tr069开源协议EasyCwmp移植

Posted 2020-09-12 Skyscraper

1.平台
MT7628

2.交叉编译器及版本信息
mipsel-linux + buildroot-gcc463_32bits.tar.bz2

3.创建工作目录
[email protected]:~$ mkdir -p tr069/usr

[email protected]:~/tr069/usr$ pwd
/home/lancer/tr069/usr

4.移植json-c -----------------------------------------------------------------------------------------------
[email protected]:/home/lancer/tr069# git clone git://github.com/json-c/json-c.git
cd json-c

Generate configuration files:
# sh autogen.sh

Configure:
# ./configure --prefix=/home/lancer/tr069/usr --host=mipsel-linux

# make
# make install
# ln -sf /home/lancer/tr069/usr/include/json-c /usr/include/json

5.移植libubox ----------------------------------------------------------------------------------------------
[email protected]:/home/lancer/tr069# git clone git://nbd.name/luci2/libubox.git
cd libubox

Configure:
vim CMakeLists.txt #在前边添加如下配置，注意是最前边
SET(CMAKE_SYSTEM_NAME Linux)
SET(CMAKE_C_COMPILER "mipsel-linux-gcc")
SET(CMAKE_CXX_COMPILER "mipsel-linux-g++")
INCLUDE_DIRECTORIES("/home/lancer/tr069/usr/include/")
INCLUDE_DIRECTORIES("/home/lancer/tr069/usr/include/json-c")
LINK_DIRECTORIES("/home/lancer/tr069/usr/lib")

(cmake如何清除编译缓存,[email protected]:/home/lancer/tr069/libubox# rm CMakeCache.txt)
[email protected]:/home/lancer/tr069/libubox# cmake CMakeLists.txt -DBUILD_LUA=OFF -DCMAKE_INSTALL_PREFIX=/home/lancer/tr069/usr
-- The C compiler identification is GNU
-- Check for working C compiler: /opt/buildroot-gcc463/usr/bin/mipsel-linux-cc
-- Check for working C compiler: /opt/buildroot-gcc463/usr/bin/mipsel-linux-cc -- works #说明添加OK

Build:
[email protected]:/home/lancer/tr069/libubox# make
Scanning dependencies of target ubox
[ 3%] Building C object CMakeFiles/ubox.dir/avl.c.o
[ 6%] Building C object CMakeFiles/ubox.dir/avl-cmp.c.o
[ 9%] Building C object CMakeFiles/ubox.dir/blob.c.o
[ 12%] Building C object CMakeFiles/ubox.dir/blobmsg.c.o
[ 16%] Building C object CMakeFiles/ubox.dir/uloop.c.o
[ 19%] Building C object CMakeFiles/ubox.dir/usock.c.o
[ 22%] Building C object CMakeFiles/ubox.dir/ustream.c.o
[ 25%] Building C object CMakeFiles/ubox.dir/ustream-fd.c.o
[ 29%] Building C object CMakeFiles/ubox.dir/vlist.c.o
[ 32%] Building C object CMakeFiles/ubox.dir/utils.c.o
[ 35%] Building C object CMakeFiles/ubox.dir/safe_list.c.o
[ 38%] Building C object CMakeFiles/ubox.dir/runqueue.c.o
[ 41%] Building C object CMakeFiles/ubox.dir/md5.c.o
[ 45%] Building C object CMakeFiles/ubox.dir/ulog.c.o
Linking C shared library libubox.so
[ 45%] Built target ubox
Scanning dependencies of target blobmsg_json
[ 48%] Building C object CMakeFiles/blobmsg_json.dir/blobmsg_json.c.o
In file included from /home/lancer/tr069/libubox/blobmsg_json.c:17:0:
/home/lancer/tr069/libubox/blobmsg_json.h:22:24: fatal error: json/json.h: No such file or directory
compilation terminated.
make[2]: *** [CMakeFiles/blobmsg_json.dir/blobmsg_json.c.o] Error 1
make[1]: *** [CMakeFiles/blobmsg_json.dir/all] Error 2
make: *** [all] Error 2
解决方案：
我们前边已经包含了头文件路径，"/home/lancer/tr069/usr/include/json-c"，把所有"json/json.h"，改为"json.h"再重新编译
/home/lancer/tr069/libubox/blobmsg_json.c: In function ‘__blobmsg_add_json‘:
/home/lancer/tr069/libubox/blobmsg_json.c:78:2: error: implicit declaration of function ‘is_error‘ [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors
make[2]: *** [CMakeFiles/blobmsg_json.dir/blobmsg_json.c.o] Error 1
make[1]: *** [CMakeFiles/blobmsg_json.dir/all] Error 2
make: *** [all] Error 2
解决方案：
vim blobmsg_json.c +78添加头文件
#include "bits.h"重新编译OK

Install:
sudo make install
sudo ln -sf /usr/local/lib/libubox.so /usr/lib/libubox.so
sudo mkdir -p /usr/share/libubox
sudo ln -sf /usr/local/share/libubox/jshn.sh /usr/share/libubox/jshn.sh

6.移植uci--------------------------------------------------------------------------------------------------
Get the sources:
[email protected]:~/tr069$ git clone git://nbd.name/uci.git
cd uci

Configure:
vim CMakeLists.txt #在前边添加如下配置，注意是最前边
SET(CMAKE_SYSTEM_NAME Linux)
SET(CMAKE_C_COMPILER "mipsel-linux-gcc")
SET(CMAKE_CXX_COMPILER "mipsel-linux-g++")
INCLUDE_DIRECTORIES("/home/lancer/tr069/usr/include/")
LINK_DIRECTORIES("/home/lancer/tr069/usr/lib")
[email protected]:/home/lancer/tr069/uci# cmake CMakeLists.txt -DBUILD_LUA=OFF -DCMAKE_INSTALL_PREFIX=/home/lancer/tr069/usr2

Build:
make

Install:
class="western"
sudo make install
sudo ln -sf /usr/local/bin/uci /sbin/uci
sudo ln -sf /usr/local/lib/libuci.so /usr/lib/libuci.so

7.移植ubus-------------------------------------------------------------------------------------------------
Get the sources:
[email protected]:/home/lancer/tr069# git clone git://nbd.name/luci2/ubus.git
cd ubus

Configure:
vim CMakeLists.txt #在前边添加如下配置，注意是最前边
SET(CMAKE_SYSTEM_NAME Linux)
SET(CMAKE_C_COMPILER "mipsel-linux-gcc")
SET(CMAKE_CXX_COMPILER "mipsel-linux-g++")
INCLUDE_DIRECTORIES("/home/lancer/tr069/usr/include/")
INCLUDE_DIRECTORIES("/home/lancer/tr069/usr/include/json-c")
LINK_DIRECTORIES("/home/lancer/tr069/usr/lib")
[email protected]:/home/lancer/tr069/ubus# cmake CMakeLists.txt -DBUILD_LUA=OFF -DCMAKE_INSTALL_PREFIX=/home/lancer/tr069/usr

Build:
make

Install:
sudo make install
sudo ln -sf /usr/local/sbin/ubusd /usr/sbin/ubusd
sudo ln -sf /usr/local/lib/libubus.so /usr/lib/libubus.so

8.移植microxml---------------------------------------------------------------------------------------------
Get the sources:
[email protected]:/home/lancer/tr069# git clone https://github.com/pivasoftware/microxml.git
cd microxml

Generate configuration files:
[email protected]:/home/lancer/tr069/microxml# autoconf -i

Configure:
[email protected]:/home/lancer/tr069/microxml# ./configure --prefix=/home/lancer/tr069/usr --host=mipsel-linux --enable-threads --enable-shared --enable-static

Build:
make

Install:
sudo make install
sudo ln -sf /usr/lib/libmicroxml.so.1.0 /lib/libmicroxml.so
sudo ln -sf /usr/lib/libmicroxml.so.1.0 /lib/libmicroxml.so.1

9.移植curl
下载：https://curl.haxx.se/download.html ：curl-7.53.1.tar.gz
cd curl-7.53.1

Configure:
[email protected]:/home/lancer/tr069/curl-7.53.1# ./configure --prefix=/home/lancer/tr069/usr --host=mipsel-linux

Build:
make

Install:
sudo make install

10.移植easycwmp-----------------------------------------------------------------------------------------------
官网下载：http://www.easycwmp.org/download.html : 我选择easycwmp-1.5.2.tar.gz
cd easycwmp-1.5.2

Generate configuration files:
[email protected]:/home/lancer/tr069/easycwmp-1.5.2# autoreconf -i

Configure:
./configure --prefix=/home/lancer/tr069/usr --host=mipsel-linux --enable-debug --enable-devel --enable-acs=multi --enable-jsonc=1 --x-includes=/home/lancer/tr069/usr/include/ --x-libraries=-L/home/lancer/tr069/usr/lib
......
checking for LIBCURL... no
configure: error: Package requirements (libcurl) were not met:

Package libcurl was not found in the pkg-config search path.
Perhaps you should add the directory containing `libcurl.pc‘
to the PKG_CONFIG_PATH environment variable
No package ‘libcurl‘ found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables LIBCURL_CFLAGS
and LIBCURL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
解决方案：
[email protected]:/home/lancer/tr069/easycwmp-1.5.2# PKG_CONFIG_PATH=/home/lancer/tr069/usr//lib/pkgconfig:$PKG_CONFIG_PATH
[email protected]:/home/lancer/tr069/easycwmp-1.5.2# export PKG_CONFIG_PATH
[email protected]:/home/lancer/tr069/easycwmp-1.5.2# echo $PKG_CONFIG_PATH
/home/lancer/tr069/usr//lib/pkgconfig:
[email protected]:/home/lancer/tr069/easycwmp-1.5.2# ./configure --prefix=/home/lancer/tr069/usr --host=mipsel-linux --enable-debug --enable-devel --enable-acs=multi --enable-jsonc=1
OK
或者vim /opt/buildroot-gcc463/usr/bin/pkg-config修改
#!/bin/sh
#PKG_CONFIG_LIBDIR=${PKG_CONFIG_LIBDIR:-/opt/buildroot-gcc463/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib/pkgconfig:/opt/buildroot-gcc463/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/share/pkgconfig} PKG_CONFIG_SYSROOT_DIR=${PKG_CONFIG_SYSROOT_DIR:-/opt/buildroot-gcc463/usr/mipsel-buildroot-linux-uclibc/sysroot} $(dirname $0)/pkgconf [email protected]
PKG_CONFIG_LIBDIR=${PKG_CONFIG_LIBDIR:-/home/lancer/tr069/usr/lib/pkgconfig:/home/lancer/tr069/usr/share/pkgconfig} PKG_CONFIG_SYSROOT_DIR=${PKG_CONFIG_SYSROOT_DIR:-} $(dirname $0)/pkgconf [email protected]
为PKG_CONFIG_LIBDIR=${PKG_CONFIG_LIBDIR:-/home/lancer/tr069/usr/lib/pkgconfig:/home/lancer/tr069/usr/share/pkgconfig} PKG_CONFIG_SYSROOT_DIR=${PKG_CONFIG_SYSROOT_DIR:-/opt/buildroot-gcc463/usr/mipsel-buildroot-linux-uclibc/sysroot} $(dirname $0)/pkgconf [email protected]
当然第二种更好，不然编译还会有如下问题。

Build:
make
[email protected]:/home/lancer/tr069/easycwmp-1.5.2# make
Making all in bin
make[1]: Entering directory `/home/lancer/tr069/easycwmp-1.5.2/bin‘
mipsel-linux-gcc -DPACKAGE_NAME=\"easycwmpd\" -DPACKAGE_TARNAME=\"easycwmpd\" -DPACKAGE_VERSION=\"1.5.2\" -DPACKAGE_STRING=\"easycwmpd\ 1.5.2\" -DPACKAGE_BUGREPORT=\"[email protected]\" -DPACKAGE_URL=\"\" -DPACKAGE=\"easycwmpd\" -DVERSION=\"1.5.2\" -DPACKAGE=\"easycwmpd\" -DVERSION=\"1.5.2\" -DJSONC=1 -DDEBUG=1 -DDEVEL=1 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -I. -I/opt/buildroot-gcc463/usr/mipsel-buildroot-linux-uclibc/sysroot/home/lancer/tr069/usr/include -D_THREAD_SAFE -D_REENTRANT -I/opt/buildroot-gcc463/usr/mipsel-buildroot-linux-uclibc/sysroot/home/lancer/tr069/usr/include -g -O2 -MT ../src/easycwmpd-backup.o -MD -MP -MF ../src/.deps/easycwmpd-backup.Tpo -c -o ../src/easycwmpd-backup.o `test -f ‘../src/backup.c‘ || echo ‘./‘`../src/backup.c
In file included from ../src/backup.c:13:0:
../src/backup.h:15:22: fatal error: microxml.h: No such file or directory
compilation terminated.
make[1]: *** [../src/easycwmpd-backup.o] Error 1
make[1]: Leaving directory `/home/lancer/tr069/easycwmp-1.5.2/bin‘
make: *** [all-recursive] Error 1
看前边。

自此，tr069相关库及程序都已交叉编译完毕。