Debussy与modelsim联仿时 do 文件脚本

Posted 2020-08-03 QQ29850706

 

quit -sim  
 
set PATH1 D:/Program/modelsim/vivado_lib
set PATH2 D:/Program/Vivado/Vivado/2014.4/data/verilog/src

set PATH3 D:/Program/Vivado/Vivado/2014.4/data/verilog/src/xeclib

vlib novas   
vmap novas novas    
vcom +acc -work novas novas.vhd

vlib work
 
 vmap work $PATH1/secureip              
 vmap work $PATH1/unisim                  
 vmap work $PATH1/unimacro              
 vmap work $PATH1/unifast              
 vmap work $PATH1/unisims_ver      
 vmap work $PATH1/unimacro_ver      
 vmap work $PATH1/unifast_ver      
 vmap work $PATH1/simprims_ver     

#vlog $PATH2/glbl.v
 
vlog  glbl.v
 
vlog -work work -f ../verilog.f 
vcom -work work -f ../vhdl.f
  
vlog -work work $PATH3/*.v 
 
#vsim -novopt work.tb_sensor_rxdata
vsim work.tb_sensor_rxdata

run 100ns

q 
 
## initial begin
##        $fsdbDumpfile("wave.fsdb");
##    //$fsdbDumpvars(1 , tb_binning_top);
##        $fsdbDumpvars;
##      forever #1 $display("Simulation Time now is : %t",$time);
## end

 

::关闭回显
@ECHO OFF
::设置软件路径
SET vsim=D:\Program\modelsim\win32\vsim.exe
SET debussy=D:\Program\Debussy\bin\Debussy.exe
::ModelSim Command
%vsim% -c -do sim.do
::删除ModelSim生成的相关文件
RD work /s /q
DEL transcript vsim.wlf /q
::Debussy Command
%debussy% -f ../verilog.f -f ../vhdl.f -ssf wave.fsdb -2001
::删除波形文件
DEL wave.fsdb /q
::删除Debussy生成的相关文件
RD  Debussy.exeLog  /s /q
DEL debussy.rc /q
::退出命令行
EXIT