After build the yocto raspberrypi image, sth goes wrong!

Posted

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了After build the yocto raspberrypi image, sth goes wrong!相关的知识,希望对你有一定的参考价值。

The yocto project testing:

"bitbake" the poky distribution with meta-raspberrypi layer for raspberrypi2 B+ board.

After I finished the build process successfully,

I use the following command to write the sd card

    "sudo dd if=tmp/deploy/images/raspberrypi2/rpi-hwup-image-raspberrypi2.rpi-sdimg of=/dev/sdb bs=1M"

Then  insert the sd card, something goes wrong with the boot process, it cannot boot with normal stuff.

Picture of the problems are as follows:

技术分享

以上是关于After build the yocto raspberrypi image, sth goes wrong!的主要内容,如果未能解决你的问题,请参考以下文章

Freescale L3.14.52_1.1.0 yocto build

Yocto Project Quick Build 翻译

从 Yocto SDK Build 安装时,QtCreator 认为 Qt5 QMake 安装无效

Yocto使用小技巧

yocto编译时报错"fatal: the '--set-upstream' option is no longer supported. Please use '-

yocto编译时报错"fatal: the '--set-upstream' option is no longer supported. Please use '-