How to solve Nissan Consult 3 plus can't see no vehicle in list

Posted 2020-08-19

My Nissan Consult 3 plus can‘t see no vehicle in list. And the same situation when selecting "diagnosis(One system)", there is only Renault!
In "SuB", can not view all brands, only button "unit setting"/"country selection" and "vi/mi registration".
++

Problem solved! Consult 3 + won‘t install with Nissan channel if Renault Clip installation is detected! It‘s the reason why i can not choose brand installation (Nissan/Datsun... If clip is present, channel Renault is choosing by default without choice). I will try later installing CP+ before clip abd will see if both application can be run in the same pc.

 

 

Then i was suggested to

“go back and check diagnostic tool.ini

in the first line is channel, you can change it there to select Nissan , Datsun , and the other one With 0,1,2 or is it 1,2,3 cant quite remember ,anyway , it has nothing to do with CLIP .

It will be the same without it .

another thing is , when you couldn‘t select these buttons , you could detect automatic vin

where you cannot select buttons, click each vehicle and wait two seconds, on one it will come alive and then for all of them.

another way is to remove quickly usb and put it back very fact , then will be alive , it is because of a block in the software .

really all the J2534 have access for ECU Programming , just like NERS.”

 

This article is from :http://blog.obd2express.co.uk/2016/11/10/consult-3-plus-can-see-no-vehicle/