day9:vcp考试

Posted 2020-09-19 bai_nian_min_guo

Q161. An administrator wants to select a Host Power Management Policy for an ESXi 6.x host that will disable most
hardware power management features.
Which Host Power Management Policy should be selected to meet this requirement?
A. High Performance
B. Balanced
C. Low Power
D. Disabled

 

 

Q162. An administrator wants to monitor virtual machines on a host and send notifications when memory usage
reaches 80%.
What should the administrator create in vCenter Server to accomplish this?
A. A host alarm that will monitor virtual machine memory usage and set a trigger to email the notification.
B. A vCenter Server alarm that will monitor virtual machine memory usage and set an action to email the notification.
C. A host alarm that will monitor virtual machine memory usage and set an action to email the notification.
D. A vCenter Server alarm that will monitor virtual machine memory usage and set a trigger to email the notification.

 

Q163. What is the name of the High Availability agent log?
A. fdm.log
B. ha.log
C. vpxa.log
D. aam.log

 

 

Q164. An administrator is attempting to enable Legacy Fault Tolerance (FT) on a virtual machine and observes the
following in the vSphere Web Client:
Fault Tolerance has not been licensed on host <hostname>.
What is the minimum licensed edition that supports this configuration?
A. Standard
B. Enterprise
C. Enterprise Plus
D. Essentials Plus

 

 

Q165. An administrator is attempting to enable Fault Tolerance on a virtual machine with 4 vCPUs and observes the
following in the vSphere Web Client:
Fault Tolerance has not been licensed on host <hostname>.
What is the minimum licensed edition that supports this configuration?
A. Enterprise
B. Enterprise Plus
C. Standard
D. Essentials Plus

 

 

Q166. When attempting to place a datastore in Maintenance Mode, the task remains at 1%.
What are two potential causes for this? (Choose two.)
A. Storage DRS is disabled on one or more virtual machine(s) disk(s).
B. Storage DRS rules prevent migration recommendations for the disk.
C. Storage DRS datastores have insufficient space to accommodate failover.
D. Storage DRS provisioning network has been limited with I/O control policies.

 

 

Q167. What are two likely causes for a DRS cluster to become unbalanced? (Choose two.)
A. Migration threshold is too low.
B. Affinity rules are preventing virtual machines from being moved.
C. A device is mounted to a virtual machine preventing vMotion.
D. Migration cost is too low.

 

 

Q168. Which two scenarios would cause a Fault Tolerance-enabled virtual machine to fail to power the Secondary
virtual machine? (Choose two.)
A. The host has entered a Network Partitioned state.
B. vSphere High Availability (HA) is disabled on the host cluster.
C. Enhanced vMotion Compatibility (EVC) is enabled on the host cluster.
D. vSphere Distributed Power Management (DPM) is enabled on the host cluster.

 

 

 

Q169. Refer to the Exhibit.
An administrator is reviewing a vSphere Distributed Resource Scheduler (DRS) enabled Cluster and observes
unexpected behavior as shown in the Exhibit.
What are three potential causes of the cluster imbalance? (Choose three.)
A. A local device is mounted to one or more virtual machines.
B. DRS rules prevent virtual machines from being moved.
C. vMotion is not configured and enabled.
D. There are insufficient cluster resources to perform the migration.
E. DRS has been configured for a conservative migration threshold.

 

 

Q170. Refer to the Exhibit.
An administrator receives the error message shown in the Exhibit.
Which two actions can be taken to clear the warning? (Choose two.)
A. Add a Virtual SAN datastore and configure it for High Availability heartbeating.
B. Set the advanced High Availability parameter Das.heartbeatdsperhost to 1.
C. Set the advanced High Availability parameter Das.ignoreInsufficientHbDatastore to true.
D. Add a shared datastore and reconfigure High Availability.

 

Q171. Refer to the Exhibit.
An administrator wants to increase the capacity of a VMFS5 datastore; but the Increase Size by slider is not available,
as shown in the Exhibit.
How should the administrator resolve this problem?
A. Select a valid partition configuration from the drop-down menu.
B. Use fdisk utility to manually resize the partition.
C. Use the mouse to resize the partition indicated in the Partition Layout.
D. Clicking Next will prompt for available usable space.

 

Q172. Refer to the Exhibit.
An administrator is troubleshooting intermittent poor performance of virtual machines in a vSphere
6.x cluster. Investigating esxtop data shows that the only statistic that stands out is %CSTP as depicted in Exhibit 1:
The administrator proceeds to switch to the Power Management screen and observes the data depicted in Exhibit 2:
Based on the information in the exhibits, which two configurations are probable causes of the poor performance?
(Choose two.)
A. The active power policy is set to Low Power.
B. The host has active Sleep States configured in the BIOS.
C. The active power policy is set to High Performance.
D. The host has active Power States configured in the BIOS.

 

 

Q173. An administrator has recently configured HA on a cluster. After reviewing the summary tab on one of the hosts,
the warning in Exhibit 1 is displayed:
The administrator proceeds to view the management network port group data shown in Exhibit 2:
The administrator then views the management network vSwitch as shown in Exhibit 3:
Based on the exhibits, which two steps should be taken to ensure redundancy on the management network? (Choose
two.)
A. Move vmnic1 to Standby adapters.
B. Add an additional vmknic to the Network Adapters and move it to Active adapters.
C. Set the advanced HA configuration parameter das.ignoreRedundantNetWarning to True.
D. Uncheck the Override Failover Checkbox on the management network port group.

 

 

Q174. Refer to the Exhibit.
The Exhibit shows the status of vmhba32 and vmhba33 as Unbound.
What is a likely reason for this status?
A. The host bus adapter is not associated with a vmknic.
B. The Dynamic Target Discovery was not configured.
C. The Static Target Discovery was not configured.
D. The host bus adapter is not associated with a vmnic

 

 

Q175. Refer to the Exhibit.
Review the Exhibit. An administrator has configured permissions for a group called VMGroup and a user named
VMUser. A new Role has been created called PowerVM. The group and role have these charecteristics:
- PowerVM role can power on VMs
- VMGroup granted PowerVM role on VMFolder
- VMUser is a member of VMGroup
- VMUser granted No Access on VMFolder
Based on the exhibit, which statement best explains why VMUser is denied access to the VMFolder?
A. The VMUser permission overrides the VMGroup permission.
B. The No Access role overrides the PowerVM role.
C. The VMGroup permission overrides the VMUser permission.
D. The PowerVM role overrides the No Access role.

 

 

Q176. Refer to the Exhibit.
An administrator receives an error on a vSphere cluster as shown in the Exhibit.
Based on the exhibit, which three configuration changes can resolve the error? (Choose three.)
A. Change the Admission Control policy for the cluster.
B. Adjust CPU and Memory reservations of the virtual machines.
C. Increase the amount of failover resources in the cluster.
D. Reconfigure the ESXi host cluster for High Availability.
E. Disable Virtual Machine Monitoring.

 

Q177. An administrator is upgrading an ESXi host from 5.5 to 6.0 and runs the following command:
esxcli software vib list 璻 ebooting-image
What does this command show?
A. VIBs active after a reboot.
B. VIBs that require a reboot.
C. VIBs that are in the boot image.
D. VIBs that are third-party.

 

 

Q178. Refer to the Exhibit.
An administrator receives vRealize Operations alerts for the Health of the virtual machine PVMAPP_0 as shown in
Exhibit 1:
The administrator clicks on the Analysis pane, as shown in Exhibit 2:

Based on the exhibits, what action would correctly address the performance problems observed?
A. Increase the number of vCPUs for PVMAPP_0.
B. Increase the allocation of memory for PVMAPP_0.
C. Increase the Memory limit for PVMAPP_0.
D. Increase the reservation in MHz for vCPUs for PVMAPP_0

 

 

Q179. Which two identification sources can a vSphere Auto Deploy rule use to identify target hosts? (Choose two.)
A. Processor Serial Number
B. Security Identifier
C. SMBIOS information
D. BIOS UUID

 

 

Q180. An administrator has decided to create 10 ESXi 6.x hosts via Auto Deploy for a new Test/Dev cluster. The hosts
are configured to obtain their networking configuration via DHCP.
Which Direct Console User Interface option should the administrator use to renew the DHCP lease for the hosts?
A. Restore Network Settings
B. Test Management Network
C. Restart Management Network
D. Network Restore Options