ansible-playbook -1 参数说明

Posted zxw-xxcsl

tags:

篇首语:本文由小常识网(cha138.com)小编为大家整理,主要介绍了ansible-playbook -1 参数说明相关的知识,希望对你有一定的参考价值。

ansible-playbook -help

获取参数说明:

Usage: ansible-playbook [options] playbook.yml [playbook2 ...]

Runs Ansible playbooks, executing the defined tasks on the targeted hosts.

Options:
  --ask-vault-pass      ask for vault password
  -C, --check           don‘t make any changes; instead, try to predict some
                        of the changes that may occur

      不作任何操作,测试可能发生的结果
  -D, --diff            when changing (small) files and templates, show the
                        differences in those files; works great with --check
  -e EXTRA_VARS, --extra-vars=EXTRA_VARS
                        set additional variables as key=value or YAML/JSON, if
                        filename prepend with @
  --flush-cache         clear the fact cache
  --force-handlers      run handlers even if a task fails
  -f FORKS, --forks=FORKS
                        specify number of parallel processes to use
                        (default=5)

        并行执行数量,默认为5
  -h, --help            show this help message and exit
  -i INVENTORY, --inventory=INVENTORY, --inventory-file=INVENTORY
                        specify inventory host path or comma separated host
                        list. --inventory-file is deprecated
  -l SUBSET, --limit=SUBSET
                        further limit selected hosts to an additional pattern
  --list-hosts          outputs a list of matching hosts; does not execute
                        anything else
  --list-tags           list all available tags
  --list-tasks          list all tasks that would be executed
  -M MODULE_PATH, --module-path=MODULE_PATH
                        prepend colon-separated path(s) to module library
                        (default=[u‘/root/.ansible/plugins/modules‘,
                        u‘/usr/share/ansible/plugins/modules‘])
  --new-vault-id=NEW_VAULT_ID
                        the new vault identity to use for rekey
  --new-vault-password-file=NEW_VAULT_PASSWORD_FILES
                        new vault password file for rekey
  --skip-tags=SKIP_TAGS
                        only run plays and tasks whose tags do not match these
                        values
  --start-at-task=START_AT_TASK
                        start the playbook at the task matching this name
  --step                one-step-at-a-time: confirm each task before running
  --syntax-check        perform a syntax check on the playbook, but do not
                        execute it
  -t TAGS, --tags=TAGS  only run plays and tasks tagged with these values
  --vault-id=VAULT_IDS  the vault identity to use
  --vault-password-file=VAULT_PASSWORD_FILES
                        vault password file
  -v, --verbose         verbose mode (-vvv for more, -vvvv to enable
                        connection debugging)
  --version             show program‘s version number and exit

  Connection Options:
    control as whom and how to connect to hosts

    -k, --ask-pass      ask for connection password
    --private-key=PRIVATE_KEY_FILE, --key-file=PRIVATE_KEY_FILE
                        use this file to authenticate the connection
    -u REMOTE_USER, --user=REMOTE_USER
                        connect as this user (default=None)
    -c CONNECTION, --connection=CONNECTION
                        connection type to use (default=smart)
    -T TIMEOUT, --timeout=TIMEOUT
                        override the connection timeout in seconds
                        (default=10)
    --ssh-common-args=SSH_COMMON_ARGS
                        specify common arguments to pass to sftp/scp/ssh (e.g.
                        ProxyCommand)
    --sftp-extra-args=SFTP_EXTRA_ARGS
                        specify extra arguments to pass to sftp only (e.g. -f,
                        -l)
    --scp-extra-args=SCP_EXTRA_ARGS
                        specify extra arguments to pass to scp only (e.g. -l)
    --ssh-extra-args=SSH_EXTRA_ARGS
                        specify extra arguments to pass to ssh only (e.g. -R)

  Privilege Escalation Options:
    control how and which user you become as on target hosts

    -s, --sudo          run operations with sudo (nopasswd) (deprecated, use
                        become)
    -U SUDO_USER, --sudo-user=SUDO_USER
                        desired sudo user (default=root) (deprecated, use
                        become)
    -S, --su            run operations with su (deprecated, use become)
    -R SU_USER, --su-user=SU_USER
                        run operations with su as this user (default=None)
                        (deprecated, use become)
    -b, --become        run operations with become (does not imply password
                        prompting)
    --become-method=BECOME_METHOD
                        privilege escalation method to use (default=sudo),
                        valid choices: [ sudo | su | pbrun | pfexec | doas |
                        dzdo | ksu | runas | pmrun ]
    --become-user=BECOME_USER
                        run operations as this user (default=root)
    --ask-sudo-pass     ask for sudo password (deprecated, use become)
    --ask-su-pass       ask for su password (deprecated, use become)
    -K, --ask-become-pass
                        ask for privilege escalation password
[[email protected] ~]# help ansible-playbook
-bash: help: 没有与 `ansible-playbook‘ 匹配的帮助主题。尝试 `help help‘ 或者 `man -k ansible-playbook‘ 或者 `info ansible-playbook‘。
[[email protected] ~]# ansible-playbook


Usage: ansible-playbook [options] playbook.yml [playbook2 ...]

Runs Ansible playbooks, executing the defined tasks on the targeted hosts.

Options:
  --ask-vault-pass      ask for vault password
  -C, --check           don‘t make any changes; instead, try to predict some
                        of the changes that may occur
  -D, --diff            when changing (small) files and templates, show the
                        differences in those files; works great with --check
  -e EXTRA_VARS, --extra-vars=EXTRA_VARS
                        set additional variables as key=value or YAML/JSON, if
                        filename prepend with @
  --flush-cache         clear the fact cache
  --force-handlers      run handlers even if a task fails
  -f FORKS, --forks=FORKS
                        specify number of parallel processes to use
                        (default=5)
  -h, --help            show this help message and exit
  -i INVENTORY, --inventory=INVENTORY, --inventory-file=INVENTORY
                        specify inventory host path or comma separated host
                        list. --inventory-file is deprecated
  -l SUBSET, --limit=SUBSET
                        further limit selected hosts to an additional pattern
  --list-hosts          outputs a list of matching hosts; does not execute
                        anything else
  --list-tags           list all available tags
  --list-tasks          list all tasks that would be executed
  -M MODULE_PATH, --module-path=MODULE_PATH
                        prepend colon-separated path(s) to module library
                        (default=[u‘/root/.ansible/plugins/modules‘,
                        u‘/usr/share/ansible/plugins/modules‘])
  --new-vault-id=NEW_VAULT_ID
                        the new vault identity to use for rekey
  --new-vault-password-file=NEW_VAULT_PASSWORD_FILES
                        new vault password file for rekey
  --skip-tags=SKIP_TAGS
                        only run plays and tasks whose tags do not match these
                        values
  --start-at-task=START_AT_TASK
                        start the playbook at the task matching this name
  --step                one-step-at-a-time: confirm each task before running
  --syntax-check        perform a syntax check on the playbook, but do not
                        execute it
  -t TAGS, --tags=TAGS  only run plays and tasks tagged with these values
  --vault-id=VAULT_IDS  the vault identity to use
  --vault-password-file=VAULT_PASSWORD_FILES
                        vault password file
  -v, --verbose         verbose mode (-vvv for more, -vvvv to enable
                        connection debugging)
  --version             show program‘s version number and exit

  Connection Options:
    control as whom and how to connect to hosts

    -k, --ask-pass      ask for connection password
    --private-key=PRIVATE_KEY_FILE, --key-file=PRIVATE_KEY_FILE
                        use this file to authenticate the connection
    -u REMOTE_USER, --user=REMOTE_USER
                        connect as this user (default=None)
    -c CONNECTION, --connection=CONNECTION
                        connection type to use (default=smart)
    -T TIMEOUT, --timeout=TIMEOUT
                        override the connection timeout in seconds
                        (default=10)
    --ssh-common-args=SSH_COMMON_ARGS
                        specify common arguments to pass to sftp/scp/ssh (e.g.
                        ProxyCommand)
    --sftp-extra-args=SFTP_EXTRA_ARGS
                        specify extra arguments to pass to sftp only (e.g. -f,
                        -l)
    --scp-extra-args=SCP_EXTRA_ARGS
                        specify extra arguments to pass to scp only (e.g. -l)
    --ssh-extra-args=SSH_EXTRA_ARGS
                        specify extra arguments to pass to ssh only (e.g. -R)

  Privilege Escalation Options:
    control how and which user you become as on target hosts

    -s, --sudo          run operations with sudo (nopasswd) (deprecated, use
                        become)
    -U SUDO_USER, --sudo-user=SUDO_USER
                        desired sudo user (default=root) (deprecated, use
                        become)
    -S, --su            run operations with su (deprecated, use become)
    -R SU_USER, --su-user=SU_USER
                        run operations with su as this user (default=None)
                        (deprecated, use become)
    -b, --become        run operations with become (does not imply password
                        prompting)
    --become-method=BECOME_METHOD
                        privilege escalation method to use (default=sudo),
                        valid choices: [ sudo | su | pbrun | pfexec | doas |
                        dzdo | ksu | runas | pmrun ]
    --become-user=BECOME_USER
                        run operations as this user (default=root)
    --ask-sudo-pass     ask for sudo password (deprecated, use become)
    --ask-su-pass       ask for su password (deprecated, use become)
    -K, --ask-become-pass

以上是关于ansible-playbook -1 参数说明的主要内容,如果未能解决你的问题,请参考以下文章

ansible-playbook 可用参数

ansible-playbook 可用参数

VBA的有参过程定义,形参用啥说明

ansible-playbook之修改ssh端口和limits参数控制

ansible-playbook 主机变量2

类的无参方法