内网无路由跨网络服务——单网卡双IP配置
Posted
tags:
篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了内网无路由跨网络服务——单网卡双IP配置相关的知识，希望对你有一定的参考价值。
有些时候，在我们内网服务中，如果不想使用路由功能，又想让某些服务器能够跨网络服务，那么此时，就需要在服务器网卡上配置多个IP地址，让它能够提供多个网络的访问，那么在linux下该如何实现了，今天就给大家分享一下。
操作步骤
1、cp eth0 eth0:1将网卡接口配置文件复制一份命名为eth0:1
2、修改网卡的具体配置信息
注意：eth0可以用DHCP，可以静态配置
eth0:1只能用静态配置
既然我们是服务器，当然两个配置都使用静态IP最好了
3、重启网络服务（确保NetworkManager服务处于停止状态）
4、验证最终效果
第一步：cp eth0 eth0:1将网卡接口配置文件复制一份命名为eth0:1
[[email protected] network-scripts]# cp ifcfg-eth0 ifcfg-eth0:1
第二步：修改网卡的具体配置信息
[[email protected] network-scripts]# vim ifcfg-eth0
[[email protected] network-scripts]# cat ifcfg-eth0
DEVICE=eth0
BOOTPROTO=none
IPADDR=10.1.253.253
PREFIX=16
[[email protected] network-scripts]# cat ifcfg-eth0:1
DEVICE=eth0：1
BOOTPROTO=none
IPADDR=192.168.253.253
PREFIX=24
[[email protected] network-scripts]#
第三步：重启网络服务（确保NetworkManager服务处于停止状态）
注意系统默认会开启NetworkManager服务，要想启用单网卡双IP，最好先关闭，否则会不生效
[[email protected] network-scripts]# service NetworkManager status
NetworkManager is stopped
[[email protected] network-scripts]# service network restart
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: Determining if ip address 10.1.253.253 is already in use for device eth0...
Determining if ip address 192.168.253.253 is already in use for device eth0...
[ OK ]
[[email protected] network-scripts]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:C8:72:26
inet addr:10.1.253.253 Bcast:10.1.255.255 Mask:255.255.0.0
inet6 addr: fe80::20c:29ff:fec8:7226/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1185 errors:0 dropped:0 overruns:0 frame:0
TX packets:366 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:107195 (104.6 KiB) TX bytes:38655 (37.7 KiB)
eth0:1 Link encap:Ethernet HWaddr 00:0C:29:C8:72:26
inet addr:192.168.253.253 Bcast:192.168.253.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:260 errors:0 dropped:0 overruns:0 frame:0
TX packets:260 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:18160 (17.7 KiB) TX bytes:18160 (17.7 KiB)
[[email protected] network-scripts]#
第四步：验证最终效果，从Centos7去pingCentos6上配置的双IP
[[email protected] network-scripts]# ifconfig
eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.1.254.254 netmask 255.255.0.0 broadcast 10.1.255.255
inet6 fe80::20c:29ff:fe06:f987 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:06:f9:87 txqueuelen 1000 (Ethernet)
RX packets 133425 bytes 10462696 (9.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 61400 bytes 6585145 (6.2 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eno16777728:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.253.254 netmask 255.255.255.0 broadcast 192.168.253.255
ether 00:0c:29:06:f9:87 txqueuelen 1000 (Ethernet)
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 2496 bytes 234576 (229.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2496 bytes 234576 (229.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[[email protected] network-scripts]# ping -c 4 10.1.253.253
PING 10.1.253.253 (10.1.253.253) 56(84) bytes of data.
64 bytes from 10.1.253.253: icmp_seq=1 ttl=64 time=3.41 ms
64 bytes from 10.1.253.253: icmp_seq=2 ttl=64 time=0.536 ms
64 bytes from 10.1.253.253: icmp_seq=3 ttl=64 time=0.539 ms
64 bytes from 10.1.253.253: icmp_seq=4 ttl=64 time=0.738 ms
--- 10.1.253.253 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3029ms
rtt min/avg/max/mdev = 0.536/1.306/3.413/1.219 ms
[[email protected] network-scripts]# ping -c 4 192.168.253.254
PING 192.168.253.254 (192.168.253.254) 56(84) bytes of data.
64 bytes from 192.168.253.254: icmp_seq=1 ttl=64 time=0.135 ms
64 bytes from 192.168.253.254: icmp_seq=2 ttl=64 time=0.126 ms
64 bytes from 192.168.253.254: icmp_seq=3 ttl=64 time=0.126 ms
64 bytes from 192.168.253.254: icmp_seq=4 ttl=64 time=0.128 ms
--- 192.168.253.254 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3017ms
rtt min/avg/max/mdev = 0.126/0.128/0.135/0.014 ms
[[email protected] network-scripts]#
可以看出，两个IP地址都可以ping通，所以如果是跨网络服务时，单网卡双IP的功效就体现出来了。
本文出自 “爱情防火墙” 博客，请务必保留此出处http://183530300.blog.51cto.com/894387/1846131
以上是关于内网无路由跨网络服务——单网卡双IP配置的主要内容，如果未能解决你的问题，请参考以下文章