MA5620与U1960链接配置
Posted
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了MA5620与U1960链接配置相关的知识，希望对你有一定的参考价值。
>>User name:root >>User password: Huawei Integrated Access Software (MA5620). Copyright(C) Huawei Technologies Co., Ltd. 2002-2013. All rights reserved. ----------------------------------------------------------------------------- User last login information: ----------------------------------------------------------------------------- Access Type : Telnet IP-Address : 192.168.xxx.xxx Login Time : 2017-03-20 13:48:01+08:00 Logout Time : 2017-03-20 13:54:42+08:00 ----------------------------------------------------------------------------- ----------------------------------------------------------------------------- All user fail login information: ----------------------------------------------------------------------------- Access Type IP-Address Time Login Times ----------------------------------------------------------------------------- Serial -- 2017-03-18 15:10:51+08:00 2 Telnet xx.x.xxx.xx 2017-03-18 14:41:58+08:00 1 ----------------------------------------------------------------------------- User root has used a default password. Change the password in time. MA5620>enable MA5620#display current-configuration { <cr>|port<K>|section<K>|service-port<K>|simple<K>||<K> }: Command: display current-configuration [MA5620V800R312: 2300] # [sysmode] <sysmode> protocol support sip #把默认协议改为sip,需要reboot后生效# [device-config] <device-config> port port-index 0/0/1 port-type GPON-PORT # [public-config] <public-config> snmp-agent local-engineid XXXXXXXXXXXXXXXXXXXX # [vlan-config] <vlan-config> vlan 100 to 104 smart protocol-8021p-pri 5 vlan 104 port vlan 100 to 104 0/0 1 # [gponnni] <gponnni-0/0/1> interface gponnni 0/0/1 password "%5L3_.^M^.9I\5<[email protected]#JI1!!B#A8&)VAB‘]]F;U$19‘2_1!!B#A8&)VAB‘]]F;U$19‘ 2_1!!%" loid "%VL*&O__.3U3;RaK‘0`"NPQ!!,DWUN(I=,‘UZ_`@1RI<=WQ!!%" checkcode "%L9;7+FT2-[LX3NU/[email protected]]Q!!%" # [bbs-config] <bbs-config>
命令格式
service-port
序号
vlan
301
0
框
/0
板
/1
端口
multi-service
user-vlan
untagged
rx-cttr
速率模板号
tx-cttr
速率模板号
模板号为
0-63,
其中
2
为
4M
命令格式
service-port
序号
vlan
301
0
框
/0
板
/1
端口
multi-service
user-vlan
untagged
rx-cttr
速率模板号
tx-cttr
速率模板号
模板号为
0-63,
其中
2
为
4M
#service-port 序号 vlan 101 0框/1版/1端口，multi-service user-vlan 速率模板号untagged inbound traffic-table index 6 outbound traffic-table index 6
service-port 0 vlan 101 eth 0/1/1 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 1 vlan 101 eth 0/1/2 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 2 vlan 101 eth 0/1/3 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 3 vlan 101 eth 0/1/4 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 4 vlan 101 eth 0/1/5 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 5 vlan 101 eth 0/1/6 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 6 vlan 101 eth 0/1/7 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 7 vlan 101 eth 0/1/8 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 8 vlan 102 eth 0/1/9 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 9 vlan 102 eth 0/1/10 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 10 vlan 102 eth 0/1/11 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 11 vlan 102 eth 0/1/12 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 12 vlan 102 eth 0/1/13 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 13 vlan 102 eth 0/1/14 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 14 vlan 102 eth 0/1/15 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
service-port 15 vlan 102 eth 0/1/16 multi-service user-vlan untagged inbound
traffic-table index 6 outbound traffic-table index 6
#
[voip]
<voip>
voip
ip address media 本机IP 上行MA5608t
ip address signaling 本机IP #因为5620下就直接连电话，所以填本机#
[sip]
<sip-0>
interface sip 0
if-sip attribute basic media-ip 本机IP signal-ip 本机IP signal-port 5060
if-sip attribute basic primary-proxy-ip1 U1960IP primary-proxy-port 5060
#
[esl-user]
<esl-user>
esl user
sippstnuser add 0/2/1 0 telno XXXX #为8位号码后四位
sippstnuser add 0/2/2 0 telno XXXX
sippstnuser add 0/2/3 0 telno XXXX
sippstnuser add 0/2/4 0 telno XXXX
sippstnuser add 0/2/5 0 telno XXXX
sippstnuser attribute set 0/2/1 dc-time 80
sippstnuser attribute set 0/2/2 dc-time 80
sippstnuser attribute set 0/2/3 dc-time 80
sippstnuser attribute set 0/2/4 dc-time 80
sippstnuser attribute set 0/2/5 dc-time 80
sippstnuser rightflag set 0/2/1 telno XXXX cw disable
sippstnuser rightflag set 0/2/2 telno XXXX cw disable
sippstnuser rightflag set 0/2/3 telno XXXX cw disable
sippstnuser rightflag set 0/2/4 telno XXXX cw disable
sippstnuser rightflag set 0/2/5 telno XXXX cw disable
#
[prevlanif]
<prevlanif>
interface vlanif103
interface vlanif104
#
[vlanif]
<vlanif103>
interface vlanif103
ip address 本机IP 255.255.255.0
#
<vlanif104>
interface vlanif104
ip address 管理地址IP 255.255.255.0
#
[meth]
<meth0>
interface meth0
ip address 10.11.104.2 255.255.255.0 默认管理地址#
[null]
<null0>
interface null0
#
[aaa]
<aaa>
aaa
authentication-scheme "default"
#
authorization-scheme "default"
#
accounting-scheme "default"
#
domain "default"
#
[post-system]
<post-system>
ip route-static 本地IP网段 255.255.255.0 MA5608IP#
return
以上是关于MA5620与U1960链接配置的主要内容，如果未能解决你的问题，请参考以下文章
华为ma5680t OLT 怎么配置华为5620-16 epon交换机 谢谢 高分送上
Tomcat/Hibernate 与 MySql 的连接失败，出现“通信链接失败”和“权限被拒绝”