to that particular one. ZRESULT CloseZipU(HZIP hz); unsigned int FormatZipMessageU(ZRESULT code, TCHAR *buf,unsigned int len); bool IsZipHandleU(HZIP hz); #ifdef _zip_H #undef CloseZip #define CloseZip(hz) (IsZipHandleU(hz)?CloseZipU(hz):CloseZipZ(hz)) #else #define CloseZip CloseZipU #define FormatZipMessage FormatZipMessageU #endif

 

#endif // _unzip_H

以上是关于unzip.h.227的主要内容,如果未能解决你的问题,请参考以下文章

在dos下无法使用unzip命令,提示‘unzip’不是内部命令或外部命令,是怎么回事?如何才能使用unzip?

如何用unzip一次解压多个.zip文件 三种方法

unzip:unzip解压文件到指定目录

Centos7下unzip解压报错问题

嵌入式Linux上移植unzip工具

unzip解压中文乱码