Zookeeper集群及配置

Posted 2020-09-18 知行合一

特别提示：本人博客部分有参考网络其他博客，但均是本人亲手编写过并验证通过。如发现博客有错误，请及时提出以免误导其他人，谢谢！欢迎转载，但记得标明文章出处：http://www.cnblogs.com/mao2080/

原理

ZooKeeper是以Fast Paxos算法为基础的，Paxos 算法存在活锁的问题，即当有多个proposer交错提交时，有可能互相排斥导致没有一个proposer能提交成功，而Fast Paxos作了一些优化，通过选举产生一个leader (领导者)，只有leader才能提交proposer，具体算法可见Fast Paxos。因此，要想弄懂ZooKeeper首先得对Fast Paxos有所了解。
ZooKeeper的基本运转流程：
1、选举Leader。
2、同步数据。
3、选举Leader过程中算法有很多，但要达到的选举标准是一致的。
4、Leader要具有最高的执行ID，类似root权限。
5、集群中大多数的机器得到响应并follow选出的Leader。

本文将zookeeper在同一台服务器上做一个伪集群部署（实际生产环境不会这样部署），zookeeper有个特性就是节点一般是部署单数(3，5，7，9。。。)具体访问量来权衡，节点down掉一半才算zookeeper服务down掉。

1、下载地址

http://apache.fayea.com/zookeeper/

2、解压安装

1、使用cd命令进入/usr/local/application/zookeeper目录，并上传下载好的zookeeper-3.4.6.tar.gz至安装目录，分别解压移动至zookeeper2181、zookeeper2182、zookeeper2183。

tar -zxvf zookeeper-3.4.6.tar.gz
mv zookeeper-3.4.6 zookeeper2181

tar -zxvf zookeeper-3.4.6.tar.gz
mv zookeeper-3.4.6 zookeeper2182

tar -zxvf zookeeper-3.4.6.tar.gz
mv zookeeper-3.4.6 zookeeper2183

rm -rf zookeeper-3.4.6.tar.gz

3、修改配置

1、修改zookeeper2181/conf/zoo_sample.cfg文件名称为zoo.cfg，并修改红色配置：

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.

  dataDir=/usr/local/application/zookeeper/zookeeper2181/data
  dataLogDir=/usr/local/application/zookeeper/zookeeper2181/logs

# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
server.1=192.168.1.11:4000:5000
server.2=192.168.1.11:4000:5000
server.3=192.168.1.11:4000:5000

2、修改zookeeper2182/conf/zoo_sample.cfg文件名称为zoo.cfg，并修改红色配置：

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=/usr/local/application/zookeeper/zookeeper2182/data
dataLogDir=/usr/local/application/zookeeper/zookeeper2182/logs
# the port at which the clients will connect
clientPort=2182
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
server.1=192.168.1.11:4000:5000
server.2=192.168.1.11:4000:5000
server.3=192.168.1.11:4000:5000

3、修改zookeeper2183/conf/zoo_sample.cfg文件名称为zoo.cfg，并修改红色配置：

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.

  dataDir=/usr/local/application/zookeeper/zookeeper2181/data
　dataLogDir=/usr/local/application/zookeeper/zookeeper2181/logs

# the port at which the clients will connect
clientPort=2183
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1
server.1=192.168.1.11:4000:5000
server.2=192.168.1.11:4000:5000
server.3=192.168.1.11:4000:5000

4、修改zookeeper2181配置，依次执行下面命令

cd zookeeper2181
mkdir data logs
cd data
vi myid(首先输入字母i进入编辑模式，修改myid内容1，这个1与zoo.cfg文件里的server.1对应（具体服务器是多少就输入多少）)

5、修改zookeeper2182配置，依次执行下面命令

cd zookeeper2182
mkdir data logs
cd data
vi myid(首先输入字母i进入编辑模式，修改myid内容2，这个2与zoo.cfg文件里的server.2对应（具体服务器是多少就输入多少）)

6、修改zookeeper2183配置，依次执行下面命令

cd zookeeper2183
mkdir data logs
cd data
vi myid(首先输入字母i进入编辑模式，修改myid内容3，这个3与zoo.cfg文件里的server.3对应（具体服务器是多少就输入多少）)

4、启动服务

1、启动zookeeper2181服务，进入bin目录，输入命令：./zkServer.sh start

[root@localhost zookeeper2181]# cd bin
[root@localhost bin]# ./zkServer.sh start
JMX enabled by default
Using config: /usr/local/application/zookeeper/zookeeper2181/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
[root@localhost bin]# 

2、启动zookeeper2182服务，进入bin目录，输入命令：./zkServer.sh start

[root@localhost zookeeper2182]# cd bin
[root@localhost bin]# ./zkServer.sh start
JMX enabled by default
Using config: /usr/local/application/zookeeper/zookeeper2182/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
[root@localhost bin]# 

3、启动zookeeper2183服务，进入bin目录，输入命令：./zkServer.sh start

[root@localhost zookeeper2183]# cd bin
[root@localhost bin]# ./zkServer.sh start
JMX enabled by default
Using config: /usr/local/application/zookeeper/zookeeper2183/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED
[root@localhost bin]# 

4、查看服务，进入bin目录使用命令：./zkServer.sh status，发现自动选举了leader。

[root@localhost bin]# ./zkServer.sh status
JMX enabled by default
Using config: /usr/local/application/zookeeper/zookeeper2183/bin/../conf/zoo.cfg
Mode: leader
[root@localhost bin]# cd /usr/local/application/zookeeper/zookeeper2181/bin
[root@localhost bin]# ./zkServer.sh status
JMX enabled by default
Using config: /usr/local/application/zookeeper/zookeeper2181/bin/../conf/zoo.cfg
Mode: follower
[root@localhost bin]# cd /usr/local/application/zookeeper/zookeeper2182/bin
[root@localhost bin]# ./zkServer.sh status
JMX enabled by default
Using config: /usr/local/application/zookeeper/zookeeper2182/bin/../conf/zoo.cfg
Mode: follower

5、常用命令

启动服务：./zkServer.sh start （需要进入bin目录）

停止服务：./zkServer.sh stop （需要进入bin目录）

重启服务：./zkServer.sh restart （需要进入bin目录）

查看状态：./zkServer.sh status （需要进入bin目录）