WITH RECURSIVE and MySQL

Posted 功夫 熊猫

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了WITH RECURSIVE and MySQL相关的知识,希望对你有一定的参考价值。

WITH RECURSIVE and mysql

If you have been using certain DBMSs, or reading recent versions of the SQL standard, you are probably aware of the so-called “WITH clause” of SQL. Some call it Subquery Factoring. Others call it Common Table Expression. A form of the WITH CLAUSE, WITH RECURSIVE”, allows to design a recursive query: a query which repeats itself again and again, each time using the results of the previous iteration. This can be quite useful to produce reports based on hierarchical data. And thus is an alternative to Oracle’s CONNECT BY. MySQL does not natively support WITH RECURSIVE, but it is easy to emulate it with a generic, reusable stored procedure. Read the full article here

http://guilhembichot.blogspot.co.uk/2013/11/with-recursive-and-mysql.html

 

If you have been using certain DBMSs, or reading recent versions of the SQL standard, you are probably aware of the so-called "WITH clause" of SQL. Some call it Subquery Factoring. Others call it Common Table Expression. In its simplest form, this feature is a kind of "boosted derived table".
Assume that a table T1 has three columns:


CREATE TABLE T1(
YEAR INT, # 2000, 2001, 2002 ...
MONTH INT, # January, February, ...
SALES INT # how much we sold on that month of that year
);

Now I want to know the sales trend (increase/decrease), year after year:


SELECT D1.YEAR, (CASE WHEN D1.S>D2.S THEN ‘INCREASE‘ ELSE ‘DECREASE‘ END) AS TREND
FROM
  (SELECT YEAR, SUM(SALES) AS S FROM T1 GROUP BY YEAR) AS D1,
  (SELECT YEAR, SUM(SALES) AS S FROM T1 GROUP BY YEAR) AS D2
WHERE D1.YEAR = D2.YEAR-1;

Both derived tables are based on the same subquery text, but usually a DBMS is not smart enough to recognize it. Thus, it will evaluate "SELECT YEAR, SUM(SALES)... GROUP BY YEAR" twice! A first time to fill D1, a second time to fill D2. This limitation is sometimes stated as "it‘s not possible to refer to a derived table twice in the same query". Such double evaluation can lead to a serious performance problem. Using WITH, this limitation does not exist, and the following statement evaluates the subquery only once:


WITH D AS (SELECT YEAR, SUM(SALES) AS S FROM T1 GROUP BY YEAR)
SELECT D1.YEAR, (CASE WHEN D1.S>D2.S THEN ‘INCREASE‘ ELSE ‘DECREASE‘ END) AS TREND
FROM
 D AS D1,
 D AS D2
WHERE D1.YEAR = D2.YEAR-1;

This already demonstrates one benefit of WITH. In MySQL, WITH is not yet supported. But it can be emulated with a view:


CREATE VIEW D AS (SELECT YEAR, SUM(SALES) AS S FROM T1 GROUP BY YEAR);
SELECT D1.YEAR, (CASE WHEN D1.S>D2.S THEN ‘INCREASE‘ ELSE ‘DECREASE‘ END) AS TREND
FROM
 D AS D1,
 D AS D2
WHERE D1.YEAR = D2.YEAR-1;
DROP VIEW D;

Instead of a view, I could as well create D as a normal table. But not as a temporary table, because in MySQL a temporary table cannot be referred twice in the same query, as mentioned in the manual.
After this short introduction, showing the simplest form of WITH, I would like to turn to the more complex form of WITH: the RECURSIVE form. According to the SQL standard, to use the recursive form, you should write WITH RECURSIVE. However, looking at some other DBMSs, they seem to not require the RECURSIVE word. WITH RECURSIVE is a powerful construct. For example, it can do the same job as Oracle‘s CONNECT BY clause (you can check out some example conversions between both constructs). Let‘s walk through an example, to understand what WITH RECURSIVE does.
Assume you have a table of employees (this is a very classical example of WITH RECURSIVE):


CREATE TABLE EMPLOYEES (
ID INT PRIMARY KEY,
NAME VARCHAR(100),
MANAGER_ID INT,
INDEX (MANAGER_ID),
FOREIGN KEY (MANAGER_ID) REFERENCES EMPLOYEES(ID)
);
INSERT INTO EMPLOYEES VALUES
(333, "Yasmina", NULL),
(198, "John", 333),
(29, "Pedro", 198),
(4610, "Sarah", 29),
(72, "Pierre", 29),
(692, "Tarek", 333);

In other words, Yasmina is CEO, John and Tarek report to her. Pedro reports to John, Sarah and Pierre report to Pedro. In a big company, they would be thousands of rows in this table.
Now, let‘s say that you would like to know, for each employee: "how many people are, directly and indirectly, reporting to him/her"? Here is how I would do it. First, I would make a list of people who are not managers: with a subquery I get the list of all managers, and using NOT IN (subquery) I get the list of all non-managers:


SELECT ID, NAME, MANAGER_ID, 0 AS REPORTS
FROM EMPLOYEES
WHERE ID NOT IN (SELECT MANAGER_ID FROM EMPLOYEES WHERE MANAGER_ID IS NOT NULL);

Then I would insert the results into a new table named EMPLOYEES_EXTENDED; EXTENDED stands for "extended with more information", the new information being the fourth column named REPORTS: it is a count of people who are reporting directly or indirectly to the employee. Because  we have listed people who are not managers, they have a value of 0 in the REPORTS column. Then, we can produce the rows for "first level" managers (the direct managers of non-managers):


SELECT M.ID, M.NAME, M.MANAGER_ID, SUM(1+E.REPORTS) AS REPORTS
FROM EMPLOYEES M JOIN EMPLOYEES_EXTENDED E ON M.ID=E.MANAGER_ID
GROUP BY M.ID, M.NAME, M.MANAGER_ID;

Explanation: for a row of M (that is, for an employee), the JOIN will produce zero or more rows, one per non-manager directly reporting to the employee. Each such non-manager contributes to the value of REPORTS for his manager, through two numbers: 1 (the non-manager himself), and the number of direct/indirect reports of the non-manager (i.e. the value of REPORTS for the non-manager). Then I would empty EMPLOYEES_EXTENDED, and fill it with the rows produced just above, which describe the first level managers. Then the same query should be run again, and it would produce information about the "second level" managers. And so on. Finally, at one point Yasmina will be the only row of EMPLOYEES_EXTENDED, and when we run the above SELECT again, the JOIN will produce no rows, because E.MANAGER_ID will be NULL (she‘s the CEO). We are done.
It‘s time for a recap: EMPLOYEES_EXTENDED has been a kind of "temporary buffer", which has successively held non-managers, first level managers, second level managers, etc. We have used recursion. The answer to the original problem is: the union of all the successive content of EMPLOYEES_EXTENDED. Non-managers have been the start of the recursion, which is usually called "the anchor member" or "the seed". The SELECT query which moves from one step of  recursion to the next one, is the "recursive member". The complete statement looks like this:


WITH RECURSIVE
# The temporary buffer, also used as UNION result:
EMPLOYEES_EXTENDED
AS
(
  # The seed:
  SELECT ID, NAME, MANAGER_ID, 0 AS REPORTS
  FROM EMPLOYEES
  WHERE ID NOT IN (SELECT MANAGER_ID FROM EMPLOYEES WHERE MANAGER_ID IS NOT NULL)
UNION ALL
  # The recursive member:
  SELECT M.ID, M.NAME, M.MANAGER_ID, SUM(1+E.REPORTS) AS REPORTS
  FROM EMPLOYEES M JOIN EMPLOYEES_EXTENDED E ON M.ID=E.MANAGER_ID
  GROUP BY M.ID, M.NAME, M.MANAGER_ID
)
# what we want to do with the complete result (the UNION):
SELECT * FROM EMPLOYEES_EXTENDED;

MySQL does not yet support WITH RECURSIVE, but it is possible to code a generic stored procedure which can easily emulate it. Here is how you would call it:


CALL WITH_EMULATOR(
"EMPLOYEES_EXTENDED",
"
  SELECT ID, NAME, MANAGER_ID, 0 AS REPORTS
  FROM EMPLOYEES
  WHERE ID NOT IN (SELECT MANAGER_ID FROM EMPLOYEES WHERE MANAGER_ID IS NOT NULL)
",
"
  SELECT M.ID, M.NAME, M.MANAGER_ID, SUM(1+E.REPORTS) AS REPORTS
  FROM EMPLOYEES M JOIN EMPLOYEES_EXTENDED E ON M.ID=E.MANAGER_ID
  GROUP BY M.ID, M.NAME, M.MANAGER_ID
",
"SELECT * FROM EMPLOYEES_EXTENDED",
0,
""
);

You can recognize, as arguments of the stored procedure, every member of the WITH standard syntax: name of the temporary buffer, query for the seed, query for the recursive member, and what to do with the complete result. The last two arguments - 0 and the empty string - are details which you can ignore for now.
Here is the result returned by this stored procedure:


+------+---------+------------+---------+
| ID   | NAME    | MANAGER_ID | REPORTS |
+------+---------+------------+---------+
|   72 | Pierre  |         29 |       0 |
|  692 | Tarek   |        333 |       0 |
| 4610 | Sarah   |         29 |       0 |
|   29 | Pedro   |        198 |       2 |
|  333 | Yasmina |       NULL |       1 |
|  198 | John    |        333 |       3 |
|  333 | Yasmina |       NULL |       4 |
+------+---------+------------+---------+
7 rows in set

Notice how Pierre, Tarek and Sarah have zero reports, Pedro has two, which looks correct... However, Yasmina appears in two rows! Odd? Yes and no. Our algorithm starts from non-managers, the "leaves" of the tree (Yasmina being the root of the tree). Then our algorithm looks at first level managers, the direct parents of leaves. Then at second level managers. But Yasmina is both a first level manager (of the nonmanager Tarek) and a third level manager (of the nonmanagers Pierre, Tarek and Sarah). That‘s why she appears twice in the final result: once for the "tree branch" which ends at leaf Tarek, once for the tree branch which ends at leaves Pierre, Tarek and Sarah. The first tree branch contributes 1 direct/indirect report. The second tree branch contributes 4. The right number, which we want, is the sum of the two: 5. Thus we just need to change the final query, in the CALL:


CALL WITH_EMULATOR(
"EMPLOYEES_EXTENDED",
"
  SELECT ID, NAME, MANAGER_ID, 0 AS REPORTS
  FROM EMPLOYEES
  WHERE ID NOT IN (SELECT MANAGER_ID FROM EMPLOYEES WHERE MANAGER_ID IS NOT NULL)
",
"
  SELECT M.ID, M.NAME, M.MANAGER_ID, SUM(1+E.REPORTS) AS REPORTS
  FROM EMPLOYEES M JOIN EMPLOYEES_EXTENDED E ON M.ID=E.MANAGER_ID
  GROUP BY M.ID, M.NAME, M.MANAGER_ID
",
"
  SELECT ID, NAME, MANAGER_ID, SUM(REPORTS)
  FROM EMPLOYEES_EXTENDED
  GROUP BY ID, NAME, MANAGER_ID
",
0,
""
);

And here is finally the proper result:


+------+---------+------------+--------------+
| ID   | NAME    | MANAGER_ID | SUM(REPORTS) |
+------+---------+------------+--------------+
|   29 | Pedro   |        198 |            2 |
|   72 | Pierre  |         29 |            0 |
|  198 | John    |        333 |            3 |
|  333 | Yasmina |       NULL |            5 |
|  692 | Tarek   |        333 |            0 |
| 4610 | Sarah   |         29 |            0 |
+------+---------+------------+--------------+
6 rows in set

Let‘s finish by showing the body of the stored procedure. You will notice that it does heavy use of dynamic SQL, thanks to prepared statements. Its body does not depend on the particular problem to solve, it‘s reusable as-is for other WITH RECURSIVE use cases. I have added comments inside the body, so it should be self-explanatory. If it‘s not, feel free to drop a comment on this post, and I will explain further. Note that it uses temporary tables internally, and the first thing it does is dropping any temporary tables with the same names.


# Usage: the standard syntax:
#   WITH RECURSIVE recursive_table AS
#    (initial_SELECT
#     UNION ALL
#     recursive_SELECT)
#   final_SELECT;
# should be translated by you to 
# CALL WITH_EMULATOR(recursive_table, initial_SELECT, recursive_SELECT,
#                    final_SELECT, 0, "").

# ALGORITHM:
# 1) we have an initial table T0 (actual name is an argument
# "recursive_table"), we fill it with result of initial_SELECT.
# 2) We have a union table U, initially empty.
# 3) Loop:
#   add rows of T0 to U,
#   run recursive_SELECT based on T0 and put result into table T1,
#   if T1 is empty
#      then leave loop,
#      else swap T0 and T1 (renaming) and empty T1
# 4) Drop T0, T1
# 5) Rename U to T0
# 6) run final select, send relult to client

# This is for *one* recursive table.
# It would be possible to write a SP creating multiple recursive tables.

delimiter |

CREATE PROCEDURE WITH_EMULATOR(
recursive_table varchar(100), # name of recursive table
initial_SELECT varchar(65530), # seed a.k.a. anchor
recursive_SELECT varchar(65530), # recursive member
final_SELECT varchar(65530), # final SELECT on UNION result
max_recursion int unsigned, # safety against infinite loop, use 0 for default
create_table_options varchar(65530) # you can add CREATE-TABLE-time options
# to your recursive_table, to speed up initial/recursive/final SELECTs; example:
# "(KEY(some_column)) ENGINE=MEMORY"
)

BEGIN
  declare new_rows int unsigned;
  declare show_progress int default 0; # set to 1 to trace/debug execution
  declare recursive_table_next varchar(120);
  declare recursive_table_union varchar(120);
  declare recursive_table_tmp varchar(120);
  set recursive_table_next  = concat(recursive_table, "_next");
  set recursive_table_union = concat(recursive_table, "_union");
  set recursive_table_tmp   = concat(recursive_table, "_tmp"); 
  # Cleanup any previous failed runs
  SET @str =
    CONCAT("DROP TEMPORARY TABLE IF EXISTS ", recursive_table, ",",
    recursive_table_next, ",", recursive_table_union,
    ",", recursive_table_tmp);
  PREPARE stmt FROM @str;
  EXECUTE stmt; 
 # If you need to reference recursive_table more than
  # once in recursive_SELECT, remove the TEMPORARY word.
  SET @str = # create and fill T0
    CONCAT("CREATE TEMPORARY TABLE ", recursive_table, " ",
    create_table_options, " AS ", initial_SELECT);
  PREPARE stmt FROM @str;
  EXECUTE stmt;
  SET @str = # create U
    CONCAT("CREATE TEMPORARY TABLE ", recursive_table_union, " LIKE ", recursive_table);
  PREPARE stmt FROM @str;
  EXECUTE stmt;
  SET @str = # create T1
    CONCAT("CREATE TEMPORARY TABLE ", recursive_table_next, " LIKE ", recursive_table);
  PREPARE stmt FROM @str;
  EXECUTE stmt;
  if max_recursion = 0 then
    set max_recursion = 100; # a default to protect the innocent
  end if;
  recursion: repeat
    # add T0 to U (this is always UNION ALL)
    SET @str =
      CONCAT("INSERT INTO ", recursive_table_union, " SELECT * FROM ", recursive_table);
    PREPARE stmt FROM @str;
    EXECUTE stmt;
    # we are done if max depth reached
    set max_recursion = max_recursion - 1;
    if not max_recursion then
      if show_progress then
        select concat("max recursion exceeded");
      end if;
      leave recursion;
    end if;
    # fill T1 by applying the recursive SELECT on T0
    SET @str =
      CONCAT("INSERT INTO ", recursive_table_next, " ", recursive_SELECT);
    PREPARE stmt FROM @str;
    EXECUTE stmt;
    # we are done if no rows in T1
    select row_count() into new_rows;
    if show_progress then
      select concat(new_rows, " new rows found");
    end if;
    if not new_rows then
      leave recursion;
    end if;
    # Prepare next iteration:
    # T1 becomes T0, to be the source of next run of recursive_SELECT,
    # T0 is recycled to be T1.
    SET @str =
      CONCAT("ALTER TABLE ", recursive_table, " RENAME ", recursive_table_tmp);
    PREPARE stmt FROM @str;
    EXECUTE stmt;
    # we use ALTER TABLE RENAME because RENAME TABLE does not support temp tables
    SET @str =
      CONCAT("ALTER TABLE ", recursive_table_next, " RENAME ", recursive_table);
    PREPARE stmt FROM @str;
    EXECUTE stmt;
    SET @str =
      CONCAT("ALTER TABLE ", recursive_table_tmp, " RENAME ", recursive_table_next);
    PREPARE stmt FROM @str;
    EXECUTE stmt;
    # empty T1
    SET @str =
      CONCAT("TRUNCATE TABLE ", recursive_table_next);
    PREPARE stmt FROM @str;
    EXECUTE stmt;
  until 0 end repeat;
  # eliminate T0 and T1
  SET @str =
    CONCAT("DROP TEMPORARY TABLE ", recursive_table_next, ", ", recursive_table);
  PREPARE stmt FROM @str;
  EXECUTE stmt;
  # Final (output) SELECT uses recursive_table name
  SET @str =
    CONCAT("ALTER TABLE ", recursive_table_union, " RENAME ", recursive_table);
  PREPARE stmt FROM @str;
  EXECUTE stmt;
  # Run final SELECT on UNION
  SET @str = final_SELECT;
  PREPARE stmt FROM @str;
  EXECUTE stmt;
  # No temporary tables may survive:
  SET @str =
    CONCAT("DROP TEMPORARY TABLE ", recursive_table);
  PREPARE stmt FROM @str;
  EXECUTE stmt;
  # We are done :-)
END|

delimiter ;

In the SQL Standard, WITH RECURSIVE allows some nice additional tweaks (depth-first or breadth-first ordering, cycle detection). In future posts I will show how to emulate them too.

以上是关于WITH RECURSIVE and MySQL的主要内容,如果未能解决你的问题,请参考以下文章

mysql with recursive 递归用法

mysql with recursive 递归用法

with recursive用法

MYSQL8.0 WITH RECURSIVE递归查询

MySQL - WITH RECURSIVE AS 递归查询

MySQL - WITH RECURSIVE AS 递归查询