洛谷P2903 [USACO08MAR]麻烦的干草打包机The Loathesome Hay Baler

Posted 2020-09-05 嘒彼小星

P2903 [USACO08MAR]麻烦的干草打包机The Loathesome Hay Baler

题目描述

Farmer John has purchased the world‘s most loathesome hay baler. Instead of having a drive-roller that drives maybe an idler roller that drives the power take-off for the baler, it has N rollers (2 <= N <= 1050) which drive and are driven by various rollers.

FJ has meticulously cataloged data for each roller i: X_i,Y_i are the center of the roller (-5000 <= X_i <= 5000; -5000 <= Y_i <= 5000); R_i is the roller‘s radius (3 <= R_i <= 800). The drive-roller is located at 0,0; the baler power take-off is located at X_t,Y_t (numbers supplied in the input).

The drive-roller turns clockwise at 10,000 revolutions per hour. Your job is to determine the speeds of all the rollers that are in the power-train: from the drive-roller through the power take-off roller. Rollers that do not transfer power to the take-off roller are to be ignored. A roller of radius Rd that is turning at S rph and driving another roller of radius Rx will cause the second roller to turn at the speed -S*Rd/Rx (where the sign denotes whether the roller is turning clockwise or counterclockwise (anticlockwise for our British friends)).

Determine the power-train path and report the sum of the absolute values of all those rollers‘ speeds. All the rollers in the input set except the driver-roller are driven by some other roller; power is never transferred to a roller from more than one other roller.

Report your answer as an integer that is the truncated value after summing all the speeds.

Farmer John新买的干草打包机的内部结构大概算世界上最混乱的了，它不象普通的机器一样有明确的内部传动装置，而是，N (2 <= N <= 1050)个齿轮互相作用，每个齿轮都可能驱动着多个齿轮。 FJ记录了对于每个齿轮i，记录了它的3个参数：X_i，Y_i表示齿轮中心的位置坐标(-5000 <= X_i <= 5000; -5000 <= Y_i <= 5000)；R_i表示该齿轮的半径(3 <= R_i <= 800)。

驱动齿轮的位置为0,0，并且FJ也知道最终的工作齿轮位于X_t,Y_t。 驱动齿轮顺时针转动，转速为10,000转/小时。你的任务是，确定传动序列中所有齿轮的转速。传动序列的定义为，能量由驱动齿轮传送到工作齿轮的过程中用到的所有齿轮的集合。对能量传送无意义的齿轮都应当被忽略。

在一个半径为Rd，转速为S转/每小时的齿轮的带动下，与它相接的半径为Rx的齿轮的转速将为-S*Rd/Rx转/小时。S前的负号的意思是，一个齿轮带动的另一个齿轮的转向会与它的转向相反。

FJ只对整个传动序列中所有齿轮速度的绝对值之和感兴趣，你的任务也就相应转化成求这个值。机器中除了驱动齿轮以外的所有齿轮都被另外某个齿轮带动，并且不会出现2个不同的齿轮带动同一个齿轮的情况。

输入输出格式

输入格式：

• Line 1: Three space-separated integers: N, X_t, and Y_t

• Lines 2..N+1: Line i+1 describes roller i‘s properties: X_i, Y_i, and R_i

输出格式：

• Line 1: A single integer that is the truncated version of the sum of the absolute value of the speeds of the rollers in the power-train including the drive-roller, all the driven rollers, and the power take-off roller.

输入输出样例

输入样例#1：

4 32 54 
0 0 10 
0 30 20 
32 54 20 
-40 30 20 

输出样例#1：

20000 

说明

Four rollers: the drive-roller at 0,0 with radius 10. It drives the roller above it at 0,30 with radius 20. That roller drives both the power take-off roller at 32,54 (r=20) and a random roller (not in the power train) at -40,30 (r=20).

Roller Radius Speed

1 (0,0) 10 10,000

2 (0,30) 20 -5,000

3 (32,54) 20 5,000

---

Sum of abs values: 20,000

 

bfs一下就可以了。

 

注意几个问题：

1、相切才能联动！

2、精度！用double！

 

#include <iostream>
#include <cstdio>
#include <cstring>
#include <cstdlib>
#include <algorithm>
#include <queue>
#include <cmath>

const int sx = 1;
const int sy = 1;
const int K = 0;
const int MAXN = 1050 + 10;

int n,ex,ey;
int pre[MAXN];  //pre[i]琛ㄧずI鐨勯┍鍔ㄩ娇杞墍鍦ㄧ殑涓嬫爣浣嶇疆
int start;
int b[MAXN];


struct T
{
	int x,y,r;
	double energy, s;
}circle[MAXN];

inline bool IsPre(T& a, T& b)
{
	int d = (a.x - b.x)*(a.x - b.x)+ (a.y - b.y)*(a.y - b.y);
	int sum = a.r + b.r;
	return d == sum*sum;
}

void bfs()
{
	std::queue<T> q;
	q.push(circle[start]);
	b[start] = true;
	while(!q.empty())
	{
		T temp = q.front();
		q.pop();
		for(int i = 1;i <= n;i ++)
		{
			if( !b[i] && IsPre(circle[i], temp))
			{
				b[i] = true;
				circle[i].s =  temp.s * temp.r / circle[i].r;
				circle[i].energy = circle[i].s + temp.energy;
				if(circle[i].x  == ex && circle[i].y == ey)
				{
					printf("%d", (int)circle[i].energy);
					return ;
				}
				q.push(circle[i]);
			}
		}
	}
}


int main()
{
	freopen("data.txt", "r", stdin);
	scanf("%d%d%d", &n ,&ex, &ey);
	ex += K;
	ey += K;
	for(int i = 1;i <= n;i ++)
	{
		scanf("%d%d%d", &circle[i].x, &circle[i].y, &circle[i].r);
		circle[i].x += K;
		circle[i].y += K;
		if(circle[i].x == K && circle[i].y == K)
		{
			start = i;
			circle[i].s = 10000;
			circle[i].energy = 10000;
		}
	}
	bfs();
	return 0;
}