安装supervisor(4.0.3)

Posted 2022-02-20 xingxiz

#安装4.0.3最新版

pip install supervisor -i http://pypi.douban.com/simple

 

#/etc/init.d/supervisor文件写入开机自启动脚本

#! /bin/sh
#
# skeleton      example file to build /etc/init.d/ scripts.
#               This file should be used to construct scripts for /etc/init.d.
#
#               Written by Miquel van Smoorenburg <[email protected]>.
#               Modified for Debian
#               by Ian Murdock <[email protected]>.
#               Further changes by Javier Fernandez-Sanguino <[email protected]>
#
# Version:      @(#)skeleton  1.9  26-Feb-2001  [email protected]
#
### BEGIN INIT INFO
# Provides:          supervisor
# Required-Start:    $remote_fs $network $named
# Required-Stop:     $remote_fs $network $named
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start/stop supervisor
# Description:       Start/stop supervisor daemon and its configured
#                    subprocesses.
### END INIT INFO

. /lib/lsb/init-functions

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/local/bin/supervisord
NAME=supervisord
DESC=supervisor

test -x $DAEMON || exit 0

LOGDIR=/var/log/supervisor
PIDFILE=/var/run/$NAME.pid
DODTIME=5                   # Time to wait for the server to die, in seconds
                            # If this value is set too low you might not
                            # let some servers to die gracefully and
                            # ‘restart‘ will not work

# Include supervisor defaults if available
if [ -f /etc/default/supervisor ] ; then
        . /etc/default/supervisor
fi
DAEMON_OPTS="-c /etc/supervisor/supervisord.conf $DAEMON_OPTS"

set -e

running_pid()

    # Check if a given process pid‘s cmdline matches a given name
    pid=$1
    name=$2
    [ -z "$pid" ] && return 1
    [ ! -d /proc/$pid ] &&  return 1
    (cat /proc/$pid/cmdline | tr "\000" "\n"|grep -q $name) || return 1
    return 0


running()

# Check if the process is running looking at /proc
# (works for all users)

    # No pidfile, probably no daemon present
    [ ! -f "$PIDFILE" ] && return 1
    # Obtain the pid and check it against the binary name
    pid=`cat $PIDFILE`
    running_pid $pid $DAEMON || return 1
    return 0


force_stop() 
# Forcefully kill the process
    [ ! -f "$PIDFILE" ] && return
    if running ; then
        kill -15 $pid
        # Is it really dead?
        [ -n "$DODTIME" ] && sleep "$DODTIME"s
        if running ; then
            kill -9 $pid
            [ -n "$DODTIME" ] && sleep "$DODTIME"s
            if running ; then
                echo "Cannot kill $LABEL (pid=$pid)!"
                exit 1
            fi
        fi
    fi
    rm -f $PIDFILE
    return 0


case "$1" in
  start)
        echo -n "Starting $DESC: "
        start-stop-daemon --start --quiet --pidfile $PIDFILE                 --startas $DAEMON -- $DAEMON_OPTS
        test -f $PIDFILE || sleep 1
        if running ; then
            echo "$NAME."
        else
            echo " ERROR."
        fi
        ;;
  stop)
        echo -n "Stopping $DESC: "
        start-stop-daemon --stop --quiet --oknodo --pidfile $PIDFILE 
        echo "$NAME."
        ;;
  force-stop)
        echo -n "Forcefully stopping $DESC: "
        force_stop
        if ! running ; then
            echo "$NAME."
        else
            echo " ERROR."
        fi
        ;;
  #reload)
        #
        #       If the daemon can reload its config files on the fly
        #       for example by sending it SIGHUP, do it here.
        #
        #       If the daemon responds to changes in its config file
        #       directly anyway, make this a do-nothing entry.
        #
        # echo "Reloading $DESC configuration files."
        # start-stop-daemon --stop --signal 1 --quiet --pidfile         #       /var/run/$NAME.pid --exec $DAEMON
  #;;
  force-reload)
        #
        #       If the "reload" option is implemented, move the "force-reload"
        #       option to the "reload" entry above. If not, "force-reload" is
        #       just the same as "restart" except that it does nothing if the
        #   daemon isn‘t already running.
        # check wether $DAEMON is running. If so, restart
        start-stop-daemon --stop --test --quiet --pidfile $PIDFILE         --startas $DAEMON         && $0 restart         || exit 0
        ;;
  restart)
    echo -n "Restarting $DESC: "
    start-stop-daemon --stop --quiet --oknodo --pidfile $PIDFILE
        [ -n "$DODTIME" ] && sleep $DODTIME
        start-stop-daemon --start --quiet --pidfile $PIDFILE                 --startas $DAEMON -- $DAEMON_OPTS
        echo "$NAME."
        ;;
  status)
    echo -n "$LABEL is "
    if running ;  then
        echo "running"
    else
        echo " not running."
        exit 1
    fi
    ;;
  *)
        N=/etc/init.d/$NAME
        # echo "Usage: $N start|stop|restart|reload|force-reload" >&2
        echo "Usage: $N start|stop|restart|force-reload|status|force-stop" >&2
        exit 1
        ;;
esac

exit 0

 

#添加执行权限

chmod +x /etc/init.d/supervisor

 

#添加service和开机自启动

cd /etc/init.d
update-rc.d supervisor defaults

 

 #创建supervisor依赖的文件夹

mkdir -p /etc/supervisor/conf.d
mkdir /var/log/supervisor

 

#添加/etc/supervisor/supervisord.conf配置文件

; supervisor config file

[unix_http_server]
file=/var/run/supervisor.sock   ; (the path to the socket file)
chmod=0700                       ; sockef file mode (default 0700)

[supervisord]
logfile=/var/log/supervisor/supervisord.log ; (main log file;default /supervisord.log)
pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
childlogdir=/var/log/supervisor            ; (‘AUTO‘ child log dir, default )

; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface

[supervisorctl]
serverurl=unix:///var/run/supervisor.sock ; use a unix:// URL  for a unix socket

; The [include] section can just contain the "files" setting.  This
; setting can list multiple files (separated by whitespace or
; newlines).  It can also contain wildcards.  The filenames are
; interpreted as relative to this file.  Included files *cannot*
; include files themselves.

[include]
files = /etc/supervisor/conf.d/*.conf

 

#启动supervisor服务

service supervisor start

 

PS:由于线上apt-get安装的supervisor默认版本都是3.0b2这个版本，而这个版本很多业务都出现过supervisorctl重启应用卡住的情况，实际上就是执行成功了，却没有返回导致卡住，所以发版的时候就会hang在那里。google了一圈基本都尝试过也没有好的办法，而升级版本是可以解决这个问题的。。

详见:

https://github.com/Supervisor/supervisor/issues/131

如果线上已经在用的supervisor的，可以直接用pip install -U supervisor -i http://pypi.douban.com/simple，然后把/etc/init.d/supervisor文件中的DAEMON=/usr/bin/supervisord替换成DAEMON=/usr/local/bin/supervisord，再重启supervisor服务就好了，不过这样的做法会影响线上supervisor纳管的所有应用不可用(大概10s)，所以要先和业务沟通哦^_^