Linux网络编程——TCP和UDP通信

Posted 2021-11-26 mered1th

tags:

篇首语：本文由小常识网(cha138.com)小编为大家整理，主要介绍了Linux网络编程——TCP和UDP通信相关的知识，希望对你有一定的参考价值。

TCP协议流程图、TCP建立即时聊天
TCP即时聊天升级：服务器在客户端断开后不断开，客户端可以多次重连服务器进行即时聊天
UDP协议流程图、UDP建立即时连接
如果在已经处于 ESTABLISHED状态下的socket(一般由端口号和标志符区分）需调用closesocket（一般不会立即关闭而经历TIME_WAIT的过程）后想继续重用该socket，但也可以直接用setsockopt和reuse。
SO_RCVLOWAT设置接收缓冲区下限

1、TCP协议的流程图

服务端：socket---bind---listen---while(1){---accept---recv---send---close---}---close
客户端：socket----------------------------------connect---send---recv-----------------close

技术图片

TCP建立即时聊天

tcp_client.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd=socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd,-1,"socket");
    struct sockaddr_in ser;
    bzero(&ser,sizeof(ser));
    ser.sin_family=AF_INET;
    ser.sin_port=htons(atoi(argv[2]));
    ser.sin_addr.s_addr=inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret=connect(socketFd,(struct sockaddr*)&ser,sizeof(ser));
    ERROR_CHECK(ret, -1, "connect");
    printf("connect success\\n");
    char buf[128]={0};
    fd_set rdset;
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(socketFd, &rdset);
        ret = select(socketFd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(socketFd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(socketFd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\\n");
                break;
            }
            printf("%s\\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\\n");
                break;
            }
            ret = send(socketFd, buf ,strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(socketFd);
}

tcp_server.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd = socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    listen(socketFd, 10);//缓冲区的大小，一瞬间能够放入的客户端连接信息
    int new_fd;
    struct sockaddr_in client;
    bzero(&client, sizeof(client));
    int addrlen = sizeof(client);
    new_fd = accept(socketFd, (struct sockaddr*)&client, &addrlen);
    ERROR_CHECK(new_fd, -1, "accept");
    printf("client ip=%s, port=%d\\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    fd_set rdset;
    char buf[128] = {0};
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(new_fd, &rdset);
        ret = select(new_fd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(new_fd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(new_fd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\\n");
                break;
            }
            printf("%s\\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\\n");
                break;
            }
            ret = send(new_fd, buf, strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(new_fd);
    close(socketFd);
    return 0;
}

2、TCP即时聊天升级：服务器在客户端断开后不断开，客户端可以多次重连服务器进行即时聊天

tcp_server.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd = socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    listen(socketFd, 10);//缓冲区的大小，一瞬间能够放入的客户端连接信息
    int new_fd;
    struct sockaddr_in client;
    bzero(&client, sizeof(client));
    int addrlen = sizeof(client);
    char buf[128] = {0};
    fd_set rdset; 
    fd_set needMonitorSet; //需要监听的描述符集合
    FD_ZERO(&needMonitorSet);  
    FD_SET(STDIN_FILENO, &needMonitorSet);
    FD_SET(socketFd, &needMonitorSet);
    while(1){
        memcpy(&rdset, &needMonitorSet, sizeof(fd_set));
        ret = select(11, &rdset, NULL, NULL, NULL); //设最大监控描述符为10
        if(FD_ISSET(socketFd, &rdset)){ //如果监听到客户端则accept接受远程计算机的连接请求
            new_fd = accept(socketFd, (struct sockaddr*)&client, &addrlen); //accept函数接受一个连接时，会返回一个新的socket标识符，以后数据的数据传输和读取就要通过这个新的socket编号来处理，原来的socket继续监听其他客户机的连接请求。
            ERROR_CHECK(new_fd, -1, "accept");
            printf("client ip=%s, port=%d\\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
            FD_SET(new_fd, &needMonitorSet);    
        }
        if(FD_ISSET(new_fd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(new_fd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\\n");
                FD_CLR(new_fd, &needMonitorSet);  //从needMonitorSet中删除new_fd
                close(new_fd);
                continue;
            }
            printf("%s\\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\\n");
                break;
            }
            ret = send(new_fd, buf, strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(socketFd);
    return 0;
}

tcp_client.c和1同

3、使用UDP协议的流程图

服务端：socket---bind---recvfrom---sendto---close
客户端：socket----------sendto---recvfrom---close

技术图片

sendto()函数原型：
int sendto(int sockfd, const void msg,int len,unsigned int flags,const struct sockaddr to, int tolen);

该函数比send()函数多了两个参数，to表示目地机的IP地址和端口号信息，而tolen常常被赋值为sizeof (struct sockaddr)。sendto 函数也返回实际发送的数据字节长度或在出现发送错误时返回-1。
recvfrom()函数原型：

**int recvfrom(int sockfd,void buf,int len,unsigned int flags,struct sockaddr from,int *fromlen);**
from是一个struct sockaddr类型的变量，该变量保存连接机的IP地址及端口号。fromlen常置为sizeof (struct sockaddr)。当recvfrom()返回时，fromlen包含实际存入from中的数据字节数。Recvfrom()函数返回接收到的字节数或当出现错误时返回-1，并置相应的errno。

UDP传输一个数据报示例：

udp_server.c

#include <func.h>

int main(int argc, char **argv){
    ARGS_CHECK(argc, 3);
    int socketFd;
    socketFd = socket(AF_INET, SOCK_DGRAM, 0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser,sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    char buf[128] = {0};
    struct sockaddr_in client;
    int addrlen = sizeof(client);
    ret = recvfrom(socketFd, buf, 5, 0, (struct sockaddr*)&client, &addrlen);
    ERROR_CHECK(ret, -1, "recvfrom");
    printf("client ip = %s, port = %d\\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    printf("udp server gets %s\\n", buf);
    //bzero(buf, sizeof(buf));
    //ret = recvfrom(socketFd, buf, 5, 0, (struct sockaddr*)&client, &addrlen);
    //ERROR_CHECK(ret, -1, "recvfrom");
    //printf("udp server gets %s\\n", buf);
    ret = sendto(socketFd, "world", 5, 0, (struct sockaddr*)&client, sizeof(client));
    ERROR_CHECK(ret, -1, "sendto");
    close(socketFd);
    return 0;
}

udp_client.c

#include <func.h>

int main(int argc, char *argv[]){
    ARGS_CHECK(argc, 3);
    int socketFd;
    socketFd = socket(AF_INET, SOCK_DGRAM, 0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);
    int ret;
    ret = sendto(socketFd, "helloworld", 10, 0, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "sendto");
    char buf[128] = {0};
    ret = recvfrom(socketFd, buf, sizeof(buf), 0, NULL, NULL);
    ERROR_CHECK(ret, -1, "recvfrom");
    printf("udp client gets %s\\n", buf);
    close(socketFd);
    return 0;
}

4、使用UDP协议建立即时连接

udp_server.c

#include <func.h>

int main(int argc, char **argv){
    ARGS_CHECK(argc, 3);
    int socketFd;
    socketFd = socket(AF_INET, SOCK_DGRAM, 0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser,sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    int ret;
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    char buf[128] = {0};
    struct sockaddr_in client;
    int addrlen = sizeof(client);
    printf("client ip = %s, port = %d\\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    fd_set rdset;
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(socketFd, &rdset);
        ret = select(socketFd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(socketFd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recvfrom(socketFd, buf, sizeof(buf), 0, (struct sockaddr*)&client, &addrlen);
            ERROR_CHECK(ret, -1, "recvfrom");
            printf("%s\\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            bzero(buf, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(0 == ret){
                printf("byeybye\\n");
                break;
            }
            ret = sendto(socketFd, buf, strlen(buf) - 1, 0, (struct sockaddr*)&client, sizeof(client));
            ERROR_CHECK(ret, -1, "sendto");
        }
    }
    close(socketFd);
    return 0;
}

udp_client.c

#include <func.h>

int main(int argc, char *argv[]){
    ARGS_CHECK(argc, 3);
    int socketFd;
    socketFd = socket(AF_INET, SOCK_DGRAM, 0);
    ERROR_CHECK(socketFd, -1, "socket");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);
    int ret;
    char buf[128] = {0};
    fd_set rdset;
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(socketFd, &rdset);
        ret = select(socketFd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(socketFd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recvfrom(socketFd, buf, sizeof(buf), 0, NULL, NULL);
            ERROR_CHECK(ret, -1, "recvfrom");
            printf("%s\\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            bzero(buf, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(0 == ret){
                printf("byeybye\\n");
                break;
            }
            ret = sendto(socketFd, buf, strlen(buf) - 1, 0, (struct sockaddr*)&ser, sizeof(ser));
            ERROR_CHECK(ret, -1, "sendto");
        }
    }
    close(socketFd);
    return 0;
}

5、如果在已经处于 ESTABLISHED状态下的socket(一般由端口号和标志符区分）需调用closesocket（一般不会立即关闭而经历TIME_WAIT的过程）后想继续重用该socket，但也可以直接用setsockopt和reuse。

int reuse=1;
setsockopt(s,SOL_SOCKET ,SO_REUSEADDR,(const char*)&reuse,sizeof(int));

tcp_server.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd = socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd, -1, "socket");
    int ret;
    int reuse = 1;
    ret = setsockopt(socketFd, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof(int));
    ERROR_CHECK(ret, -1, "setsockopt");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    listen(socketFd, 10);//缓冲区的大小，一瞬间能够放入的客户端连接信息
    int new_fd;
    struct sockaddr_in client;
    bzero(&client, sizeof(client));
    int addrlen = sizeof(client);
    new_fd = accept(socketFd, (struct sockaddr*)&client, &addrlen);
    ERROR_CHECK(new_fd, -1, "accept");
    printf("client ip=%s, port=%d\\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    fd_set rdset;
    char buf[128] = {0};
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(new_fd, &rdset);
        ret = select(new_fd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(new_fd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(new_fd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\\n");
                break;
            }
            printf("%s\\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\\n");
                break;
            }
            ret = send(new_fd, buf, strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(new_fd);
    close(socketFd);
    return 0;
}

tcp_client.c和1同

6、SO_RCVLOWAT：接收缓冲区下限

tcp_server_rcvlowat.c

#include <func.h>

int main(int argc,char* argv[])
{
    ARGS_CHECK(argc,3);
    int socketFd;
    socketFd = socket(AF_INET,SOCK_STREAM,0);
    ERROR_CHECK(socketFd, -1, "socket");
    int ret;
    int reuse = 1;
    ret = setsockopt(socketFd, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof(int));
    ERROR_CHECK(ret, -1, "setsockopt");
    struct sockaddr_in ser;
    bzero(&ser, sizeof(ser));
    ser.sin_family = AF_INET;
    ser.sin_port = htons(atoi(argv[2]));
    ser.sin_addr.s_addr = inet_addr(argv[1]);//点分十进制转为32位的网络字节序
    ret = bind(socketFd, (struct sockaddr*)&ser, sizeof(ser));
    ERROR_CHECK(ret, -1, "bind");
    listen(socketFd, 10);//缓冲区的大小，一瞬间能够放入的客户端连接信息
    int new_fd;
    struct sockaddr_in client;
    bzero(&client, sizeof(client));
    int addrlen = sizeof(client);
    new_fd = accept(socketFd, (struct sockaddr*)&client, &addrlen);
    ERROR_CHECK(new_fd, -1, "accept");
    printf("client ip=%s, port=%d\\n", inet_ntoa(client.sin_addr), ntohs(client.sin_port));
    fd_set rdset;
    char buf[128] = {0};
    int rcvLowAt = 10;
    ret=setsockopt(new_fd,SOL_SOCKET,SO_RCVLOWAT,&rcvLowAt,sizeof(int));

    ERROR_CHECK(ret, -1, "setsockopt");
    while(1){
        FD_ZERO(&rdset);
        FD_SET(STDIN_FILENO, &rdset);
        FD_SET(new_fd, &rdset);
        ret = select(new_fd + 1, &rdset, NULL, NULL, NULL);
        if(FD_ISSET(new_fd, &rdset)){
            bzero(buf, sizeof(buf));
            ret = recv(new_fd, buf, sizeof(buf), 0);
            ERROR_CHECK(ret, -1, "recv");
            if(ret == 0){
                printf("byebye!\\n");
                break;
            }
            printf("%s\\n", buf);
        }
        if(FD_ISSET(STDIN_FILENO, &rdset)){
            memset(buf, 0, sizeof(buf));
            ret = read(STDIN_FILENO, buf, sizeof(buf));
            if(ret == 0){
                printf("byebye!\\n");
                break;
            }
            ret = send(new_fd, buf, strlen(buf) - 1, 0);
            ERROR_CHECK(ret, -1, "send");
        }
    }
    close(new_fd);
    close(socketFd);
    return 0;
}

tcp_client.c和1同

以上是关于Linux网络编程——TCP和UDP通信的主要内容，如果未能解决你的问题，请参考以下文章

Python 之 Socket编程(TCP/UDP)

linux 网络编程

linux系统socket通信编程详解函数

关于网络通信中TCP/UDP的端口范围-以及在Linux系统中的使用权限说明

网络通信协议：TCP（三次握手四次挥手）和UDP

Linux网络编程传输层 TCP/UDP