stty--设置终端线

Posted yuxi_o

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了stty--设置终端线相关的知识,希望对你有一定的参考价值。

stty - chang and print terminal line settings

SYNOPSIS
stty [-F DEVICE | --file=DEVICE] [SETTING]...
stty [-F DEVICE | --file=DEVICE] [-a|--all]
stty [-F DEVICE | --file=DEVICE] [-g|--save]

DESCRIPTION
Print or change terminal characteristics.

-a, --all
print all current settings in human-readable form

-g, --save
print all current settings in a stty-readable form

-F, --file=DEVICE
open and use the specified DEVICE instead of stdin

--help display this help and exit

--version
output version information and exit

Optional - before SETTING indicates negation. An * marks non-POS
IX settings. The underlying system defines which settings are available.

可用stty设置波特率,设置串口回现等。

~$sudo stty -F /dev/tty0 -a
speed 38400 baud; rows 37; columns 100; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z;
rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon
-ixoff -iuclc -ixany -imaxbel -iutf8
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0
vt0 ff0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop
-echoprt -echoctl -echoke

~$sudo stty -F /dev/tty0 echo

以上是关于stty--设置终端线的主要内容,如果未能解决你的问题,请参考以下文章

linux的stty命令详解

Linux命令之stty

一个很好玩的命令:stty

Linux stty命令

stty(set tty)

终端操作