Centos7 之安装Logstash ELK stack 日志管理系统
Posted
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了Centos7 之安装Logstash ELK stack 日志管理系统相关的知识，希望对你有一定的参考价值。
一、介绍
The Elastic Stack - 它不是一个软件，而是Elasticsearch，Logstash，Kibana 开源软件的集合，对外是作为一个日志管理系统的开源方案。它可以从任何来源，任何格式进行日志搜索，分析获取数据，并实时进行展示。像盾牌（安全），监护者（警报）和Marvel（监测）一样为你的产品提供更多的可能。
Elasticsearch：搜索，提供分布式全文搜索引擎
Logstash: 日志收集，管理，存储
Kibana ：日志的过滤web 展示
Filebeat：监控日志文件、转发
二、测试环境规划图
环境：ip、主机名按照如上规划，系统已经 update. 所有主机时间一致。防火墙测试环境已关闭。下面是这次elk学习的部署安装
目的：通过elk 主机收集监控主要server的系统日志、以及线上应用服务日志。
三、Elasticsearch+Logstash+Kibana的安装（在 elk.test.com 上进行操作）
3.1.基础环境检查
[[email protected] ~]# hostnameelk.test.com [[email protected] ~]# cat /etc/hosts127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6192.168.30.67 elk.test.com192.168.30.99 rsyslog.test.com192.168.30.64 nginx.test.com
3.2.软件包
[[email protected] ~]# cd elk/ [[email protected] elk]# wget -c https://download.elastic.co/elasticsearch/release/org/elasticsearch/distribution/rpm/elasticsearch/2.3.3/elasticsearch-2.3.3.rpm[[email protected] elk]# wget -c https://download.elastic.co/logstash/logstash/packages/centos/logstash-2.3.2-1.noarch.rpm[[email protected] elk]# wget https://download.elastic.co/kibana/kibana/kibana-4.5.1-1.x86_64.rpm[[email protected] elk]# wget -c https://download.elastic.co/beats/filebeat/filebeat-1.2.3-x86_64.rpm
3.3.检查
[[email protected] elk]# lselasticsearch-2.3.3.rpm filebeat-1.2.3-x86_64.rpm kibana-4.5.1-1.x86_64.rpm logstash-2.3.2-1.noarch.rpm
服务器只需要安装e、l、k, 客户端只需要安装filebeat。
3.4.安装elasticsearch，先安装jdk，elk server 需要java 开发环境支持，由于客户端上使用的是filebeat软件，它不依赖java环境，所以不需要安装。
[[email protected] elk]# yum install java-1.8.0-openjdk -y
安装es
[[email protected] elk]# localinstall elasticsearch-..rpm -y ..... Installing : elasticsearch-.-.noarch /### NOT starting on installation, please execute the following statements to configure elasticsearch service to start automatically using systemd systemctl daemon-reload systemctl enable elasticsearch.service ### You can start elasticsearch service by executing systemctl start elasticsearch.service Verifying : elasticsearch-.-.noarch /Installed: elasticsearch.noarch :.-
重新载入 systemd，扫描新的或有变动的单元；启动并加入开机自启动
[[email protected] elk]# systemctl daemon-reload [[email protected] elk]# systemctl enable elasticsearch Created symlink from /etc/systemd/system/multi-user.target.wants/elasticsearch.service to /usr/lib/systemd/system/elasticsearch.service. [[email protected] elk]# systemctl start elasticsearch [[email protected] elk]# systemctl status elasticsearch ● elasticsearch.service - Elasticsearch Loaded: loaded (/usr/lib/systemd/system/elasticsearch.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2016-05-20 15:38:35 CST; 12s ago Docs: http://www.elastic.co Process: 10428 ExecStartPre=/usr/share/elasticsearch/bin/elasticsearch-systemd-pre-exec (code=exited, status=0/SUCCESS) Main PID: 10430 (java) CGroup: /system.slice/elasticsearch.service └─10430 /bin/java -Xms256m -Xmx1g -Djava.awt.headless=true -XX:+UseParNewGC -XX:+UseConcMarkSweepGC -XX:CMSInitiatingOccupancy... May 20 15:38:38 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:38,279][INFO ][env ] [James Howlett] heap...[true] May 20 15:38:38 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:38,279][WARN ][env ] [James Howlett] max ...65536] May 20 15:38:41 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:41,726][INFO ][node ] [James Howlett] initialized May 20 15:38:41 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:41,726][INFO ][node ] [James Howlett] starting ... May 20 15:38:41 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:41,915][INFO ][transport ] [James Howlett] publ...:9300} May 20 15:38:41 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:41,920][INFO ][discovery ] [James Howlett] elas...xx35hw May 20 15:38:45 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:45,099][INFO ][cluster.service ] [James Howlett] new_...eived) May 20 15:38:45 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:45,164][INFO ][gateway ] [James Howlett] reco..._state May 20 15:38:45 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:45,185][INFO ][http ] [James Howlett] publ...:9200} May 20 15:38:45 elk.test.com elasticsearch[10430]: [2016-05-20 15:38:45,185][INFO ][node ] [James Howlett] started Hint: Some lines were ellipsized, use -l to show in full.
检查服务
[[email protected] elk]# rpm -qc elasticsearch /etc/elasticsearch/elasticsearch.yml /etc/elasticsearch/logging.yml /etc/init.d/elasticsearch /etc/sysconfig/elasticsearch /usr/lib/sysctl.d/elasticsearch.conf /usr/lib/systemd/system/elasticsearch.service /usr/lib/tmpfiles.d/elasticsearch.conf [[email protected] elk]# netstat -nltp | grep java tcp6 0 0 127.0.0.1:9200 :::* LISTEN 10430/java tcp6 0 0 ::1:9200 :::* LISTEN 10430/java tcp6 0 0 127.0.0.1:9300 :::* LISTEN 10430/java tcp6 0 0 ::1:9300 :::* LISTEN 10430/java
修改防火墙，将9200、9300 端口对外开放
[[email protected] elk]# firewall-cmd --permanent --add-port={9200/tcp,9300/tcp} success [[email protected] elk]# firewall-cmd --reload success [[email protected] elk]# firewall-cmd --list-all public (default, active) interfaces: eno16777984 eno33557248 sources: services: dhcpv6-client ssh ports: 9200/tcp 9300/tcp masquerade: no forward-ports: icmp-blocks: rich rules:
3.5 安装kibana
[[email protected] elk]# yum localinstall kibana-4.5.1-1.x86_64.rpm –y [[email protected] elk]# systemctl enable kibana Created symlink from /etc/systemd/system/multi-user.target.wants/kibana.service to /usr/lib/systemd/system/kibana.service. [[email protected] elk]# systemctl start kibana [[email protected] elk]# systemctl status kibana ● kibana.service - no description given Loaded: loaded (/usr/lib/systemd/system/kibana.service; enabled; vendor preset: disabled) Active: active (running) since Fri 2016-05-20 15:49:02 CST; 20s ago Main PID: 11260 (node) CGroup: /system.slice/kibana.service └─11260 /opt/kibana/bin/../node/bin/node /opt/kibana/bin/../src/cli May 20 15:49:05 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:05+00:00","tags":["status","plugin:elasticsearch...May 20 15:49:05 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:05+00:00","tags":["status","plugin:kbn_vi...lized"} May 20 15:49:05 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:05+00:00","tags":["status","plugin:markdo...lized"} May 20 15:49:05 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:05+00:00","tags":["status","plugin:metric...lized"} May 20 15:49:05 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:05+00:00","tags":["status","plugin:spyMod...lized"} May 20 15:49:05 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:05+00:00","tags":["status","plugin:status...lized"} May 20 15:49:05 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:05+00:00","tags":["status","plugin:table_...lized"} May 20 15:49:05 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:05+00:00","tags":["listening","info"],"pi...:5601"} May 20 15:49:10 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:10+00:00","tags":["status","plugin:elasticsearch...May 20 15:49:14 elk.test.com kibana[11260]: {"type":"log","@timestamp":"2016-05-20T07:49:14+00:00","tags":["status","plugin:elasti...found"} Hint: Some lines were ellipsized, use -l to show in full.
检查kibana服务运行（Kibana默认 进程名：node ，端口5601）
[[email protected] elk]# netstat -nltp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 909/sshd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1595/master tcp 0 0 0.0.0.0:5601 0.0.0.0:* LISTEN 11260/node
修改防火墙，对外开放tcp/5601
[[email protected] elk]# firewall-cmd --permanent --add-port=5601/tcp Success [[email protected] elk]# firewall-cmd --reload success [[email protected] elk]# firewall-cmd --list-all public (default, active) interfaces: eno16777984 eno33557248 sources: services: dhcpv6-client ssh ports: 9200/tcp 9300/tcp 5601/tcp masquerade: no forward-ports: icmp-blocks: rich rules:
这时，我们可以打开浏览器，测试访问一下kibana服务器http://192.168.30.67:5601/，确认没有问题，如下图：
在这里，我们可以修改防火墙，将用户访问80端口连接转发到5601上，这样可以直接输入网址不用指定端口了，如下:
[[email protected] elk]# firewall-cmd --permanent --add-forward-port=port=80:proto=tcp:toport=5601[[email protected] elk]# firewall-cmd --reload [[email protected] elk]# firewall-cmd --list-all public (default, active) interfaces: eno16777984 eno33557248 sources: services: dhcpv6-client ssh ports: 9200/tcp 9300/tcp 5601/tcp masquerade: no forward-ports: port=80:proto=tcp:toport=5601:toaddr= icmp-blocks: rich rules:
3.6 安装logstash，以及添加配置文件
[[email protected] elk]# yum localinstall logstash-2.3.2-1.noarch.rpm –y
生成证书
[[email protected] elk]# cd /etc/pki/tls/ [[email protected] tls]# lscert.pem certs misc openssl.cnf private [[email protected] tls]# openssl req -subj ‘/CN=elk.test.com/‘ -x509 -days 3650 -batch -nodes -newkey rsa:2048 -keyout private/logstash-forwarder.key -out certs/logstash-forwarder.crt Generating a 2048 bit RSA private key ...................................................................+++ ......................................................+++ writing new private key to ‘private/logstash-forwarder.key‘-----
之后创建logstash 的配置文件。如下：
View Code
启动logstash，并检查端口，配置文件里，我们写的是5000端口
[[email protected] conf.d]# systemctl start logstash [[email protected] elk]# /sbin/chkconfig logstash on [[email protected] conf.d]# netstat -ntlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 909/sshd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1595/master tcp 0 0 0.0.0.0:5601 0.0.0.0:* LISTEN 11260/node tcp 0 0 0.0.0.0:514 0.0.0.0:* LISTEN 618/rsyslogd tcp6 0 0 :::5000 :::* LISTEN 12819/java tcp6 0 0 :::3306 :::* LISTEN 1270/mysqld tcp6 0 0 127.0.0.1:9200 :::* LISTEN 10430/java tcp6 0 0 ::1:9200 :::* LISTEN 10430/java tcp6 0 0 127.0.0.1:9300 :::* LISTEN 10430/java tcp6 0 0 ::1:9300 :::* LISTEN 10430/java tcp6 0 0 :::22 :::* LISTEN 909/sshd tcp6 0 0 ::1:25 :::* LISTEN 1595/master tcp6 0 0 :::514 :::* LISTEN 618/rsyslogd
修改防火墙，将5000端口对外开放。
[[email protected] ~]# firewall-cmd --permanent --add-port=5000/tcp success [[email protected] ~]# firewall-cmd --reload success [[email protected] ~]# firewall-cmd --list-all public (default, active) interfaces: eno16777984 eno33557248 sources: services: dhcpv6-client ssh ports: 9200/tcp 9300/tcp 5000/tcp 5601/tcp masquerade: no forward-ports: port=80:proto=tcp:toport=5601:toaddr= icmp-blocks: rich rules:
3.7 修改elasticsearch 配置文件
查看目录，创建文件夹es-01（名字不是必须的）,logging.yml是自带的，elasticsearch.yml是创建的文件，内如见下：
[[email protected] ~]# cd /etc/elasticsearch/ [[email protected] elasticsearch]# tree . ├── es-01│ ├── elasticsearch.yml │ └── logging.yml └── scripts
[[email protected] elasticsearch]# cat es-01/elasticsearch.yml ---- http: port: 9200network: host: elk.test.com node: name: elk.test.com path: data: /etc/elasticsearch/data/es-01
3.8 重启elasticsearch、logstash服务。
3.9 将 fiebeat安装包拷贝到 rsyslog、nginx 客户端上
[[email protected] elk]# scp filebeat-1.2.3-x86_64.rpm [email protected]:/root/elk [[email protected] elk]# scp filebeat-1.2.3-x86_64.rpm [email protected]:/root/elk [[email protected] elk]# scp /etc/pki/tls/certs/logstash-forwarder.crt rsyslog.test.com:/root/elk [[email protected] elk]# scp /etc/pki/tls/certs/logstash-forwarder.crt nginx.test.com:/root/elk
四、客户端部署filebeat（在rsyslog、nginx客户端上操作）
filebeat客户端是一个轻量级的，从服务器上的文件收集日志资源的工具，这些日志转发到处理到Logstash服务器上。该Filebeat客户端使用安全的Beats协议与Logstash实例通信。lumberjack协议被设计为可靠性和低延迟。Filebeat使用托管源数据的计算机的计算资源，并且Beats输入插件尽量减少对Logstash的资源需求。
4.1.（node1）安装filebeat，拷贝证书，创建收集日志配置文件
[[email protected] elk]# yum localinstall filebeat-1.2.3-x86_64.rpm -y #拷贝证书到本机指定目录中 [[email protected] elk]# cp logstash-forwarder.crt /etc/pki/tls/certs/. [[email protected] elk]# cd /etc/filebeat/ [[email protected] filebeat]# tree . ├── conf.d │ ├── authlogs.yml │ └── syslogs.yml ├── filebeat.template.json └── filebeat.yml1 directory, 4 files
修改的文件有3个，filebeat.yml，是定义连接logstash 服务器的配置。conf.d目录下的2个配置文件是自定义监控日志的，下面看下各自的内容：
filebeat.yml
View Code
authlogs.yml & syslogs.yml
View Code
修改完成后，启动filebeat服务
[[email protected] filebeat]# service filebeat start Starting filebeat: [ OK ] [[email protected] filebeat]# chkconfig filebeat on [[email protected] filebeat]# netstat -altp Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 localhost:25151 *:* LISTEN 6230/python2 tcp 0 0 *:ssh *:* LISTEN 5509/sshd tcp 0 0 localhost:ipp *:* LISTEN 1053/cupsd tcp 0 0 localhost:smtp *:* LISTEN 1188/master tcp 0 0 rsyslog.test.com:51155 elk.test.com:commplex-main ESTABLISHED 7443/filebeat tcp 0 52 rsyslog.test.com:ssh 192.168.30.65:10580 ESTABLISHED 7164/sshd tcp 0 0 *:ssh *:* LISTEN 5509/sshd tcp 0 0 localhost:ipp *:* LISTEN 1053/cupsd tcp 0 0 localhost:smtp *:* LISTEN 1188/master
如果连接不上，状态不正常的话，检查下客户端的防火墙。
4.2. （node2）安装filebeat，拷贝证书，创建收集日志配置文件
[[email protected] elk]# yum localinstall filebeat-1.2.3-x86_64.rpm -y [[email protected] elk]# cp logstash-forwarder.crt /etc/pki/tls/certs/. [[email protected] elk]# cd /etc/filebeat/ [[email protected] filebeat]# tree . ├── conf.d │ ├── nginx.yml │ └── syslogs.yml ├── filebeat.template.json └── filebeat.yml1 directory, 4 files
修改filebeat.yml 内容如下：
View Code
syslogs.yml & nginx.yml
View Code
修改完成后，启动filebeat服务，并检查filebeat进程
[[email protected] filebeat]# service filebeat start Starting filebeat: [ OK ] [[email protected] filebeat]# chkconfig filebeat on [[email protected] filebeat]# netstat -aulpt Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:ssh *:* LISTEN 1076/sshd tcp 0 0 localhost:smtp *:* LISTEN 1155/master tcp 0 0 *:http *:* LISTEN 1446/nginx tcp 0 52 nginx.test.com:ssh 192.168.30.65:11690 ESTABLISHED 1313/sshd tcp 0 0 nginx.test.com:49500 elk.test.com:commplex-main ESTABLISHED 1515/filebeat tcp 0 0 nginx.test.com:ssh 192.168.30.65:6215 ESTABLISHED 1196/sshd tcp 0 0 nginx.test.com:ssh 192.168.30.65:6216 ESTABLISHED 1200/sshd tcp 0 0 *:ssh *:* LISTEN 1076/sshd
通过上面可以看出，客户端filebeat进程已经和 elk 服务器连接了。下面去验证。
五、验证，访问kibana http://192.168.30.67
5.1 设置下
查看下两台机器的系统日志：node1的
node2的nginx 访问日志
六、体验
之前在学习rsyslog +LogAnalyzer，然后又学了这个之后，发现elk 不管从整体系统，还是体验都是不错的，而且更新快。后续会继续学习，更新相关的监控过滤日志方法，日志分析，以及使用kafka 来进行存储的架构。
以上是关于Centos7 之安装Logstash ELK stack 日志管理系统的主要内容，如果未能解决你的问题，请参考以下文章